Author Topic: "INSPIRATION GALLERY " (Read 2251035 times)

Ogri · « **Reply #3200 on:** October 16, 2009, 10:28:55 AM »

Loosely assembled & currently being broken for spares on ebay UK, 810cc (Yoshi) engine in Norton Wideline Frame

Beans · « **Reply #3201 on:** October 16, 2009, 11:15:54 AM »

Quote from: Ogri on October 15, 2009, 03:46:35 PM

That last one reminded me of the 'Hulster' by Stellen Egeland

Now that's a nice bike. Wish I had the cash to build something to mash through the dirt. Lol

Ogri · « **Reply #3202 on:** October 16, 2009, 11:26:05 AM »

Quote from: Beans on October 16, 2009, 11:15:54 AM

Now that's a nice bike. Wish I had the cash to build something to mash through the dirt. Lol

I should point out that he made the entire top end of the engine himself. Cylinders, 'heads, pistons, rockers, pushrods etc. He also made the helmet he's wearing in the top pic from one piece of Aluminum.

Beans · « **Reply #3203 on:** October 16, 2009, 12:01:27 PM »

Quote from: Ogri on October 16, 2009, 11:26:05 AM

Quote from: Beans on October 16, 2009, 11:15:54 AM

Now that's a nice bike. Wish I had the cash to build something to mash through the dirt. Lol

I should point out that he made the entire top end of the engine himself. Cylinders, 'heads, pistons, rockers, pushrods etc. He also made the helmet he's wearing in the top pic from one piece of Aluminum.

That's dope. Nice looking helemt too. Once day ill build me a tracker hopefully after both my 550's are done but that will be years from now.

ProTeal55 · « **Reply #3204 on:** October 16, 2009, 12:10:48 PM »

Quote from: Beans on October 16, 2009, 11:15:54 AM

Wish I had the cash to build something to mash through the dirt. Lol

Do what my buddy did and build alittle badass bobber/tracker outta a SL350 -->

Has less than a grand into the entire build (inc. the purchase price of the bike)...

Beans · « **Reply #3205 on:** October 16, 2009, 05:56:13 PM »

Quote from: ProTeal55 on October 16, 2009, 12:10:48 PM

Quote from: Beans on October 16, 2009, 11:15:54 AM
Wish I had the cash to build something to mash through the dirt. Lol
Do what my buddy did and build alittle badass bobber/tracker outta a SL350 -->

Has less than a grand into the entire build (inc. the purchase price of the bike)...

thats not a bad Idea either. mmm Will have to search for another bike to store until I get time to work on it.

Retro Rocket · « **Reply #3206 on:** October 16, 2009, 06:02:16 PM »

Quote from: ProTeal55 on October 16, 2009, 12:10:48 PM

Quote from: Beans on October 16, 2009, 11:15:54 AM
Wish I had the cash to build something to mash through the dirt. Lol
Do what my buddy did and build alittle badass bobber/tracker outta a SL350 -->

Has less than a grand into the entire build (inc. the purchase price of the bike)...

Can you tell me what color that tank is please Pro Teal....and yes i know its orange...

Mick

MacM2010 · « **Reply #3207 on:** October 17, 2009, 09:53:44 AM »

Quote from: Ogri on October 16, 2009, 10:28:55 AM

Loosely assembled & currently being broken for spares on ebay UK, 810cc (Yoshi) engine in Norton Wideline Frame

Would that make it a Horton?

Ecosse · « **Reply #3208 on:** October 17, 2009, 11:01:45 AM »

Quote from: MacM2010 on October 17, 2009, 09:53:44 AM

Quote from: Ogri on October 16, 2009, 10:28:55 AM
Loosely assembled & currently being broken for spares on ebay UK, 810cc (Yoshi) engine in Norton Wideline Frame

Would that make it a Horton?

what a coincidence. i just stumbled upon this 450 and 750 "norda".

ProTeal55 · « **Reply #3209 on:** October 17, 2009, 11:25:26 AM »

Quote from: retro rocket on October 16, 2009, 06:02:16 PM

Can you tell me what color that tank is please Pro Teal....and yes i know its orange...

It's a custom mixed color with a TON of metalflake..

Ogri · « **Reply #3210 on:** October 17, 2009, 03:25:30 PM »

That's a serious front brake on that Norda (cooler name than Horton IMHO!) Grimeca ? Very nice curve on the header too.

Ricky_Racer · « **Reply #3211 on:** October 17, 2009, 04:20:29 PM »

250mm Menani front brake, isn't it?

That 450-500T looks great in the featherbed. Maybe it won't vibrate as much as the Triumph twin.

RR

MJL · « **Reply #3212 on:** October 18, 2009, 11:40:06 PM »

In the UK, this bike—nicknamed The #$%*—is something of a legend. Probably because it’s been around a long time and it looks good. And maybe because it also contains bits from nearly every iconic post-war British motorcycle maker. Steve ‘Swede’ Clark built his TriBSA in 1968, using a BSA frame and a hotted-up Triumph engine. Why? “I always argued that a BSA frame was better than a Norton frame, but no-one seemed to put a Triumph engine in one of those,” said Clark. “So that inspired me to make the TriBSA: a 750cc Triumph Thunderbird engine in a BSA frame instead of a Norton one. It’s a bit like a Triton but more interesting because it’s much more unusual.” The cylinder barrel is a Mk1 Morgo 750cc unit, mated to gas-flowed T140 heads and Amal GP carburetors. A lightened crank and BSA Gold Star RRT2 gearbox get the power down with minimum interference. The rear brake is (somewhat alarmingly) a stock BSA item, but the front is taken care of by a massive, rare and strong 260mm Fontana four-leading-shoe drum. The forks are Norton Roadholders and the oil tank is an equally original Gold Star item. Does the British ‘bitsa’ get any more classic than this?

Ogri · « **Reply #3213 on:** October 19, 2009, 02:48:23 AM »

Nice Tribsa! The front brake - the Fontana, looks like the one on the 'Norda' higher up the page; same meshed vents layout.

Beans · « **Reply #3214 on:** October 19, 2009, 06:57:03 AM »

Quote from: MJL on October 18, 2009, 11:40:06 PM

In the UK, this bike

Ogri · « **Reply #3215 on:** October 19, 2009, 07:53:43 AM »

Dresda. By Dave Degens.
Note postion of ignition coils and how the oil line goes into the frame. CMA wheels too!

nobody · « **Reply #3216 on:** October 19, 2009, 12:00:18 PM »

Quote from: Ogri on October 17, 2009, 03:25:30 PM

That's a serious front brake on that Norda (cooler name than Horton IMHO!) Grimeca ? Very nice curve on the header too.

I'm in love with that tank, so elegant yet so aggressive.

Ecosse · « **Reply #3217 on:** October 19, 2009, 12:19:16 PM »

benjies makes a tank a bit like that for our bikes. check 'em out if ya haven't already.

nobody · « **Reply #3218 on:** October 19, 2009, 02:56:00 PM »

I'm probably a minority on this one but I don't really find most of Benji's work very attractive at all. Also, they're extremely expensive.

Industrial Cafe · « **Reply #3219 on:** October 19, 2009, 03:17:26 PM »

boo
hiss

edit:

Ecosse · « **Reply #3220 on:** October 19, 2009, 03:43:06 PM »

Quote from: mgab on October 19, 2009, 02:56:00 PM

I'm probably a minority on this one but I don't really find most of Benji's work very attractive at all. Also, they're extremely expensive.

is that you carpy?

Alan F. · « **Reply #3221 on:** October 19, 2009, 04:36:10 PM »

Quote from: Ecosse on October 19, 2009, 12:19:16 PM

benjies makes a tank a bit like that for our bikes.

Quote from: mgab on October 19, 2009, 02:56:00 PM

I'm probably a minority on this one but I don't really find most of Benji's work very attractive at all. Also, they're extremely expensive.

Don't get me wrong I love his early bikes, but.....

I believe his fabrication days have gone the way of OCC, if you catch my drift.

Besides, don't some of his tanks seem derivative of the 78 CX500 design with it's great curve, knee dents and width?

Alan F. · « **Reply #3222 on:** October 19, 2009, 04:43:39 PM »

See any similarity?
I think a lengthened CX tank would look great on an early CB750.

Dave-and-his-550 · « **Reply #3223 on:** October 19, 2009, 04:58:11 PM »

I got my rear hub off my bike and thinking is there any sense in painting the center black? I've seen it on some bikes, I guess there would be no worries having to get in there and clean it. Grease and grim not being as visible...

Can anybody post pictures of bikes with this done?

von_Wanderlust · « **Reply #3224 on:** October 19, 2009, 05:37:31 PM »

Quote from: Alan F. on October 19, 2009, 04:43:39 PM

See any similarity?
I think a lengthened CX tank would look great on an early CB750.

Oh, wow. I might just have to keep an eye out for one and give it a go on my CB500. Thanks!

News:

Author Topic: "INSPIRATION GALLERY " (Read 2251035 times)