Author Topic: pics of 4-into-1 headers - no MAC's please (Read 6296 times)

KB02 · « **on:** May 10, 2008, 11:15:33 AM »

Hi all. I am basically just looking for pictures of the headers for aftermarket 4 into 1 exhaust systems. I didn't ask for MAC's as they can easily bee seen in just about any picture of a bike with a MAC system on it (even from the wrong side...).

I have been thinking some about fabbing up my own exhaust system for my bike and was just wondering what other manufacturers had done. My bike is a 750 but the pictures don't have to be limited to that CC.

Thanks!!
-Bob

bwaller · « **Reply #1 on:** May 10, 2008, 01:36:06 PM »

Well sorry Bob I'm breaking the rules right off, because this was a Mac header, that is a GSXR muffler and the rest is part of my old stainless swimming pool ladder in between.

MRieck · « **Reply #2 on:** May 10, 2008, 01:40:07 PM »

Quote from: bwaller on May 10, 2008, 01:36:06 PM

Well sorry Bob I'm breaking the rules right off, because this was a Mac header, that is a GSXR muffler and the rest is part of my old stainless swimming pool ladder in between.

Nice exceptions are always welcome.

chrislib · « **Reply #3 on:** May 10, 2008, 02:16:10 PM »

Heres the crusty Kerker on my bike
http://picasaweb.google.com/dzlram93/Bike/photo#5177360049131640578

RRRToolSolutions · « **Reply #4 on:** May 10, 2008, 06:25:44 PM »

Kerker on a 1974 K4.

Regards,
Gordon

736cc · « **Reply #5 on:** May 10, 2008, 08:39:39 PM »

Jim F · « **Reply #6 on:** May 10, 2008, 08:44:21 PM »

This is a Jardine with a bend at the bottom to make more of a high pipe (kind of)
with a VH race can

fuzzybutt · « **Reply #7 on:** May 10, 2008, 08:49:41 PM »

Quote from: 736cc on May 10, 2008, 08:39:39 PM

that IS a yoshi pipe up top is it not?

Jim F · « **Reply #8 on:** May 10, 2008, 08:52:10 PM »

Why no its not but would gladly take it off your hands sir

yes it is and very desirable on this forem

super pasty white guy · « **Reply #9 on:** May 10, 2008, 09:34:22 PM »

Here's a pic of my BSM from david silver.

spwg

cb350twin · « **Reply #10 on:** May 10, 2008, 11:49:48 PM »

On a side note didn't Jardine just recently stop making pipes for the 750 it's no longer on there site ?

754 · « **Reply #11 on:** May 11, 2008, 07:45:38 AM »

If that is a Jardine on Big Jims yellow bike, then they make at least 1 more style & the collector is under the clutch cover.

I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Check the thread, 750,s from the Past.. by 1080, lots of header pics on there..

KB02 · « **Reply #12 on:** May 12, 2008, 05:00:40 AM »

Quote from: 754 on May 11, 2008, 07:45:38 AM

I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Yep, thats what I'm thinking of. I found a pipe bender in www.northerntool.com for $99.99 and thought that when all was said and done I could probably build a good header cheaper than what I can buy one for. I was just wondering how the different companies collected all the pipes into one.

I really love the exhaust set up on This Bike, but I have no idea how to "Make" a muffler. I can buy a slip on for a 4 into 1 just about anywhere that will work and look fairly good, though.

Quote from: bwaller on May 10, 2008, 01:36:06 PM

Well sorry Bob I'm breaking the rules right off, because this was a Mac header, that is a GSXR muffler and the rest is part of my old stainless swimming pool ladder in between.

Are you sure that's a MAC? It looks like it collects awfully far forward for a MAC.

And don't worry, a bike that looks nice should never have to apologize for it's appearance.

chrislib · « **Reply #13 on:** May 12, 2008, 05:21:33 AM »

I`m not a huge fan of 4/4`s but that set is outstanding.

Jim F · « **Reply #14 on:** May 12, 2008, 05:12:39 PM »

Quote from: 754 on May 11, 2008, 07:45:38 AM

If that is a Jardine on Big Jims yellow bike, then they make at least 1 more style & the collector is under the clutch cover.

I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Check the thread, 750,s from the Past.. by 1080, lots of header pics on there..

Yeah the collector is under the clutch.
I have had this system for about 15 years

Ricky_Racer · « **Reply #15 on:** May 12, 2008, 05:48:07 PM »

This is a Tri-Mil. They're now known for their VW Baja exhausts, but once upon a time they produced a limited number of these systems. RR

Terry in Australia · « **Reply #16 on:** May 12, 2008, 06:12:13 PM »

Here's a pic of some NOS pipes I bought at a swap meet last year, they're an unknown brand made in Japan. They work well with the 836 engine, not too loud, but definitely angry............

empiremica · « **Reply #17 on:** May 12, 2008, 06:37:00 PM »

Mug Ugly waitin' for her new seat. Graphite wrapped headers with Kerker can. Loud and fast.

mystic_1 · « **Reply #18 on:** May 12, 2008, 06:49:11 PM »

When I first got my bike it had this rusty Kerker 4-1 from the 70's installed...

... which has long since been called home by the Gods of Rust.

mystic_1

754 · « **Reply #19 on:** May 12, 2008, 07:40:33 PM »

UMM that last one is 100 % for sure, a Hooker Header, 1080 has a 4-2 set from them.

fuzzybutt · « **Reply #20 on:** May 12, 2008, 08:32:25 PM »

Quote from: KB02 on May 12, 2008, 05:00:40 AM

Quote from: 754 on May 11, 2008, 07:45:38 AM
I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Yep, thats what I'm thinking of. I found a pipe bender in www.northerntool.com for $99.99 and thought that when all was said and done I could probably build a good header cheaper than what I can buy one for. I was just wondering how the different companies collected all the pipes into one.

i have that same bender and it's damned near impossible to get a bend without crimping the pipe.

cben750f0 · « **Reply #21 on:** May 12, 2008, 11:06:07 PM »

here is a side pic of my tranzac system.

oh and my avatar has a frontal..

will post better pics when i get home

peace

mystic_1 · « **Reply #22 on:** May 13, 2008, 08:04:06 AM »

Quote from: 754 on May 12, 2008, 07:40:33 PM

UMM that last one is 100 % for sure, a Hooker Header, 1080 has a 4-2 set from them.

754, you mean the one I posted? You may be entirely correct but I thought I remembered the faded remnants of a Kerker sticker on there somewhere. That's not necessarily definitive though, anyone can slap on a sticker I guess.

mystic_1

paulages · « **Reply #23 on:** May 13, 2008, 11:41:42 AM »

i still think the stock 550F is one of the best out there:

kerker on a 550K:

unknown header on cb750:

750fchop · « **Reply #24 on:** May 13, 2008, 07:19:04 PM »

here's a sidewinder

http://good-times.webshots.com/photo/2490498060060737053NMLrId

News:

Author Topic: pics of 4-into-1 headers - no MAC's please (Read 6296 times)

fuzzybutt

empiremica

fuzzybutt