Author Topic: "INSPIRATION GALLERY " (Read 2275287 times)

Zaipai · « **Reply #3950 on:** January 20, 2010, 04:02:04 PM »

Like that 750 Ecosse, lots o bling!!

Industrial Cafe · « **Reply #3951 on:** January 20, 2010, 04:48:58 PM »

that BMW is so tiny!

wannabridin · « **Reply #3952 on:** January 20, 2010, 06:08:15 PM »

i wonder how big that bimmer engine is!!! any other scale pics??

HavocTurbo · « **Reply #3953 on:** January 21, 2010, 12:36:46 PM »

It's a side car racer boys...

Figure an 800-1000cc motor wrapped in a pitbike chassis and wheels.

Fast and scary as all hell without the car.

BLUE71TURBO · « **Reply #3954 on:** January 21, 2010, 12:51:46 PM »

Quote from: Zaipai on January 19, 2010, 04:35:16 PM

Ohh. IC would love this bike, it has pretty holes all over it and it creates holes as you ride it!

Looks photo shopped to me. And sence when does a harley have 3 exhaust pipes ?

HavocTurbo · « **Reply #3955 on:** January 21, 2010, 12:55:53 PM »

That is infact NOT photoshopped.

I have seen the bike in person at last years Chicago Cycle World International Motorcycle Show.

Ice racer for sure.... but a trailer queen as well.

Ecosse · « **Reply #3956 on:** January 21, 2010, 02:10:35 PM »

Quote

Quote from: BLUE71TURBO on January 21, 2010, 12:51:46 PM

Looks photo shopped to me. And sence when does a harley have 3 exhaust pipes ?

yeah, 'cause otherwise it's sooo practical.

i remember "z28" camaros with "dual exhaust" that split at the end of single exhaust. gm was such a poser then.

wannabridin · « **Reply #3957 on:** January 21, 2010, 03:11:49 PM »

3 pipes, one of them could be a pipe from the wastegate on the turbo, right? or, like ecosse says, posers...

Ogri · « **Reply #3958 on:** January 21, 2010, 03:34:15 PM »

Sorry, really don't like that 'ice racer'.

"What can get us some attention, a type of bike that's not been used as a theme before? Board Racers are so passe now."
"Ice racer..HAHahahaha"
"Hmmmmm! Make a regular low-rider...put some spikes in the tires.."
"Hey, I was kidding, ice racers are light, single cylinder, spindly, they've got nothing to do with chopper culture..it'd be ridiculous"
"Now listen son, if those Orange County boys can do a Fire Truck themed chopper we can do an Ice Racer..pass me my credit card"

HavocTurbo · « **Reply #3959 on:** January 21, 2010, 04:09:17 PM »

Quote from: Ogri on January 21, 2010, 03:34:15 PM

"Board Racers are so passe now."

Watch yourself.... I might find you and make you ride a Henderson 4.

Then we'll see who's passe.

Quote from: Ogri on January 21, 2010, 03:34:15 PM

"Now listen son, if those Orange County boys can do a Fire Truck themed chopper we can do an Ice Racer..pass me my credit card"

I agree. I'll get started, you start selling tickets. The only thing I like about that bike are the tires.

Industrial Cafe · « **Reply #3960 on:** January 21, 2010, 04:20:16 PM »

I like the holes

Ecosse · « **Reply #3961 on:** January 21, 2010, 04:59:24 PM »

Quote from: Industrial Cafe on January 21, 2010, 04:20:16 PM

I like the holes

are we still talkin bikes?

Industrial Cafe · « **Reply #3962 on:** January 21, 2010, 05:04:27 PM »

Zaipai · « **Reply #3963 on:** January 21, 2010, 07:10:41 PM »

Quote from: BLUE71TURBO on January 21, 2010, 12:51:46 PM

Quote from: Zaipai on January 19, 2010, 04:35:16 PM
Ohh. IC would love this bike, it has pretty holes all over it and it creates holes as you ride it!

Looks photo shopped to me. And sence when does a harley have 3 exhaust pipes ?

Yea if you look closely it has 2 into 1 with 3 tips coming out the side.. Nice looking Ice racer!

Zaipai · « **Reply #3964 on:** January 21, 2010, 07:12:45 PM »

Quote from: Industrial Cafe on January 21, 2010, 05:04:27 PM

yes.

Hum... is that a jack shaft on that thing?

Industrial Cafe · « **Reply #3965 on:** January 21, 2010, 07:23:49 PM »

I think it's on there cause the chain would interfere with the frame without it.

wannabridin · « **Reply #3966 on:** January 21, 2010, 07:57:05 PM »

i'd love to see a build blog or video on that bike... who cares how useless it is, it's great craftsmanship! i bet it'd be a blast to ride with reg. tires on there!!

J.Webster Designs · « **Reply #3967 on:** January 21, 2010, 10:02:59 PM »

Quote from: Industrial Cafe on January 21, 2010, 07:23:49 PM

I think it's on there cause the chain would interfere with the frame without it.

IC, If you look at the original post of the picture, there is a chain on the right side of the bike as well.... I think its got a jackshaft only because he wanted to run two chains (one on each side of the wheel). That bike could have easily been made to use the a single chain off of the primary sprocket.

Edit: It looks as if the rear brake is also on the other end (right side) of the jack shaft.

Industrial Cafe · « **Reply #3968 on:** January 21, 2010, 10:11:31 PM »

oh wow, I never noticed the dual chains!

HavocTurbo · « **Reply #3969 on:** January 21, 2010, 10:24:33 PM »

Quote from: midnight08 on January 21, 2010, 10:02:59 PM

Quote from: Industrial Cafe on January 21, 2010, 07:23:49 PM
I think it's on there cause the chain would interfere with the frame without it.

IC, If you look at the original post of the picture, there is a chain on the right side of the bike as well.... I think its got a jackshaft only because he wanted to run two chains (one on each side of the wheel). That bike could have easily been made to use the a single chain off of the primary sprocket.

Edit: It looks as if the rear brake is also on the other end (right side) of the jack shaft.

Yep you are correct sir.

Most guys depending on how many CI's the v-twin is.... like 145 and up.... run dual chains because of the massive amount of torque that is available. They don't make chains big enough for the street.

Didn't the Arlen's (pa and son) make a dual belt bike for a build off?

squirley · « **Reply #3970 on:** January 21, 2010, 10:28:16 PM »

These bikes are serious inspiration for me... no matter what kind of bike fan you are, you HAVE to love the craftsmanship!!!!!

754 · « **Reply #3971 on:** January 22, 2010, 12:15:08 AM »

Midnight, you cant run that big a rear sprocket with electric start, the chain would saw thru the starter housing.

As far as I know that bike was built for a big show, maybe the AMD show, by a European builder. The pic shown, looks like near Sturgis..

BLUE71TURBO · « **Reply #3972 on:** January 22, 2010, 12:42:29 AM »

Quote from: wannabridin on January 21, 2010, 07:57:05 PM

i'd love to see a build blog or video on that bike... who cares how useless it is, it's great craftsmanship! i bet it'd be a blast to ride with reg. tires on there!!

The only way you could ride it would be down a drag strip. Not practical for turning. It does look nasty though !

Here's some real ice racing.......