Author Topic: "INSPIRATION GALLERY " (Read 2250219 times)

ev0lve · « **Reply #6800 on:** April 05, 2011, 08:37:34 AM »

Quote from: Jt500 on April 04, 2011, 06:11:52 AM

I like it.... BUT at the same time I HATE it an a funky taste starts in the back of my throat

I know. I hate those 5 spoke comstars too

Spikeybike · « **Reply #6801 on:** April 06, 2011, 02:47:29 PM »

no hotlinking on this site , so just a link
http://www.chopcult.com/photos.php

ev0lve · « **Reply #6802 on:** April 06, 2011, 07:20:35 PM »

Wow

http://www.bikeexif.com/bsa-motorcycle

Jinxracing · « **Reply #6803 on:** April 06, 2011, 08:49:36 PM »

Quote from: Iggy on April 06, 2011, 07:20:35 PM

Wow

http://www.bikeexif.com/bsa-motorcycle

I don't know if I love it or hate it...but I can't stop looking at it.

Ricky_Racer · « **Reply #6804 on:** April 06, 2011, 09:33:07 PM »

That's humbling. Wow, indeed. RR

ev0lve · « **Reply #6805 on:** April 06, 2011, 09:35:15 PM »

Read the specs - custom made frame and other freakishness.

fastbroshi · « **Reply #6806 on:** April 06, 2011, 09:55:26 PM »

Front tire is low

Flying J · « **Reply #6807 on:** April 06, 2011, 10:07:40 PM »

I wish it had more closeups. That rear suspension is pure craziness! The swing arm is connected to a chain that runs under the bike and then some how meets up with the shocks.
NUKIN FUTS i say. And i cant figure out the front forks. If you look between the forks you can see a spring on the inside. Looks like the sliders are just covers.

Found IT!!!!
http://www.flickr.com/photos/56884385@N02/5586190762/#sizes/o/in/photostream/

ev0lve · « **Reply #6808 on:** April 08, 2011, 03:09:13 PM »

Marla's half-sister - Karla?

ev0lve · « **Reply #6809 on:** April 08, 2011, 03:17:57 PM »

Quote from: ffjmoore on April 06, 2011, 10:07:40 PM

I wish it had more closeups. That rear suspension is pure craziness! The swing arm is connected to a chain that runs under the bike and then some how meets up with the shocks.
NUKIN FUTS i say. And i cant figure out the front forks. If you look between the forks you can see a spring on the inside. Looks like the sliders are just covers.

Found IT!!!!
http://www.flickr.com/photos/56884385@N02/5586190762/#sizes/o/in/photostream/

It is the craziest/tastiest concoction/fever dream I've seen in the last couple years. Makes that fellow trying to graft a 330 on his 750 seem sane.

Might just as well post the write up for the clicking impaired
"‘Son Of A Gun’ is based on a BSA Gold Star, although there’s little left of the original. The engine is a 1951 ZB-model single—which makes it 499cc, I’m assuming—and according to Larry, it’s an ex-racing engine."

The steel frame was handcrafted, forged and welded to give “a light, spindly look.” The swingarm is also steel and the suspension uses a combination of chains and springs. Lamb Engineering machined the forks from alloy and fitted 17” supermoto wheels attached to Talon hubs. “The design cues are taken from a mixture of 60s racing Hondas and fizzies [Yamaha FS1E],”

I'd love to have been a fly on the wall while it was coming together...

Flying J · « **Reply #6810 on:** April 08, 2011, 06:30:26 PM »

Grnrngr · « **Reply #6811 on:** April 08, 2011, 08:14:50 PM »

Love it!! Kind of a curious looking oil bottle tho...

Flying J · « **Reply #6812 on:** April 08, 2011, 11:03:24 PM »

http://www.youtube.com/watch?v=eVSIV_UsS2I&feature=player_embedded#at=170

Jt550 · « **Reply #6813 on:** April 09, 2011, 09:36:36 AM »

Quote from: ffjmoore on April 08, 2011, 06:30:26 PM

I CAN DIG THAT..... I'm not a HUGE fan of the struts, but atleast they took the style que from the front girder.... It's a little bit ZERO, little bit Dragster.... The Church of Choppers is a weekly read on my screen. (bottom right corner) And not to Leave out "Loud Fast Rules" & a decent site for land of the rising sun sickles, "Chop Cult"

But the purist won't dig a one of them.........

strynboen · « **Reply #6814 on:** April 09, 2011, 10:04:57 AM »

Might just as well post the write up for the clicking impaired
"‘Son Of A Gun’ is based on a BSA Gold Star, although there’s little left of the original. The engine is a 1951 ZB-model single—which makes it 499cc, I’m assuming—and according to Larry, it’s an ex-racing engine."

The steel frame was handcrafted, forged and welded to give “a light, spindly look.” The swingarm is also steel and the suspension uses a combination of chains and springs. Lamb Engineering machined the forks from alloy and fitted 17” supermoto wheels attached to Talon hubs. “The design cues are taken from a mixture of 60s racing Hondas and fizzies [Yamaha FS1E],”

I'd love to have been a fly on the wall while it was coming together...
hey hvere komms yamaha fs1 in story,,????is it tank lines..and old style seat

Tintop · « **Reply #6815 on:** April 09, 2011, 06:19:05 PM »

For the chopper crowd, found this at the bike show today. 72 750 done in 73 with supercharger & ARD mag.

Anti-Johnny · « **Reply #6816 on:** April 10, 2011, 08:30:43 PM »

This is, at least, two wheel related.

<a href="Not a valid vimeo URL">FROM STEEL: The Making of a Soulcraft[/url] from michael evans on Vimeo.</p>

Retro Rocket · « **Reply #6817 on:** April 10, 2011, 09:57:57 PM »

Excellent video. Wish i had all his tools.....

azuredesign · « **Reply #6818 on:** April 10, 2011, 10:08:22 PM »

+1 except I also wish I had the time, patience, and perhaps skill as well.

Jt550 · « **Reply #6819 on:** April 11, 2011, 05:43:46 AM »

Quote from: azuredesign on April 10, 2011, 10:08:22 PM

+1 except I also wish I had the time, patience, and perhaps skill as well.

+2 but I wish I even had .25 of his tools and .5 his space. My house is smaller then all
of that garage....

Gaucho · « **Reply #6820 on:** April 11, 2011, 06:16:00 AM »

Still working on it. But this picture hanging on my office serves the purpose of getting me motivated to come back home and hammer away every day.

Gaucho

Jt550 · « **Reply #6821 on:** April 11, 2011, 08:12:14 AM »

Quote from: Gaucho on April 11, 2011, 06:16:00 AM

Still working on it. But this picture hanging on my office serves the purpose of getting me motivated to come back home and hammer away every day.
Gaucho

Nice Trumpet.......
Is that a once of Photoshop I see there?

(Pm me if you need a new source for parts)

ev0lve · « **Reply #6822 on:** April 11, 2011, 08:18:02 AM »

You don't see that everyday...

Translated:
"The legendary Frankino, alias - Chopwork - usually uses his acting
customizer to create beautiful chopper old skool, but recently its
Motomorphosy hands was born, this beautiful especially on a Motoguzzi, not
out of place on the Bonneville Salt Flats ... if it were not for the engine almost
standard.
The 850cc classe'84 has in fact received only a performance exhaust, but
modified rigid frame and sovrastruttore built from scratch, make
this motorcycle very intriguing!"

Jt550 · « **Reply #6823 on:** April 11, 2011, 08:22:31 AM »

Jt550 · « **Reply #6824 on:** April 11, 2011, 08:24:42 AM »

Its Like a Brat Racer....

News:

Author Topic: "INSPIRATION GALLERY " (Read 2250219 times)