Topic: CB750 K6 Wheel Reassembly - Torque values?

[steve74]

I've stripped the forks, replaced the seal but my Haynes Manual doesn't have the correct torque (or any) for the pinch bolts at the bottom of the fork legs that hold the wheel on (4).


Anyone help? I've searched the tech library and site but to no avail.


Any help much appreciated!

Thanks

Steve

[steve74]

Found it - the 550 shares the same front fork and bolts (part numbers the same) so found it in that manual.


13-16 lb ft for anyone who needs it I believe....