« previous next »
Pages: [1]   Go Down

Author Topic: Bolt size for petcock of '74 CB 200  (Read 1355 times)

0 Members and 1 Guest are viewing this topic.

Offline prince_ruben

  • Full Member
  • *
  • Posts: 44
Bolt size for petcock of '74 CB 200
« on: April 09, 2008, 01:37:18 PM »
Wonder if you gents can help me out in finding the correct size of the bolt for mounting the petcock to the tank of a 1974 Honda CB 200 t. I have a service manual yet it is vague.

R.
Logged

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: Bolt size for petcock of '74 CB 200
« Reply #1 on: April 09, 2008, 02:21:53 PM »
It's a regular ol' 6 x 1.0 x 40 screw.
I would replace it with an allen head, for the future.

bill
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline prince_ruben

  • Full Member
  • *
  • Posts: 44
Re: Bolt size for petcock of '74 CB 200
« Reply #2 on: April 09, 2008, 02:42:11 PM »
Quote from: tbpmusic on April 09, 2008, 02:21:53 PM
It's a regular ol' 6 x 1.0 x 40 screw.
I would replace it with an allen head, for the future.

bill
Thank you Sir. Off to the hardware store. Cheers!  ;D
Logged
Pages: [1]   Go Up
« previous next »