Author Topic: AAAAAAAAAAAAAAAHH!!!!!!!!!!!!! (Read 17243 times)

Spikeybike · « **Reply #50 on:** February 17, 2008, 10:36:54 AM »

if any of you need any fab work of ANY kind , name it and it's done
i dont care how small or large, custom brackets, scrap steel chunks, raw plate ..anything
if i can do it i will
i really feel all warm and gooey inside

...

the understatement of the day: "i love this ~~site~~ community"

FunJimmy · « **Reply #51 on:** February 17, 2008, 10:56:31 AM »

Spikey

You gonna be real busy without offering your services to us dude.

Just back from diggin in the garage and I'll add to my wiring harness offer, 1 headlight and 2 good condition factory coils.

Let me know what you want and where to send them.

Jimmy

Spikeybike · « **Reply #52 on:** February 17, 2008, 11:14:26 AM »

Quote from: FunJimmy on February 17, 2008, 10:56:31 AM

Spikey

Your gonna be real busy without offering your services to us dude.

I'd be doing that stuff at work , getting paid to do it

(i get two hours of (paid) brakes a day)

PM sent

Spikeybike · « **Reply #53 on:** February 17, 2008, 12:14:01 PM »

so i was wondering if i should replace my drive chain, i dont think it got too hot (the paint on the chain guard isn't even bubbled)

any opinions

Roach Carver · « **Reply #54 on:** February 17, 2008, 12:15:59 PM »

is it an o-ring?

Spikeybike · « **Reply #55 on:** February 17, 2008, 12:29:46 PM »

Quote from: 71cb750 on February 17, 2008, 12:15:59 PM

is it an o-ring?

no

Spikeybike · « **Reply #56 on:** February 17, 2008, 12:30:50 PM »

and it's pressed (not master link)

Roach Carver · « **Reply #57 on:** February 17, 2008, 12:36:09 PM »

purely a guess, but if it was a sheet that burned I would guess the heat was hot but brief. I would take it off and give it a good look for any discoloration, lube and use it.

Spikeybike · « **Reply #58 on:** February 17, 2008, 12:39:52 PM »

thats kinda what i figured , i just wanted to hear it from someone else too

Spikeybike · « **Reply #59 on:** February 17, 2008, 12:44:28 PM »

well i guess i've put it off long enough, time to get my a$$ in the garage and get started

bag of rags, check
dust mask, check
jersey gloves, check
big box of tissue

, check

wish me luck

hymodyne · « **Reply #60 on:** February 17, 2008, 12:51:52 PM »

Sent you a PM about the Gaitors...

hym

neil young · « **Reply #61 on:** February 17, 2008, 01:37:01 PM »

I don't know if you remember but i posted in your seat thread about my mini turn signals.
well it looks like yours are melted.and since i havn't installed them yet (they are cool looking with little visors)they are yours if you need them.
pics in an hour

jesus freek · « **Reply #62 on:** February 17, 2008, 04:35:56 PM »

Spikey
I dont have the words.
Im so so sorry.
If there is anyone in our "little community" that could turn a negative into a possitive its YOU!
Good luck with the rebuild.
Gordon

CBGhia · « **Reply #63 on:** February 17, 2008, 05:00:06 PM »

Hey Spikey,
I have the throttle cables if you still need them. I also have a stock rear fender if you need that. I know yours was custom, but I thought it started life stock.

Spikeybike · « **Reply #64 on:** February 17, 2008, 05:09:24 PM »

Quote from: CBGhia on February 17, 2008, 05:00:06 PM

Hey Spikey,
I have the throttle cables if you still need them. I also have a stock rear fender if you need that. I know yours was custom, but I thought it started life stock.

PM sent

GeoffT · « **Reply #65 on:** February 17, 2008, 05:21:11 PM »

Spikey, thats so tragic. I'm afraid I don't have any spares at all but I know your ride will be back all new and even better than before. Looks like it is going to be a real SOHC community effort as well. This site never ceases to amaze me. Well done guys.

All the best for the rebuild Spikey.

Geoff

neil young · « **Reply #66 on:** February 17, 2008, 07:04:33 PM »

Quote from: neil young on February 17, 2008, 01:37:01 PM

I don't know if you remember but i posted in your seat thread about my mini turn signals.
well it looks like yours are melted.and since i havn't installed them yet (they are cool looking with little visors)they are yours if you need them.
pics in an hour

i recieved your PM. here are some pictures of them.

HEHE....opppps didnt notice that i had some wackee tabackee in the pic

(you cant have that though )

Spikeybike · « **Reply #67 on:** February 18, 2008, 07:56:50 AM »

Quote from: neil young on February 17, 2008, 07:04:33 PM

HEHE....opppps didnt notice that i had some wackee tabackee in the pic (you cant have that though )

i do recall that post ,and they look like they will fit right in , as for the other contents of the photo ,you better keep that , i want to fix the bike , not eat a few ho-ho's and go to sleep

754 · « **Reply #68 on:** February 18, 2008, 08:45:18 AM »

Hondas use KAPTON wiring !!!... who knew !!!!

Spikeybike · « **Reply #69 on:** February 18, 2008, 10:09:22 AM »

Quote from: Mattydiah on February 18, 2008, 09:30:29 AM

Sorry to hear about your bike man. It sucks when it happens, but at the end of the day, you can rebuild the bike, what counts is that nobody was hurt.

Have you thought about the frame being exposed to that heat? Has it weakened anything? Dont wanna see you go down from a weakened frame, brother.

i had thought about that , but i'm pretty confident that it didn't get hot enough

Sam Green Racing · « **Reply #70 on:** February 18, 2008, 02:00:06 PM »

Allways the Bridesmaid...never the Bride.

This poor bike must have been the most nominated ride ever in Bike of the month.

This is truly a sad moment, but I'm sure with the help of this board you will rebuild her and she will win.

I have something you'll need, so PM me your Address.

Good luck with the rebuild Spikey

Sam.

dagersh · « **Reply #71 on:** February 19, 2008, 10:03:35 AM »

Spikey,

What a bummer man. I really liked your style on theat bike. At least no one was hurt, and and the really tough items to rebuild (i.e. that awesome tank) are safe and sound. I will look forward to the BIONIC PHOENIX SPIKEYBIKE II.....

Gersh

rachet · « **Reply #72 on:** February 19, 2008, 10:11:04 AM »

Quote

the BIONIC PHOENIX SPIKEYBIKE II.....

that is Awesome! I love it!

Badger 5 · « **Reply #73 on:** February 19, 2008, 10:17:40 AM »

Does this experience make you want to change the theme of your welding mask or do you feel one with the flames?

Spikeybike · « **Reply #74 on:** February 19, 2008, 10:34:44 AM »

Quote from: Badger 5 on February 19, 2008, 10:17:40 AM

Does this experience make you want to change the theme of your welding mask or do you feel one with the flames?

i'm a total pyro, always have been ... it was only natural for me to make a career out of it .i've always been right at home with 2000 degrees in my face. i think this is just karma coming back at me for all the havoc i caused my parents
(thats not really how i feel, but it sounded good)

and for those of you who want a better look

News:

Author Topic: AAAAAAAAAAAAAAAHH!!!!!!!!!!!!! (Read 17243 times)

jesus freek