Topic: cb 360 help

[mk0094@hotmail.com]

ok, got a new head, and valve covers on. clearance is ok, cam shaft is a few degrees off, less than 3 degrees. is that bad? i have compression and spark, but no go. shaould i re-align hte camshaft, or is it "close enough"?

i am sick of all the work i have put into this bi***.  if anyone is interested in it, it is on ebay right now, and it comes with a spare engine.

let me know, just look up cb 360 on ebay.

thanks for any help if anyone has it....
mike

[Lumbee]

...you don't want timing "close enough"...it should be dead on.  I'd get the timing right...if still nothing, then start looking at carbs and spark...