Author Topic: "INSPIRATION GALLERY " (Read 2231513 times)

Joksa · « **Reply #1125 on:** March 17, 2009, 04:10:03 am »

Quote from: rachet on March 13, 2009, 07:40:57 pm

Wait... YOU like SPINE framed bikes!?! Really!?!

Like..... CX500?

Ecosse · « **Reply #1126 on:** March 17, 2009, 07:32:49 am »

Now you've done it Joksa, I really don't need this kind of mental kindling.

I wonder how hard it would be to hang a SOHC from that rafter.

rachet · « **Reply #1127 on:** March 17, 2009, 07:50:12 am »

ROFL! i have a CX500 Frame and a spare 750 motor... HMMMMM.... Maybe I should break out the welder and some spare tubing...

Ecosse · « **Reply #1128 on:** March 17, 2009, 07:57:12 am »

Try mocking it up... and post pix!

I'm a bit of a masochist.

Ecosse · « **Reply #1129 on:** March 17, 2009, 08:05:19 am »

ahhhh, mec's monster.

rachet · « **Reply #1130 on:** March 17, 2009, 08:08:18 am »

Ok, but I need to make a Home Depot run First...

Let's see... I'll need some Duck tape, Gorilla glue, A box of #12 Machine Screws, some stir sticks... A whistle... A box of Matches, bailing wire, a slightly used weed wacker, and a rubber chicken!

Ecosse · « **Reply #1131 on:** March 17, 2009, 08:12:29 am »

Quote from: rachet on March 17, 2009, 08:08:18 am

Ok, but I need to make a Home Depot run First...

Let's see... I'll need some Duck tape, Gorilla glue, A box of #12 Machine Screws, some stir sticks... A whistle... A box of Matches, bailing wire, a slightly used weed wacker, and a rubber chicken!

... and a bottle of Old Harper!

(American Graffiti reference)

Krixxer · « **Reply #1132 on:** March 17, 2009, 05:53:55 pm »

Eat more Taco!

Retro Rocket · « **Reply #1133 on:** March 17, 2009, 06:30:59 pm »

CX500 cafe anyone?

Not too shabby for a shaft.

Mick

volkswagendan · « **Reply #1134 on:** March 17, 2009, 08:51:13 pm »

thats really cool.
now my gears are turning...

Retro Rocket · « **Reply #1135 on:** March 17, 2009, 09:19:04 pm »

It would be a pretty cheap build i would say..

Mick

mrbreeze · « **Reply #1136 on:** March 17, 2009, 10:38:07 pm »

Quote from: retro rocket on March 17, 2009, 06:30:59 pm

CX500 cafe anyone?

Not too shabby for a shaft.

Mick

That is baaaaad A$$$!!!!!!!!! The bike brings bad memories for me (thats what my little bro died on back in 85').He woulda dug the hell outa that one though.....

Retro Rocket · « **Reply #1137 on:** March 18, 2009, 06:33:23 am »

Quote

(thats what my little bro died on back in 85')

Sorry to hear about your bro MR B.
The ducktail on that one was made from a cb360T tank, very cool.

Mick

volkswagendan · « **Reply #1138 on:** March 18, 2009, 06:34:27 am »

yikes mr breeze. sorry to hear that.
such a sweet looking bike though. how are those things to work on?

Retro Rocket · « **Reply #1139 on:** March 18, 2009, 06:54:03 am »

Not to sure Dan, never worked on one, never really got into shaft driven bikes.

Mick

rachet · « **Reply #1140 on:** March 18, 2009, 06:55:39 am »

I've only played around on mine (I really do own a CX500, see the thread http://forums.sohc4.net/index.php?topic=48079.msg505686#msg505686 ) and it seemed pretty straight forward. It's water cooled, so that adds a little to the complexity, but not much. I purchased it from my neighbor who said it was a very smooth engine and nice to ride.

Industrial Rat400f Killer · « **Reply #1141 on:** March 18, 2009, 08:41:20 am »

Quote from: volkswagendan on March 18, 2009, 06:34:27 am

yikes mr breeze. sorry to hear that.
such a sweet looking bike though. how are those things to work on?

While looking around for one of these bikes for sale last night I found this http://www.elsham.pwp.blueyonder.co.uk/cx500/history/
If the guy is indeed as informed as it seems like he might be it sounds like parts are hard to find.

I found prices for them to be $500-1500.

Ecosse · « **Reply #1142 on:** March 18, 2009, 10:11:24 am »

don't know much about 'built ta go's' but i've seen some nice ones on this forum.

i'm told in spite of some particulars those cx/silverwings are stone reliable. personally, i think they look darn cool over all. that red cafe is quite cool

this one is from a french site i think.

Ecosse · « **Reply #1143 on:** March 18, 2009, 10:37:08 am »

speaking of cx's... and flat/dirt trackers

... this was honda's early factory effort with a cx mill turned side ways.

Flying J · « **Reply #1144 on:** March 18, 2009, 10:40:51 am »

Now that might be a good idea for a copper with a poor mans v twin look.

Ecosse · « **Reply #1145 on:** March 18, 2009, 11:30:49 am »

Yeah, I wonder how much of a PITA it would be to do.

OK, with bobber, tracker, v twin, Italian, ricocheting inside my noggin this seemed relevant.

Industrial Rat400f Killer · « **Reply #1146 on:** March 18, 2009, 11:33:48 am »

Awesome Duc!

Ecosse · « **Reply #1147 on:** March 18, 2009, 11:36:54 am »

I don't want to be accused of abandoning all loyalties.

Here's a cool work in progress on a French site, Fat Club.

edit: I believe the Fat Club is also the original source for the CX I posted and the SV earlier. Google Fat Club France.

HavocTurbo · « **Reply #1148 on:** March 18, 2009, 11:54:08 am »

Quote from: Ecosse on March 18, 2009, 11:30:49 am

Yeah, I wonder how much of a PITA it would be to do.

OK, with bobber, tracker, v twin, Italian, ricocheting inside my noggin this seemed relevant.

You supply it Bill.... I'll build it. Even if I don't like it.

Ecosse · « **Reply #1149 on:** March 18, 2009, 12:02:18 pm »

Quote from: HavocTurbo on March 18, 2009, 11:54:08 am

Quote from: Ecosse on March 18, 2009, 11:30:49 am
Yeah, I wonder how much of a PITA it would be to do.

OK, with bobber, tracker, v twin, Italian, ricocheting inside my noggin this seemed relevant.

You supply it Bill.... I'll build it. Even if I don't like it.

Hmmmm....

News:

Author Topic: "INSPIRATION GALLERY " (Read 2231513 times)

Krixxer