Author Topic: Preferred aftermarket exhaust systems for the CB750 (Read 20232 times)

gregwaits · « **on:** May 11, 2008, 12:00:22 PM »

What are the most popular brands of replacement exhaust systems for the CB750? The stock pipes on my '78 are okay, but they are showing their age, and I want to eventually upgrade.

I have read mixed opinions on Mac systems. Budget wise, I'd like to get set up for less than $300 -$350. (am I dreaming?)

Then comes the electronic iginition!

greasy j · « **Reply #1 on:** May 11, 2008, 12:37:26 PM »

I bought a set of Mac 4 into 1's. mostly because I got a really good deal. there isn't much else out there as far as new.

as far as the Mac pipes go. I like the way they look, but there are some flaws. the head pipes don't sit flush to the engine. it's weird but you can still see half of the screw because you can only screw them in so far. I thought I had them on wrong but I guess that's how they're supposed to go. looks kinda half assed. there is already a bubble in the chrome that flaked off. and the paint was already chipped in a few places out of the box. so they have a #$%*ty paint and chrome job but they seem to work well. I think I'm going to try and find something else, eventually. most likely used. hope that helps ya a little.

shoemanII · « **Reply #2 on:** May 11, 2008, 12:47:23 PM »

i think the macs are a good option: got a used set and they fit well, are light, have a removeable baffle and are easily modified: i took out the baffle, shortened the end can 4inches by cutting a slash-cut and shortened the baffle too. sounds fine w/baffle and really fine open. i paint 'em yearly 'cause the rust is coming back. will get another set someday when these are toast. think you can get a new set for about $276 from chaparral or jc whitney or somebody. i forget.

bobp

greasy j · « **Reply #3 on:** May 11, 2008, 07:08:08 PM »

I didn't mean to say they suck cuz it kinda sounds that way. they're actually really great as far as sound and feel, they seem solid and whatnot. it's easy to get the baffles out if you want, too. it's just a crappy paint job. which is no biggie if you don't mind a few touch ups. and that weird screw thing. for the price I paid they're pretty good, actually.

wannabridin · « **Reply #4 on:** May 11, 2008, 07:29:59 PM »

jemco man. hand formed, matches the original yoshi hand bents. but i think for your price range, they're a bit too much. about 450 shipped from houston. about a week or two lead time. do a google search for jemco exhaust to see some pictures of his work. super high quality and amazing performance. let us know what you end up getting, no pics = no exhaust!!!

KB02 · « **Reply #5 on:** May 12, 2008, 05:09:26 AM »

There are probably more MAC systems on older bikes than any other system for two reason: #1.) MAC makes the pipes; #2.) They're cheap.

Reason #1 you really can't argue with too much. A lot of companies just won't make a pipe for a 30+ year old bike. I personally don't care for MACs. I would buy a Kerker for twice the price any day, but I'd be getting three times the pipe, so it kind of works out.

cbr-eric · « **Reply #6 on:** December 29, 2008, 02:21:21 PM »

which macs are you guys using?

Retro Rocket · « **Reply #7 on:** December 29, 2008, 02:47:41 PM »

Is there a link for Jemco.??

Mick

MRieck · « **Reply #8 on:** December 29, 2008, 03:19:00 PM »

Quote from: retro rocket on December 29, 2008, 02:47:41 PM

Is there a link for Jemco.??

Mick

http://www.jemcoexhaust.com/

Retro Rocket · « **Reply #9 on:** December 29, 2008, 03:22:16 PM »

Thanks mate...

.

Mick

blacknblue_cafe · « **Reply #10 on:** December 29, 2008, 03:25:29 PM »

both Carpy and cyclexchange are running some new products:
www.cb750cafe.com
www.cyclexchange.net

I have no idea about the quality or the performance though???

cbr-eric · « **Reply #11 on:** December 29, 2008, 03:30:53 PM »

the jemco website doesn't show anything for the 750??? is that right?

MRieck · « **Reply #12 on:** December 29, 2008, 04:31:22 PM »

Quote from: cbr-eric on December 29, 2008, 03:30:53 PM

the jemco website doesn't show anything for the 750??? is that right?

Correct.

pablo78cb550 · « **Reply #13 on:** December 29, 2008, 07:42:12 PM »

Quote from: blacknblue_cafe on December 29, 2008, 03:25:29 PM

both Carpy and cyclexchange are running some new products:
www.cb750cafe.com
www.cyclexchange.net

I have no idea about the quality or the performance though???

i've seen lots of pics of Yoshi pipes.
but what is Carpy selling....

seaweb11 · « **Reply #14 on:** December 29, 2008, 09:24:11 PM »

More "Yoshi" photos on a 750 can be seen in this thread. http://forums.sohc4.net/index.php?topic=17831.435
Not an inexpensive option, but the fit is great, and quality looks good. .......

........that and I expect flames to come out of it!!!!!!!!

GammaFlat · « **Reply #15 on:** December 29, 2008, 10:10:03 PM »

I put chrome MAC 4-1s on my K6 about 10 years ago (about 300 back then) and have been happy with them although I've not put a lot of miles on them. I have discolored them near the head but am otherwise pretty happy. I'm about to move them to my K8 to make room for my new HM341s. My K7 is a good candidate for the Cyclexchange 4-2-1 pipes

.

ev0lution7 · « **Reply #16 on:** December 31, 2008, 10:43:49 PM »

I got a KerKer 4-1 Header from Cycle X you might call him and see if he has another used one and then make your own muffler i just happened to find a muffler without the header at a local shop for $50 and got the header from Cycle X $75

void909 · « **Reply #17 on:** January 01, 2009, 04:27:16 AM »

I think I have a kerker laying around but its got a few dents. I figured it would effect the tuning so I havent fitted them yet. got the setup for free and didnt realize what I had.

fuzzybutt · « **Reply #18 on:** January 01, 2009, 12:54:24 PM »

the exhaust carpy is selling is apparently hand bent by the guy that did the yosh pipes back in the 70's.

Flying J · « **Reply #19 on:** January 01, 2009, 05:08:22 PM »

if he could hand bend them with the one continuous curve i would buy them but those look more like the mac headers then the yoshs i like.

Retro Rocket · « **Reply #20 on:** January 01, 2009, 05:13:52 PM »

The Yoshi's i have seen come with 2 different bends......the nice rounded bent ones and the more normal ones.....I think Terry has the later....i prefer the rounded ones.

Mick

bgfootball67 · « **Reply #21 on:** January 01, 2009, 06:47:17 PM »

How about the X-Pipe from our West Coast Doctor?

coyotecowboy · « **Reply #22 on:** January 01, 2009, 07:26:20 PM »

Hey BG, how do you like that x-pipe? I was thinking about fabbing something like that up with my stock headpipes, but couldn't decide what diameter to use at the X. Then I bought a 4-1 and it fell by the wayside. Does it have a more even sound?

seaweb11 · « **Reply #23 on:** January 01, 2009, 08:09:05 PM »

Quote from: coyotecowboy on January 01, 2009, 07:26:20 PM

Hey BG, how do you like that x-pipe? I was thinking about fabbing something like that up with my stock headpipes, but couldn't decide what diameter to use at the X. Then I bought a 4-1 and it fell by the wayside. Does it have a more even sound?

I think a lot of people would like more "ass stats" on the X pipe

bgfootball67 · « **Reply #24 on:** January 02, 2009, 01:41:49 PM »

I like the X-pipe, for the sheer fact that no one out here in the midwest (that I have seen) is running one. It does have a very unique note, check out my build thread for video (once it warms up I will post better video).

Dr. Campbell (X-Pipe) sent me the wrong damn pipe (DOHC instead of the SOHC), I waited for almost a year and a half with pipes sitting in my garage before trying to fit the exhaust to the bike so I just hacked it up and made it fit to my tastes. The pipe is cheaply made (super thin pipes) but I like the balanced look and fitment now.

If I had it do over again, I would have done a before and after with stock and aftermarket pipes to see the performance differences. I had a ton of engine work done, so can't really tell is the pipe makes that big of a difference or it was the engine work. I love the pipes seaweb11 got from Yamiya in black of course for my bike, and am/was waiting for a set of hand bent pipes from 736cc even sent Andy a set of exhaust flanges? It was the look and the oddity factor that influenced me with the X-Pipe, along with the horsepower increase claims.....

ev0lution7 · « **Reply #25 on:** January 02, 2009, 10:20:55 PM »

i like my Kerker that i got here is the pics it has minor dents on the bottom but othing that would effect tunning the primary pipes are deffinetly larger inside that stock and it souldns WAY better

Flying J · « **Reply #26 on:** January 03, 2009, 08:43:24 AM »

dont drink and type. I think i inderstand most of that.

fuzzybutt · « **Reply #27 on:** January 03, 2009, 09:32:35 AM »

i'm not really happy with the pipes offered for the sohc 750, either they dont look right, hang too low or are way too damn expensive, or in the case of the x-pipe which is pretty reasonable as compared the the 599 dollar yoshi pipe carpy is selling, is made with tubing that is wayyyyyyyy too thin to last for any length of time on a street ridden, daily rider. SO i am going to live with the kerker i have now, and eventually this winter i'm going to try my hand at fabricating my own yoshi type exhaust. hooker even has these little inserts that align the pipes from the inside.

diggz_82 · « **Reply #28 on:** January 03, 2009, 06:35:11 PM »

Benjie makes some cool looking pipes. I like the symmetry of pipes on both sides of the bike. But the price is much more out of your range.
Does anyone have any experience with these pipes?
http://www.benjiescaferacer.com/exhaust.html

I just wish that he would put one more bend in them to make them run parallel to the ground just under the rear hub.

Steve F · « **Reply #29 on:** January 03, 2009, 06:54:23 PM »

Quote from: ffjmoore on January 03, 2009, 08:43:24 AM

dont drink and type. I think i inderstand most of that.

He's from "Grass Valley" Wadda you expect?

News:

Author Topic: Preferred aftermarket exhaust systems for the CB750 (Read 20232 times)

ev0lution7

fuzzybutt

ev0lution7

fuzzybutt

diggz_82