Author Topic: Yoshimura Exhaust (Read 79490 times)

JAG · « **on:** January 18, 2008, 11:04:35 pm »

Anyone know where to find online where I may purchase a 4-1 Yoshimura Exhaust for a cb750?

Is there anything 'like' the Yoshimura Exhaust, that people prefer or is a little more cheaper?

Thanks

JAG

mkramer1121 · « **Reply #1 on:** January 18, 2008, 11:34:07 pm »

check yamiya750e.com for a similar exhaust made by a performance company in japan. you could alos bid on one using yahoo japan, however they are no longer manufactured.

SteveD CB500F · « **Reply #2 on:** January 19, 2008, 04:42:40 am »

Yoshi still make exhausts. They are available for big Zeds and are expensive (£560)

Their UK distributor is www.singlestosuperbikes.co.uk

sbc1320 · « **Reply #3 on:** January 19, 2008, 05:13:00 am »

Looked like one and was brand new I bleieve. Went for over $500 on Ebay about two weeks back. Said it was awesome sounding. Good luck.

goon 1492 · « **Reply #4 on:** January 19, 2008, 05:39:44 am »

hope this link works its motorcycle accessory wharehouse they have yoshimura, vance and hines, kerker,etc. i don't think they have pictures of things but you can request a catalogue and it pretty thick, all kinds of riding goodies tires pipes.....

http://www.accwhse.com/

736cc · « **Reply #5 on:** January 19, 2008, 06:28:05 am »

Yoshimura made 2 types, hand-bent and machine-made. The hand-bents had very sexy continuous-curved header pipes and are kinda cobby-looking. Pops himself made very few of these, extremely rare. Heres a pic of my hand-bent Yosh pipe. Sounds totally sick is an understatement. Wish I knew somebody to reproduce it.

MRieck · « **Reply #6 on:** January 19, 2008, 06:36:27 am »

Quote from: 736cc on January 19, 2008, 06:28:05 am

Yoshimura made 2 types, hand-bent and machine-made. The hand-bents had very sexy continuous-curved header pipes and are kinda cobby-looking. Pops himself made very few of these, extremely rare. Heres a pic of my hand-bent Yosh pipe. Sounds totally sick is an understatement. Wish I knew somebody to reproduce it.

That pipe is begging to be ceramic coated. I can hear it telling me that from here.

736cc · « **Reply #7 on:** January 19, 2008, 06:40:30 am »

Its off the bike and getting ceramic coated this week. Satin black ceramic (or should I go polished aluminum finish?)

jkotsi · « **Reply #8 on:** January 19, 2008, 06:58:57 am »

Black would look fantastic!

Is the muffler on the pipe? You should post pics of the before/after coating.

Jim

Bodi · « **Reply #9 on:** January 19, 2008, 07:47:02 am »

muffler?
we don't need no steenking mufflers!

736cc · « **Reply #10 on:** January 19, 2008, 08:27:40 am »

w/o a baffle this pipe makes the SCARIEST DEEP BELLOW IMAGINABLE but everytime I run it like that on street, its definately a ticket-magnet.

JAG · « **Reply #11 on:** January 19, 2008, 09:18:25 am »

I was going to get one through carpy. He was charging $1000 usd for it, I wanted to do some shopping around and try and find them myself..

Thanks for the help, I shot an e-mail to singles to superbikes, and I requested a catalog from the other site..

Thanks guys.

mkramer1121 · « **Reply #12 on:** January 19, 2008, 09:26:52 am »

Quote from: SteveD CB500F on January 19, 2008, 04:42:40 am

Yoshi still make exhausts. They are available for big Zeds and are expensive (£560)

Their UK distributor is www.singlestosuperbikes.co.uk

For a 750, I had emailed Yosh Japan and they said they no longer had stock and had stopped manufacturing them as there wasn't a demand for them.

Jim F · « **Reply #13 on:** January 19, 2008, 09:51:27 am »

Quote from: MRieck on January 19, 2008, 06:36:27 am

Quote from: 736cc on January 19, 2008, 06:28:05 am
Yoshimura made 2 types, hand-bent and machine-made. The hand-bents had very sexy continuous-curved header pipes and are kinda cobby-looking. Pops himself made very few of these, extremely rare. Heres a pic of my hand-bent Yosh pipe. Sounds totally sick is an understatement. Wish I knew somebody to reproduce it.

That pipe is begging to be ceramic coated. I can hear it telling me that from here.

Heres my full race system that I have had for over 20 years on my GS and a
competition baffle
Jim

SteveD CB500F · « **Reply #14 on:** January 19, 2008, 09:52:16 am »

There must be more surviving 750/4s in the world than Z1s (surely)

There must be a market...

mkramer1121 · « **Reply #15 on:** January 19, 2008, 09:54:18 am »

All I'm saying is I contacted them and they no longer produce them, stopped making them a few years ago...

736cc · « **Reply #16 on:** January 19, 2008, 11:00:11 am »

Who can reproduce my pipe?

754 · « **Reply #17 on:** January 19, 2008, 11:18:31 am »

Try to figure out the bend radius. I suspect most headers started out as a hand bent prototype before thety went to mass production... so you should be able to make them.

Looks like there is a G-note of saving in it for you if you pull it off!!

goon 1492 · « **Reply #18 on:** January 19, 2008, 11:24:43 am »

+1 and then its custom

Jeff · « **Reply #19 on:** January 19, 2008, 01:42:01 pm »

Could you go to your local muffler shop? Maybe they'd be able to customize something for you.

Jeff

JAG · « **Reply #20 on:** January 19, 2008, 03:21:34 pm »

Carpy gets them somehow.. They are on all of his bikes. I love the look of them. The end of it kind of sneaks out past the foot peg.

I have never really been a big fan of the megaphones. But to each his own, right?!

This pic has one of them on there.. That's also the style I am trying to go for.. I wander how hard it would be to make you own knee inserts into the gas tank?? Any thoughts on that?

mkramer1121 · « **Reply #21 on:** January 19, 2008, 03:35:15 pm »

They look like the replica ones I was talking about, see here (Yamiya doesn't show them on their English site anymore):

http://yamiya750.com/eshopdo/refer/refer.php?sid=zeksrv7&cid=7&scid=&vmode=&view_id=M011

JAG · « **Reply #22 on:** January 19, 2008, 03:50:56 pm »

That's definitely them! It showed a picture of it. I can't get the download right on the Japanese translation thing.. How much do they run, shipping and all?

mkramer1121 · « **Reply #23 on:** January 19, 2008, 03:54:31 pm »

They are $350 plus shipping (probably ~$50). They have an English site, yamiya750e.com, but they weren't listed on there today when I looked. They also have chrome ones. Maybe contact them through their English site.

They are manufactured by KSY out of Japan, see link here:

http://www.autoparts-ksy.co.jp/

JAG · « **Reply #24 on:** January 19, 2008, 04:14:51 pm »

Well then I wonder why I was going to be charged $1000 for them.. Is there something different that I just don't know about???

News:

Author Topic: Yoshimura Exhaust (Read 79490 times)

sbc1320