Author Topic: "INSPIRATION GALLERY " (Read 2250796 times)

754 · « **Reply #6350 on:** December 27, 2010, 10:41:01 AM »

Here goes, I missed a couple things when I posted that, was was partying with 1080& Turbochop last night.
I didnt notice it was knurled, and that the pivots are ?welded? We have ways of McGyvering around that.

The plates, for the most part, they are laid out (scribed), then drilled sawed and filed.. this is pretty straightforward.

The pegs and pedals, as I mentioned the now noticed knurl will be a problem. The grooves on the pegs could be done with a file while spinning it in a drillpress. You may be able to get some knurl on it using a vise, a couple of files and some shims, but its tricky. If a few members desired, I or another member could whip up some properly knurled econo-pegs.

The pivots, we cant really do the welding ourselves with basic tools, but you could pasten the pedal with a couple pf buttonheads or allen screws.. use round bars for the pivots. The major flaw of the pictired design, is not much pivot area, so It appears they would loosen up fairly fast...

If there is a bit of interest we could start a dedicated thread, and maybe supply a bit of a kit at reasonable cost..

Roach Carver · « **Reply #6351 on:** December 27, 2010, 11:03:55 AM »

754, I think a kit is a great idea. lots of guys here looking for rear sets.

ev0lve · « **Reply #6352 on:** December 27, 2010, 11:23:24 AM »

I was wondering on the welding side of things. These are attached to a BMW and there's no info but you can spy a reservoir above the brake side in other pics. On a 750 I suppose you'd have to ugly them up with a bracket to actuate the rear brake.

I have more than a bit of interest though

Edit: There it is

Retro Rocket · « **Reply #6353 on:** December 27, 2010, 03:50:53 PM »

Quote from: 754 on December 27, 2010, 10:41:01 AM

Here goes, I missed a couple things when I posted that, was was partying with 1080& Turbochop last night.
I didnt notice it was knurled, and that the pivots are ?welded? We have ways of McGyvering around that.

The plates, for the most part, they are laid out (scribed), then drilled sawed and filed.. this is pretty straightforward.

The pegs and pedals, as I mentioned the now noticed knurl will be a problem. The grooves on the pegs could be done with a file while spinning it in a drillpress. You may be able to get some knurl on it using a vise, a couple of files and some shims, but its tricky. If a few members desired, I or another member could whip up some properly knurled econo-pegs.

The pivots, we cant really do the welding ourselves with basic tools, but you could pasten the pedal with a couple pf buttonheads or allen screws.. use round bars for the pivots. The major flaw of the pictired design, is not much pivot area, so It appears they would loosen up fairly fast...

If there is a bit of interest we could start a dedicated thread, and maybe supply a bit of a kit at reasonable cost..

Frank, i thought for sure you would have a knirling tool for your lathe, it is a pretty easy process {as you would know} could maybe even borrow one.?

Mick

754 · « **Reply #6354 on:** December 27, 2010, 06:28:57 PM »

I have 4 knurling tools, 2 are triple header. I have a 1 shot tool, run it over and back.. done in seconds...

What I meant was the knurling & welding took it out of the, "able to do it with drillpress, hacksaw, files, & sander" project range..

motocyconomad · « **Reply #6355 on:** December 27, 2010, 06:48:49 PM »

in4line indian they should give that another shot, with a dash of triumph/ducati who even ownes the Indian name? who ever it is they suck. build great bikes here!
cool turbo chopper love that its cool...and oh is that the fastest cb750 ever?

kmoll70 · « **Reply #6356 on:** December 31, 2010, 02:46:05 PM »

wheres the oil tank?

754 · « **Reply #6357 on:** December 31, 2010, 09:40:36 PM »

On the chopper, it has a chrome tank.

The 402 has no oil tank

The roadracey 750 probably has one in stock location, (it only occupies the right 1/3 of the triangle..

SOHC Digger · « **Reply #6358 on:** January 01, 2011, 07:19:02 PM »

going4speed · « **Reply #6359 on:** January 01, 2011, 07:30:02 PM »

Man I do like that exhaust.

Quote from: SOHC Digger on January 01, 2011, 07:19:02 PM

crazypj · « **Reply #6360 on:** January 01, 2011, 08:04:06 PM »

Former girlfriend on one of my former bikes

Anti-Johnny · « **Reply #6361 on:** January 01, 2011, 08:42:23 PM »

http://jalopnik.com/5720534/how-two-sons-gave-their-father-a-christmas-hell-never-forget

aw

754 · « **Reply #6362 on:** January 01, 2011, 10:39:06 PM »

That blue 750 chopper looks like an Arlen Ness frame, if not its an SB&F

the technological J · « **Reply #6363 on:** January 02, 2011, 09:48:48 PM »

Quote from: Anti-Johnny on January 01, 2011, 08:42:23 PM

http://jalopnik.com/5720534/how-two-sons-gave-their-father-a-christmas-hell-never-forget

aw

wheres the part on the dad dumping it at th eend of the drive because he forgot how to ride it!

Anti-Johnny · « **Reply #6364 on:** January 03, 2011, 07:38:49 AM »

I was thinking the same thing.

apex_seeking · « **Reply #6365 on:** January 03, 2011, 08:11:36 AM »

I just hope my kids are that nice when I get old.

Alan F. · « **Reply #6366 on:** January 04, 2011, 06:45:57 AM »

From a motorcycle auction thread in the open forum, this is a 76...

What's that oil tank? Was that a Honda Racing part? or just the decal...

Ricky_Racer · « **Reply #6367 on:** January 04, 2011, 08:59:36 AM »

That's Kent Riches' bike, owner of Air-Tech. He mentioned last week that it had just been finished and was heading to Bonham's auction. Looks good. RR

754 · « **Reply #6368 on:** January 04, 2011, 09:10:04 AM »

Bonhams have serious flaws in their descriptions..
They describe that as hand bent exhaust and Mikuni racing carbs..

What I want to know; does it have race history ? or is it simply a tracker?
.................................................................................
To answer a pevious Question;
The oil tank looks full width of frame, that would hold enough oil, you can see the lines

Ricky_Racer · « **Reply #6369 on:** January 04, 2011, 09:19:53 AM »

Good questions, Frank; you'd have to ask Kent. That's not a slug-fest I'm about to get in the middle of. RR

Flying J · « **Reply #6370 on:** January 06, 2011, 10:32:18 PM »

The Moto Guzzi V8, or the Otto motorcycle was designed by Giulio Cesare Carcano specifically for the Moto Guzzi Grand Prix racing team for the 1955 to 1957 seasons. Though following the two-stroke Galbusera V8 of 1938, the Moto Guzzi Otto motorcycle and its engine represent a unique and historically significant engineering milestone. The Discovery Channel ranked the 'Guzzi Otto as one of the ten greatest motorbikes of all time.[2]

The DOHC V8 Grand Prix Motorcycle: 170 mph (270 km/h) in 1957

ev0lve · « **Reply #6371 on:** January 07, 2011, 08:45:28 AM »

Yep

"Honda LongBoard" - No other info

nobody · « **Reply #6372 on:** January 07, 2011, 09:48:47 AM »

I just had to wipe the drool from my chin. 750f or 900f?

CaféElite · « **Reply #6373 on:** January 07, 2011, 11:26:06 AM »

^
I really like that but not to hip on the length in the swing arm and the exhaust is a little to new age for me.. otherwise im hip to it..

RustyOlive · « **Reply #6374 on:** January 07, 2011, 11:40:36 AM »

Quote from: Iggy on January 07, 2011, 08:45:28 AM

Yep

"Honda LongBoard" - No other info

i really dig this bike.. ;-)

News:

Author Topic: "INSPIRATION GALLERY " (Read 2250796 times)