Topic: pics of 4-into-1 headers - no MAC's please

[KB02]

Hi all. I am basically just looking for pictures of the headers for aftermarket 4 into 1 exhaust systems. I didn't ask for MAC's as they can easily bee seen in just about any picture of a bike with a MAC system on it (even from the wrong side...).

I have been thinking some about fabbing up my own exhaust system for my bike and was just wondering what other manufacturers had done. My bike is a 750 but the pictures don't have to be limited to that CC.

Thanks!!
-Bob

[bwaller]

Well sorry Bob I'm breaking the rules right off, because this was a Mac header, that is a GSXR muffler and the rest is part of my old stainless swimming pool ladder in between.

[MRieck]

Well sorry Bob I'm breaking the rules right off, because this was a Mac header, that is a GSXR muffler and the rest is part of my old stainless swimming pool ladder in between.

Nice exceptions are always welcome.

[chrislib]

Heres the crusty Kerker on my bike
http://picasaweb.google.com/dzlram93/Bike/photo#5177360049131640578

[RRRToolSolutions]

Kerker on a 1974 K4.

Regards,
Gordon

[736cc]

[Jim F]

This is a Jardine with a bend at the bottom to make more of a high pipe (kind of)
with a VH race can

[fuzzybutt]

that IS a yoshi pipe up top is it not?

[Jim F]

Why no its not but would gladly take it off your hands sir

yes it is and very desirable on this forem

[super pasty white guy]

Here's a pic of my BSM from david silver.



spwg

[cb350twin]

On a side note didn't Jardine just recently stop making pipes for the 750 it's no longer on there site ?

[754]

If that is a Jardine on Big Jims yellow bike, then they make at least 1 more style & the collector is under the clutch cover.

 I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Check the thread, 750,s from the Past.. by 1080, lots of header pics on there..

[KB02]

I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Yep, thats what I'm thinking of. I found a pipe bender in www.northerntool.com for $99.99 and thought that when all was said and done I could probably build a good header cheaper than what I can buy one for. I was just wondering how the different companies collected all the pipes into one.

I really love the exhaust set up on This Bike, but I have no idea how to "Make" a muffler. I can buy a slip on for a 4 into 1 just about anywhere that will work and look fairly good, though.

Well sorry Bob I'm breaking the rules right off, because this was a Mac header, that is a GSXR muffler and the rest is part of my old stainless swimming pool ladder in between.

Are you sure that's a MAC? It looks like it collects awfully far forward for a MAC.

And don't worry, a bike that looks nice should never have to apologize for it's appearance.   

[chrislib]

I`m not a huge fan of 4/4`s but that set is outstanding.

[Jim F]

If that is a Jardine on Big Jims yellow bike, then they make at least 1 more style & the collector is under the clutch cover.

 I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Check the thread, 750,s from the Past.. by 1080, lots of header pics on there..

Yeah the collector is under the clutch.
I have had this system for about 15 years

[Ricky_Racer]

This is a Tri-Mil. They're now known for their VW Baja exhausts, but once upon a time they produced a limited number of these systems.  RR

[Terry in Australia]

Here's a pic of some NOS pipes I bought at a swap meet last year, they're an unknown brand made in Japan. They work well with the 836 engine, not too loud, but definitely angry............ 

[empiremica]

Mug Ugly waitin' for her new seat. Graphite wrapped headers with Kerker can. Loud and fast.

[mystic_1]

When I first got my bike it had this rusty Kerker 4-1 from the 70's installed...



... which has long since been called home by the Gods of Rust.


mystic_1

[754]

UMM that last one is 100 % for sure, a Hooker Header, 1080 has a 4-2 set from them.

[fuzzybutt]

I think the OP needs front shots or ones that show collector locations as they are thinking of making some pipes.

Yep, thats what I'm thinking of. I found a pipe bender in www.northerntool.com for $99.99 and thought that when all was said and done I could probably build a good header cheaper than what I can buy one for. I was just wondering how the different companies collected all the pipes into one.

i have that same bender and it's damned near impossible to get a bend without crimping the pipe.

[cben750f0]

here is a side pic of my tranzac system.

oh and my avatar has a frontal..


will post better pics when i get home

peace

[mystic_1]

UMM that last one is 100 % for sure, a Hooker Header, 1080 has a 4-2 set from them.

754, you mean the one I posted?  You may be entirely correct but I thought I remembered the faded remnants of a Kerker sticker on there somewhere.  That's not necessarily definitive though, anyone can slap on a sticker I guess.

mystic_1

[paulages]

i still think the stock 550F is one of the best out there:



kerker on a 550K:


unknown header on cb750:

[750fchop]

here's a sidewinder


http://good-times.webshots.com/photo/2490498060060737053NMLrId