Author Topic: Unique Gas Tank!  (Read 1811 times)

0 Members and 1 Guest are viewing this topic.

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Unique Gas Tank!
« on: April 13, 2008, 12:57:37 PM »


         Check this unique gas tank out. ;)


                




         $162.50 with 11 minutes and 24 seconds left.

   http://cgi.ebay.com/ebaymotors/BSA-Firebird-650-Scrambler-Mark-IV-Gas-Tank_W0QQitemZ260227863128QQcmdZViewItem#ebayphotohosting
« Last Edit: April 13, 2008, 06:09:36 PM by bill440cars »
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Unique Gas Tank!
« Reply #1 on: April 13, 2008, 01:03:29 PM »
stock tank...
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Unique Gas Tank!
« Reply #2 on: April 13, 2008, 06:20:14 PM »
stock tank...


           Yeah.... For a BSA Firebird 650 Scrambler Mk IV. That wasn't the point. The point was that, I believe, it is a unique shaped gas tank all the same. And I liked the single bolt up through the tank mount that was used on this one and several others.

          And it sold for $215.27.
« Last Edit: April 13, 2008, 06:29:13 PM by bill440cars »
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline hahnda

  • lskdfhs;dljksa;
  • Hot Shot
  • ***
  • Posts: 409
Re: Unique Gas Tank!
« Reply #3 on: April 14, 2008, 11:34:37 AM »
Got one of those tanks on a "project" of mine.



Kevin
CB750K4 in pieces
CB750K3 with F trim
CB750K7
CB500 Cafe Project
CB750 Cafe

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Unique Gas Tank!
« Reply #4 on: April 14, 2008, 01:10:29 PM »
LOL google jelly mold tanks for a ducati bill
Stranger in a strange land

Offline merc2dogs

  • Hot Shot
  • ***
  • Posts: 625
Re: Unique Gas Tank!
« Reply #5 on: April 14, 2008, 08:02:56 PM »

 Looks like a fun project, a lot of potential there
 hope you do something to level the engine out! It just looks wrong leaning back like that.

Ken.

Offline hahnda

  • lskdfhs;dljksa;
  • Hot Shot
  • ***
  • Posts: 409
Re: Unique Gas Tank!
« Reply #6 on: April 14, 2008, 08:16:14 PM »

 Looks like a fun project, a lot of potential there
 hope you do something to level the engine out! It just looks wrong leaning back like that.

Ken.

Its not just the engine its the whole darn bike. Thats what happens when you slap on extended forks and don't rake the neck. I plan to ditch those extended forks and go back to something closer to stock length.
Kevin
CB750K4 in pieces
CB750K3 with F trim
CB750K7
CB500 Cafe Project
CB750 Cafe

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Unique Gas Tank!
« Reply #7 on: April 14, 2008, 09:12:36 PM »

 Looks like a fun project, a lot of potential there
 hope you do something to level the engine out! It just looks wrong leaning back like that.

Ken.

Its not just the engine its the whole darn bike. Thats what happens when you slap on extended forks and don't rake the neck. I plan to ditch those extended forks and go back to something closer to stock length.


Heh, how much ground clearance will you have left when you do that?  That bike looks fairly low already!  :)  I agree with merc2dogs, lots of potential in that bike.

mystic_1
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline merc2dogs

  • Hot Shot
  • ***
  • Posts: 625
Re: Unique Gas Tank!
« Reply #8 on: April 15, 2008, 07:13:51 AM »
That may be it, but looks like they made the rear axle sit too high in relation to the cradle.
  May have to shorten the lower / lengthen top tubes on the hardtail section to level it, then worry about the forks. Either one is fairly easy.

Ken.

Offline hahnda

  • lskdfhs;dljksa;
  • Hot Shot
  • ***
  • Posts: 409
Re: Unique Gas Tank!
« Reply #9 on: April 15, 2008, 07:56:23 AM »
Its all an illusion...........
Kevin
CB750K4 in pieces
CB750K3 with F trim
CB750K7
CB500 Cafe Project
CB750 Cafe

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Unique Gas Tank!
« Reply #10 on: April 15, 2008, 08:28:32 AM »
BeezaChopper.. ;D
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline hahnda

  • lskdfhs;dljksa;
  • Hot Shot
  • ***
  • Posts: 409
Re: Unique Gas Tank!
« Reply #11 on: April 15, 2008, 08:46:59 AM »
Yep BeezaChop "project". So many projects on the plate and so little time its pitiful. I have no focus. Some focus on one model. Some on one brand. Some on one country of origin. Me I just end up with all sorts of "stuff".

Short term focus is getting the riders back on the road. Spring might finally be here in northern WI so its time to get the batteries off the tenders and back in the bikes. Get them running and tuned and do some riding again. Then its on to finishing up my XS650 chopper. The frame is painted and the engine is rebuilt and in the frame. Girder front end installed and new tires are mounted. Need to start wiring and go through a set of carbs I dug out. This was a complete ground up build from whatever I had laying around in parts. The frame is a complete custom. After that or maybe while I'm working on that I need to get to work on my CB750K Cafe. Its complete for the most part, still needs paint and a tank lining. Then the russian sidecar bike needs some details worked out to get that on the road. Then there's the BSA M20, the CB77's, the '64 Jawa, a DT250, CB100, CL77's, Kawi MT1, CB500 hooligan bike, mods to my '70 Guzzi, refresh the CB750 K0 and K1, CA95 cafe project.............
Kevin
CB750K4 in pieces
CB750K3 with F trim
CB750K7
CB500 Cafe Project
CB750 Cafe