Author Topic: "INSPIRATION GALLERY " (Read 2230816 times)

Ecosse · « **Reply #225 on:** September 29, 2008, 07:21:12 pm »

Is that a Factory Five car? I love Cobras. I 'll likely get sued by that 'auh shucks, I'm just a simple chicken farmer" for saying Cobra with out written consent from his lawyers.

(God bless ya Mr. Shelby)

Back to bikes, (although inspiration does come from many sources I believe) I am really stuck on the one-off frame bikes as well as the Seeley, Rickman, Martin creations.

Here's one I'd love to build should I get that winning lotto ticket, i.e. I'm a poor boy.

www.denoonsp.com

Ecosse · « **Reply #226 on:** September 29, 2008, 07:26:52 pm »

More.

Ecosse · « **Reply #227 on:** September 29, 2008, 07:35:44 pm »

Something a little different.

walkingchaos · « **Reply #228 on:** September 29, 2008, 07:40:36 pm »

Quote from: masonryman on September 29, 2008, 06:52:47 pm

sorry spiky i'll quite hijacking your thread with cars.

Here is one we finished about 2 years ago, we lost it off the trailer when delivering it

woa woa woa go back . . . you LOST it off the trailer? as in someone stole it . . . . or it fell off ?

masonryman · « **Reply #229 on:** September 29, 2008, 08:08:07 pm »

The strap around the rear end came loose, when breaking the car rolled forward breaking off the trailer jack and hitting the tow truck in the tail gate.

miner damage, we were only 1 mile from the shop, delivery was delayed 1 day but I think dad might have gained a few gray hairs that day.

masonryman · « **Reply #230 on:** September 29, 2008, 08:10:16 pm »

Quote from: Ecosse on September 29, 2008, 07:35:44 pm

Something a little different.

I like this one

rachet · « **Reply #231 on:** September 29, 2008, 08:13:48 pm »

Hey Ecosse, That's a crazy looking bike! Is the Top Center Tube the gas tank?

Rachet~

Ecosse · « **Reply #232 on:** September 29, 2008, 08:17:06 pm »

Quote from: rachet on September 29, 2008, 08:13:48 pm

Hey Ecosse, That's a crazy looking bike! Is the Top Center Tube the gas tank?

Rachet~

Only on the Egli bike. I posted a Harley a while back with a similar frame and gas went in the spine. Oil went under the seat.

Ecosse · « **Reply #233 on:** September 29, 2008, 08:18:36 pm »

Quote from: masonryman on September 29, 2008, 08:10:16 pm

Quote from: Ecosse on September 29, 2008, 07:35:44 pm
Something a little different.
I like this one

That Bimota is a work of art, no?

youngerthanmybike · « **Reply #234 on:** September 29, 2008, 09:09:50 pm »

Quote from: masonryman on September 29, 2008, 08:08:07 pm

The strap around the rear end came loose, when breaking the car rolled forward breaking off the trailer jack and hitting the tow truck in the tail gate.

miner damage, we were only 1 mile from the shop, delivery was delayed 1 day but I think dad might have gained a few gray hairs that day.

I can't imagine that! I think all of my hair would have fallen out, let alone turned gray! I don't know if you said it was or wasn't a Factory Five, but my buddy and his dad put one of those together. A sweet car to say the least. They only mildly massaged the 5.0 and it is a rocket. For the 25-30K it costs to build, you can't buy anything close to it. It's such a raw car- probably the only car that driving it, I felt as close to the road as on my bike. I gotta admit- I like the roar of the Shelby more than that of my 550-

masonryman · « **Reply #235 on:** September 30, 2008, 02:41:55 am »

it is a factory 5, with a fuel injected jack roush racing 355 small block ford

scunny · « **Reply #236 on:** October 14, 2008, 12:43:59 pm »

some more porn

Ecosse · « **Reply #237 on:** October 19, 2008, 06:38:24 pm »

For the 450 set. A nice alternative to a trad bobber look,no?

moham · « **Reply #238 on:** October 19, 2008, 06:48:23 pm »

Quote from: scunny on October 14, 2008, 12:43:59 pm

some more porn

The mags on that first ride are friggin dope.

jhasewhite · « **Reply #239 on:** October 19, 2008, 07:57:22 pm »

I'm thinking of making it a single seater by basically cutting the stock seat pan almost in half, welding up a plate to match the contour of the stock tail and re-upholstering Cafe'd using modified stock F tail... What do you think?

Ecosse · « **Reply #240 on:** October 19, 2008, 10:29:44 pm »

Sounds good! Don't forget to post in the 'projects' board! That stock seat looks like a black ants butt.

I like the idea of shortening it and retaining the tail. Dig the paint job.

bill440cars · « **Reply #241 on:** October 24, 2008, 08:42:06 pm »

Quote from: jhasewhite on October 19, 2008, 07:57:22 pm

I'm thinking of making it a single seater by basically cutting the stock seat pan almost in half, welding up a plate to match the contour of the stock tail and re-upholstering Cafe'd using modified stock F tail... What do you think?

Sounds good, can't wait to see it.