Author Topic: "INSPIRATION GALLERY " (Read 2265227 times)

Flying J · « **Reply #9325 on:** July 29, 2013, 04:55:55 PM »

No info on the BMW i could find. Came off an italian blog.

Ricky_Racer · « **Reply #9326 on:** July 29, 2013, 06:27:43 PM »

Nice 750, Mr. Moore. Any additional photos or a link? I didn't find it on your site. RR

Flying J · « **Reply #9327 on:** July 29, 2013, 06:41:05 PM »

No info. Look at the company who built it and found nothing.
http://rocket-garage.blogspot.in/2013/07/3.html
http://redmaxspeedshop.com/

Godffery · « **Reply #9328 on:** July 29, 2013, 11:36:33 PM »

The yellow parts are early Norotn production racer.

I built one in sliver years ago:
http://www.vinmoto.org/gallery/v/VinMoto-Garage/album03/Godfferys-Garage-123/album74/

Ricky_Racer · « **Reply #9329 on:** July 30, 2013, 09:40:26 AM »

I'm surprised that the Norton fairing and tail (along with the Lyta-style tank) work so well on the CB750. I think the upswept exhaust and round oil tank are perhaps the key. IMHO, nice lean look. RR

Bob3050 · « **Reply #9330 on:** July 31, 2013, 10:39:38 AM »

If I remember correctly the Norton accessories were made by Dunstall and they also had the same fairing and seat available to fit the Honda 750's at that time. That was in the mid 70's. Dunstall also had performance exhaust systems but I think they were only available for Nortons.
Bob

Godffery · « **Reply #9331 on:** July 31, 2013, 11:39:14 AM »

Dunstall made a kit similar but the original "Production Racer" was from the factory:
http://www.andover-norton.co.uk/NCProddyRacer.htm

Here is a Dunstall next to some factory Production Racers:

Blitzburgh207 · « **Reply #9332 on:** July 31, 2013, 11:40:12 AM »

Quote from: Flying J aka ffJMoore on July 29, 2013, 06:41:05 PM

No info. Look at the company who built it and found nothing.
http://rocket-garage.blogspot.in/2013/07/3.html
http://redmaxspeedshop.com/

Here are some pics from the build:
http://www.flickr.com/photos/redmaxspeedshop/sets/72157625464947445/
They're calling it the "Mad Max CB840"

snowman · « **Reply #9333 on:** July 31, 2013, 05:32:01 PM »

Here's my inspiration for my cafe build and I'm almost there. Just need to source an alloy Manx tank.

Dimitri13 · « **Reply #9334 on:** August 08, 2013, 12:13:34 AM »

Any info on it? Reverse searching returned nothing.

strynboen · « **Reply #9335 on:** August 08, 2013, 05:04:29 AM »

parelel/cross twin 2 stroke...vith rotary valve intake...

Tintop · « **Reply #9336 on:** August 08, 2013, 12:23:32 PM »

RG500 4 cylinder, rotary valve, two more carbs on the other side. You can just see the rear cylinder pipes up under the seat.

strynboen · « **Reply #9337 on:** August 08, 2013, 12:41:51 PM »

are it like a sqvare four..2 cranks kopled together??in 4 separeted champers in bottom

Flying J · « **Reply #9338 on:** August 08, 2013, 05:39:21 PM »

sinister902 · « **Reply #9339 on:** August 09, 2013, 07:23:46 AM »

those RG500's are SICK. A guy local has two of them and they're nutty. Super light and tons of power.

greenjeans · « **Reply #9340 on:** August 09, 2013, 01:18:07 PM »

Think I've seen the orange one around here, but not the brown one. I really dig the brown.

Retro Rocket · « **Reply #9341 on:** August 09, 2013, 02:01:55 PM »

Quote from: greenjeans on August 09, 2013, 01:18:07 PM

Think I've seen the orange one around here, but not the brown one. I really dig the brown.

They are both forum bikes....

Roach Carver · « **Reply #9342 on:** August 09, 2013, 02:07:12 PM »

Doctor D is the orange bike. who is the brown??

Retro Rocket · « **Reply #9343 on:** August 09, 2013, 02:18:26 PM »

Quote from: roach carver on August 09, 2013, 02:07:12 PM

Doctor D is the orange bike. who is the brown??

Can't remember but i saved pics of it from his build thread a couple of years back ....

Godffery · « **Reply #9344 on:** August 11, 2013, 06:10:54 AM »

Tews19 · « **Reply #9345 on:** August 11, 2013, 06:17:10 AM »

Quote from: Godffery on August 11, 2013, 06:10:54 AM

Oh god that looks beautiful!

SOHC4 Cafe Racer Fan · « **Reply #9346 on:** August 11, 2013, 07:01:42 AM »

Quote from: Godffery on August 11, 2013, 06:10:54 AM

Awesomeness

davidtime · « **Reply #9347 on:** August 11, 2013, 07:31:59 AM »

Thats where my motor went. Sure would look good in mine.

754 · « **Reply #9348 on:** August 11, 2013, 07:36:36 AM »

The motor looks great.. Except for the donkeydick hanging off the front. Is it really that hard to get the stocker off, plus you get to inspect the debris inside the stocker.

seanbarney41 · « **Reply #9349 on:** August 11, 2013, 07:38:52 AM »

what is that gold thing sticking out of the clutch cover?

News:

Author Topic: "INSPIRATION GALLERY " (Read 2265227 times)