Topic: Turn signals stop functioning, buzzer buzzes continiously, WTF ?

[cb750k7]

Hi all,

Yesterday after a ride, I have noticed that all  turn signal stopped blinking and the buzzer gives a continuous tone when the switch is engaged either left or right.


Any quick remedy or just the old "follow the wires" route?

TNX all.

Jona

[Klark Kent]

swap out the realy before you go chasing wires.  get an electronic flasher relay.

[cb750k7]

swap out the realy before you go chasing wires.  get an electronic flasher relay.

TNX Klark,
Is this unit a universal car unit or a special HONDA motorcycle unit?

Jona

[Klark Kent]

one size fits all, your local auto parts store is the way to go.

[cb750k7]

Hi all,

I am a bit puzzled.  According the wiring diagram,  the flasher unit has 3 prongs.

I have checked my unit and it has only 2 prongs.

Checked all the bulbs,  seems that all filaments are well. 
The rear left socket had some corrosion,  cleaned it but still got the continuous buzz without blinking.

The flasher gets 12V while the switch is turned on to either L or R.

Does it narrows it to the flasher unit?  And 2 or 3 prongs?


Tnx all

Jona

[Klark Kent]

the third terminal is unneccessary.  if they are labeled P, L and X- P is for pilot and can be left alone. 

[cb750k7]

Indeed they are marked X and L.

TNX KK

[seanxnj]

So did you ever figure out what happed with it cause mine is doing the same exact thing, and i don't wnana buy a new flasher relay if i don't have to

[silentone]

So did you ever figure out what happed with it cause mine is doing the same exact thing, and i don't wnana buy a new flasher relay if i don't have to

A new flasher is only around $5 (sometimes less).

[andy750]

So did you ever figure out what happed with it cause mine is doing the same exact thing, and i don't wnana buy a new flasher relay if i don't have to

Stock flasher units are thermal flashers whereas newer ones (for around $5) are electronic so no need for it to warm up or depend on the RPMs of the bike! Easy!