Topic: PartsNmore Still need to connect these wires listed??

[jay72chevy]

These are still needed to be connected
From Honda Indicator
Male - Light blue /white stripe
         Brown     / white  stripe
         Light blue
         Brown    / blue stripe
         Brown   / Red stripe
         Grey wire

PartsNmore Harness
Female
         Brown
         Brown/Red stripe (with white sleeve)
         Brown/Red stripe (with white sleeve)
         White doubler     (with white sleeeve)
         White tripler
Noise Relay Box for turn signal
Female Brown/Blue stripe
Male    black wire

[bryanj]

Blue/white is running light
brown/white is front sidelight and clack lights
blue is blinker
brown blue ?
Brown/red?
grey feed from flasher can to switch OR horn (cant remember witch)

Brown should be lights from ign switch
white doubler should be high beam (i think)
Black is power
Rest dont know

[Jonesy]

Brown/red stripe is the fused power for the headlight. It starts from the key switch vicinity, goes through the fusebox and up to the headlight on/off switch.

Blue is Hi beam, white is Lo beam.

Gray is the flasher signal wire from the flasher relay. It goes up to the L/R switch.

[jay72chevy]

Hey thanks for the great replies. If it wasnt for out your guys superior knowledge, I wouldnt be able to figure any of this out. I will keep you posted on what i get connected. Thanks again.
              Jeremy