Author Topic: Exhaust/Header wrap experiences  (Read 2214 times)

0 Members and 1 Guest are viewing this topic.

Offline winnipeg550guy

  • Hot Shot
  • ***
  • Posts: 302
Exhaust/Header wrap experiences
« on: April 15, 2008, 03:10:58 PM »
I'm looking for some input regarding exhaust wrap whether any one has used it, It's good for covering up bad welds and I like the look but I'm concerned about possible heat retention with air cooled motors. I went for a little ride this afternoon for the first time with the headers wrapped and at one stop I noticed some smoke, could have been something in the wrap itself burning off dunno for sure I've never experienced this before installing the wrap.
 Anyone have any thoughts

 
74\' 550k., 1965 Suzuki K15, 1978 BMW R80/7

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Exhaust/Header wrap experiences
« Reply #1 on: April 15, 2008, 03:24:11 PM »
I'm looking for some input regarding exhaust wrap whether any one has used it, It's good for covering up bad welds and I like the look but I'm concerned about possible heat retention with air cooled motors. I went for a little ride this afternoon for the first time with the headers wrapped and at one stop I noticed some smoke, could have been something in the wrap itself burning off dunno for sure I've never experienced this before installing the wrap.
 Anyone have any thoughts

 


I have no personal experience with exhaust wrap, but my understanding is that the heat retention is a good thing - more heat is held within the pipes instead of being radiated through the pipes, as a result the exhaust gasses don't cool off and thereby become more dense and therefore slower as it exits the pipes.

When done right, it sure looks cool too :D

I imagine that like any other exhaust-related component, some light smoke when newly installed is probably normal.  Voluminous black smoke or open flames, however, may be indicators of some problems with the setup.  ;)

mystic_1
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline hymodyne

  • Expert
  • ****
  • Posts: 1,302
Re: Exhaust/Header wrap experiences
« Reply #2 on: April 15, 2008, 04:10:32 PM »
plenty of threads on this subject. I put it on the 4-2 setup in my avatar. Many different opinions as to the benefits or issues with heat retention in the pipes. I haven't decided if I am going to use it on the current version of the bike as it comes together...
hym
"All things are ready if our minds be so."

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Exhaust/Header wrap experiences
« Reply #3 on: April 15, 2008, 08:25:51 PM »
We used wrap just for the cool factor but there is a practical use for this stuff
It retains heat in the headers and that is good
just as mystic mentioned
Here is the bike that me and a friend put together for kicks
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

daniel son

  • Guest
Re: Exhaust/Header wrap experiences
« Reply #4 on: April 16, 2008, 11:02:54 AM »
i have this on my cb650 cafe, i had noticed quite abit of smoke when i started mine first of all!! but it went away afetr about 3-4 short rides.
i dont really know about heat retention, i just done it to look better than painted pipes.

whenever it rains it creates steam from the water evapourating and steams up your visor in the traffic though!

dan