Topic: source for NOS exhaust valves CB 500K1

[hymodyne]

I'm in need of a set exhaust valves for my 500K1 project bike. is there anywhere I can get these beside DSS or CMSL?

Hym

[seebee750]

I also need valves for my 1978 CB750 F3 410 head.
 I have an NOS head and would like to build it up as a model for display or just for my collection, to look at.
I have the springs,washers, valve seals and just need the valves and keepers. From Honda they are an $$$ arm and a $$$ leg. I need those items, so is there a source for reasonable priced Honda valves? I tried eBay but had to bid against a millionaire again. I can't keep up.

[bryanj]

For the 500 try www.westernhillshonda.net BUT you will find it cheaper to go to DSS

For the 750F3  best of luck as i dont think even Honda have them any more

[MRieck]

I also need valves for my 1978 CB750 F3 410 head.
 I have an NOS head and would like to build it up as a model for display or just for my collection, to look at.
I have the springs,washers, valve seals and just need the valves and keepers. From Honda they are an $$$ arm and a $$$ leg. I need those items, so is there a source for reasonable priced Honda valves? I tried eBay but had to bid against a millionaire again. I can't keep up.

  Dynoman has new stainless valves for the F3 that are reasonably priced. I've got lots of keepers for those style valves.

[seebee750]

http://www.dynoman.net/bikepages/sohc/index.html

What a great site.
thanks

[fastbroshi]

   So what alternatives are there for a 550?  All I see on dynoman's page is 750 stuff.  Anything else I see anywhere is stock Honda stuff, which I don't have a problem with, but hey, even those Kibblewhites for a 750 are cheaper than stuff from Honda.