« previous next »
Pages: [1]   Go Down

Author Topic: 77 CB750 Time for a new clutch, which brand to choose??  (Read 2821 times)

0 Members and 1 Guest are viewing this topic.

Offline CB750R

  • Hot Shot
  • ***
  • Posts: 609
  • 77 CB750F
77 CB750 Time for a new clutch, which brand to choose??
« on: April 13, 2005, 09:15:54 AM »
Hey I've been looking online for clutch kits, and it seems that only the friction plates are available aftermarket, not the steel plates, should I get both when replacing?? Which brand has a good rep?  should I opt for stiffer clutch springs? I have a K motor in an F chassis. 

Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,565
  • Big ideas....
Re: 77 CB750 Time for a new clutch, which brand to choose??
« Reply #1 on: April 13, 2005, 10:01:22 AM »
Use OEM friction and steel plates. Soak the frictions in fresh oil before assembling. Barnett extra plate kits are to thick which makes it difficult to find neutral at stop lights etc. Barnett springs are stronger and work well.
Logged
Owner of the "Million Dollar CB"

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: 77 CB750 Time for a new clutch, which brand to choose??
« Reply #2 on: April 13, 2005, 03:42:07 PM »
In both my 650s I used the cheap plates with HD springs.  Drag bike has been goin 8yrs or so like this.



                      Terry
Logged
18 grand and 18 miles dont make you a biker
Pages: [1]   Go Up
« previous next »