« previous next »
Pages: [1]   Go Down

Author Topic: #1 carb choo choo  (Read 995 times)

0 Members and 2 Guests are viewing this topic.

Offline donny

  • Hot Shot
  • ***
  • Posts: 305
#1 carb choo choo
« on: May 29, 2008, 01:25:45 PM »
what is causing the carb to "choo' out the air side?   missed spark?
Logged
2007 Husqvarna self propelled lawn mower    1976F    1971K    1974K      1990 FXRS-SP

Offline donny

  • Hot Shot
  • ***
  • Posts: 305
Re: #1 carb choo choo
« Reply #1 on: May 29, 2008, 01:43:48 PM »
okay...it is more of a "chit"..........."chit"  sound ?
Logged
2007 Husqvarna self propelled lawn mower    1976F    1971K    1974K      1990 FXRS-SP

Offline 750K2

  • new rider with an old bike
  • Enthusiast
  • **
  • Posts: 240
Re: #1 carb choo choo
« Reply #2 on: May 29, 2008, 01:49:20 PM »
the intake valve might be hanging open.  have you checked your valve rocker clearances lately?
Logged

Offline donny

  • Hot Shot
  • ***
  • Posts: 305
Re: #1 carb choo choo
« Reply #3 on: May 29, 2008, 04:20:13 PM »
damn good call ;D   , I only checked the one valve, it was off, regapped it and the noise was gone. . .  I set the valves last summer, but I guess..whatever.
now there is a little tick, but tomorrow I will re set them all.
Logged
2007 Husqvarna self propelled lawn mower    1976F    1971K    1974K      1990 FXRS-SP

Offline 750K2

  • new rider with an old bike
  • Enthusiast
  • **
  • Posts: 240
Re: #1 carb choo choo
« Reply #4 on: May 30, 2008, 07:51:17 AM »
there's a guy on here named hondaman who recommends adding 0.001" to both the gaps of the intake and exhaust clearances for the purpose of longevity.  they do make a bit more noise but apparently the added gap means the valve stems last longer.  he knows his stuff.   i found that thread after i set my gaps this spring but will do it next time around.  good luck!
frank
Logged
Pages: [1]   Go Up
« previous next »