Author Topic: Registry of 750 Owners (Read 163497 times)

saltcitycafe · « **Reply #500 on:** May 02, 2014, 09:22:28 AM »

Guess I should get in on this.

1971 cb750 k1
Purchased from a storage unit for $200, had been sitting for 15-20 years.

Here is a current in progress pic and an as purchased pic

Cabilao · « **Reply #501 on:** May 25, 2014, 02:36:43 AM »

CB750 P7,imported from Saudi Arabia to the Philippines,still under Restauration. Hope the Piston Rings and New Carb Boots arrive in the next days and i can finish it. Cross Country trip is already planned in August.
Current location is Cabilao Island,Philippines.

oldhatt45 · « **Reply #502 on:** June 16, 2014, 06:57:08 PM »

Hi Guys,
Just joined the forum about 2 weeks ago.
Which as it happens is when I started restoring my 1976 CB750 K6.
It's been sitting in my garages for the last 26 years. Long story.
I am the original owner since I bought it in 1976 and helped take it out of the shipping box.
Will post some pictures when she's ready to get back on the road.
Have read many of the posts on various topics here and am looking forward to the day.........
Charlie

Markcb750 · « **Reply #503 on:** June 18, 2014, 05:58:33 PM »

K6, The Best Year!

Welcome aboard.

evanphi · « **Reply #504 on:** July 10, 2014, 04:08:19 PM »

K5. "Rhonda"

LouieD · « **Reply #505 on:** July 27, 2014, 12:22:21 PM »

Hello all.

Been lurking on the site for a few weeks now and figured it was time to join. Got this 1976 750k a while back from a buddy of mine. My son wants a bike so I figured make a father/son project and have some fun while we're at it.

Here she is in all her glory... complete with custom eagle and flame paint job and chrome sissy bar! A few hours later we had her all stripped down and ready for the next step.

Looking forward to a speedy build so we can enjoy it soon.

Tews19 · « **Reply #506 on:** July 27, 2014, 02:58:02 PM »

Looks like a nice bike LouieD. What's the plans for the pipes?

LouieD · « **Reply #507 on:** July 28, 2014, 02:28:47 PM »

Quote from: Tews19 on July 27, 2014, 02:58:02 PM

Looks like a nice bike LouieD. What's the plans for the pipes?

Thanks. The exhaust is in really great shape, but my son wants something different/louder. I will probably hang onto them... I'm thinking about picking up another bike for a full restoration. We'll see.

knottedknickers · « **Reply #508 on:** August 06, 2014, 05:02:25 PM »

Quote from: Markcb750 on June 18, 2014, 05:58:33 PM

K6, The Best Year!

Curious... What, in your opinion, makes the '76 / K6 the best year? [I should say I've got a vested interest in your answer--my Dad just offered to give me his CB750, and I'm pretty sure it's a '76 / K6.]

Markcb750 · « **Reply #509 on:** August 06, 2014, 05:08:11 PM »

Because I own one...

Had all the improvements before change to longer wheelbase K7,

also had a few "negative improvement" such as lower HP due to leaner carburetor and cam characteristics.

knottedknickers · « **Reply #510 on:** October 04, 2014, 06:14:05 AM »

After that, I'd better introduce myself... And my bike:

My dad just gave me his 1976 CB750K (date of mfg: 12/75). He's owned it for the last 20 years, the last 6 of which have been in the corner of his garage... It's got 25,000 miles and is fairly clean. I'd like to keep it that way--clean, I mean; I fully intend to rack up the miles! I'd like to make a 'sport tourer' out of it (but without the hard case and fairing; see link in signature)--updated suspension front and rear, and some engine tune up. I'll tear it down / open it up this winter and see what I find. Hopefully nothing major, and I can have it back on the road next spring. I'm up in Canada, so spring comes a bit later than for many of you--gives me a bit more time to get it done. ;-)

Thanks for the great site. I've learned a lot here already!

7aliveatlast7 · « **Reply #511 on:** November 05, 2014, 02:36:10 PM »

Hey all, I'm Jeff from SEPA, I just joined the site about two weeks ago and figured I would introduce myself and my bikes. First is my rider, a 1975 cb750 k5 that I picked up in August after selling my previous project. It's got the side covers, just weren't on for this pic. I'd love to take this back to stock at some point with the original exhaust, bars, and such.

And then my project, which will not be returning to stock, a 1976 cb750 k6. First pic is how I bought her, second is where I got her to before its current state of being torn down to clean and powder coat stuff.

TheWoodenLung · « **Reply #512 on:** December 04, 2014, 12:52:34 PM »

Hey all.
New owner here...
I've taken the '76 CB750K off the hands of another member: heyjones who had a thread on his build in 2010/11 http://forums.sohc4.net/index.php?topic=64103.0

Here to document and bounce ideas off anyone who's interested.

The bike just had it's top end resealed as it was spewing oil and quite a mess.

I've already done a few fixes and mods that I can go over as soon as I get another thread going.

Looking forward to many hours a hermit in my garage!

DEL130Y · « **Reply #513 on:** December 14, 2014, 08:12:37 AM »

CB750F2
UK BIKE FIRST REGISTERED 31 JAN 1977.
I'VE JUST BOUGHT IT.
NEEDS TLC.

welshboy1963 · « **Reply #514 on:** May 08, 2015, 06:51:11 AM »

I haven't got many picture of my cb750, but she is sky blue, and runs sweet, she's not the fsstest thing ive ever ridden in my life at around 115 to 120 mph , but I have to say if honda ever reads this site please bring back the 750/4 its the best engine I've ever had, its so easy to work on too

firebane · « **Reply #515 on:** December 03, 2015, 10:28:02 AM »

1978 CB750K picked up last week. Never bothered to look at mileage but the few previous owners didn't show it much love. Couple of valve stems on the intake side are eaten up by rocker arms due to not having the tappet screw and nut in properly. I've cut the frame already to pull the valve cover as they didn't use a gasket and just put RTV on the stupid thing

Plans for the bike is to replace the tank with a earlier model as well as the seat. Change out the front forks to CB550 forks to lower the front a bit and then swap to 18" wheels.

Figured up here in Canada was a good little toy to tinker with through the winter and able to ride when its warmer.

knottedknickers · « **Reply #516 on:** December 03, 2015, 11:00:54 AM »

Welcome, fellow Canadian! Hope you have a nice warm place to work. ;-) Looking forward to hearing how your project goes.

Quote from: firebane on December 03, 2015, 10:28:02 AM

1978 CB750K picked up last week. Never bothered to look at mileage but the few previous owners didn't show it much love. Couple of valve stems on the intake side are eaten up by rocker arms due to not having the tappet screw and nut in properly. I've cut the frame already to pull the valve cover as they didn't use a gasket and just put RTV on the stupid thing

Plans for the bike is to replace the tank with a earlier model as well as the seat. Change out the front forks to CB550 forks to lower the front a bit and then swap to 18" wheels.

Figured up here in Canada was a good little toy to tinker with through the winter and able to ride when its warmer.

WhyNot2 · « **Reply #517 on:** December 03, 2015, 02:03:07 PM »

Welcome firebane, cool looking bike.

Exactly like the start of my first 750. Like with the 550 forks to lower. And 550 swing arm, longer and lowers the bike some. However, still in the garage leaning against the wall.

Lazy, just plain azz lazy.

mrbreeze · « **Reply #518 on:** December 03, 2015, 02:04:23 PM »

Firebane......I would be concerned with an engine that had silicone for a valve cover gasket. It doesn't take much to plug up an oil passage in the head and starve your top end of oil. Probably be a good idea to drop the oil pan for a look see.

firebane · « **Reply #519 on:** December 03, 2015, 02:24:53 PM »

Quote from: mrbreeze on December 03, 2015, 02:04:23 PM

Firebane......I would be concerned with an engine that had silicone for a valve cover gasket. It doesn't take much to plug up an oil passage in the head and starve your top end of oil. Probably be a good idea to drop the oil pan for a look see.

Oh yeah I'm going to be doing that too. This thing will be getting a full oil change before I start it again.

DickL · « **Reply #520 on:** February 16, 2016, 04:22:32 PM »

Hi,

This is Dick Listro and I just bought another 1970 Cb750K0. I bought one new in 1970 and now have bought another. I will be restoring it to 1970 appearance.

Picture attached

I livel in Souhwick, Mass

WhyNot2 · « **Reply #521 on:** February 17, 2016, 03:48:42 PM »

Quote from: DickL on February 16, 2016, 04:22:32 PM

Hi,

This is Dick Listro and I just bought another 1970 Cb750K0. I bought one new in 1970 and now have bought another. I will be restoring it to 1970 appearance.

Picture attached

I livel in Souhwick, Mass

Welcome aboard.......................

Ravie · « **Reply #522 on:** February 20, 2016, 09:16:34 AM »

Why not..

Ryan V. in Topeka, KS
1975 CB750K build date 10/74
Build thread in sig...

SoyBoySigh · « **Reply #523 on:** April 13, 2016, 12:50:14 AM »

I'm looking for the five-bolt dual-disc wire-spoke front hub. Just like in the above post by Calilao in the Philippines. This hub would be a critical improvement for my DOHC "CB900K0 Bol Bomber" project, so that I can keep the CB1100R vented 296mm rotors, or possibly even the CB1100RB dished one-piece 296mm rotors. I would pay through the NOSE for a hub like this, or trade for some of my Unobtainium parts if you like. 'Cause I'm sure there are ways to work around this problem and make stuff work with the 6-bolt front hubs, but the five-bolt rotors come in ALL available versions. Such as the CB750A five-bolt version of the regular SOHC CB750K front disc, 296mm - or the VF750F/VF1000F version with the Gold Boomerang rims, there was a slotted rotor with five-bolts, also 296mm. Plus GL1200 discs, vented with spiral grooves on the surface and the solid silver center-carrier otherwise similar to the GL1100A, CBX pro-link, CB1100R '82-'83 version of vented discs. Or the CB1100RB '81-only (only 1050 pairs of these rotors, plus spares, ever made! - but now available in replica form from Metalgear-AU!) TONS of different options. Meanwhile the SOHC-4/GL1000 front hubs with the 6-bolt pattern, & visually different but functionally identical '78 CB750K8 front hub - only offer the ONE type of 296mm rotors, being the original early-type CB750K0 single front disc. Fitted dual-disc on the CR750 only. And then several versions of 276mm such as GL1000, CB550 etc. Well, for the 276mm size the five-bolt hub offers several different forms. Plus 240mm discs from GL500 & certain CX500's. Plenty of options there.

So yeah - take a look at the above post by Cabilao and see what I mean:

Quote from: Cabilao on May 25, 2014, 02:36:43 AM

CB750 P7,imported from Saudi Arabia to the Philippines,still under Restauration. Hope the Piston Rings and New Carb Boots arrive in the next days and i can finish it. Cross Country trip is already planned in August.
Current location is Cabilao Island,Philippines.

scottly · « **Reply #524 on:** April 13, 2016, 08:56:14 PM »

Quote from: SoyBoySigh on April 13, 2016, 12:50:14 AM

I'm looking for the five-bolt dual-disc wire-spoke front hub.

Post this on the "Parts Wanted" board, instead of the 750 registry board.

News:

Author Topic: Registry of 750 Owners (Read 163497 times)

Markcb750

Markcb750