Author Topic: CB750K1 COUNTERSHAFT BEARING REMOVAL (6304) (Read 3469 times)

unlord5150 · « **on:** June 07, 2008, 11:15:53 AM »

I have to remove the 6304 bearing from the countershaft bearing holder on the outside of the case. Does anyone have suggestions on how to accomplish this?

mystic_1 · « **Reply #1 on:** June 07, 2008, 06:00:28 PM »

I got one out by freezing the assembly, the bearing popped right out then.

mystic_1

754 · « **Reply #2 on:** June 08, 2008, 08:14:10 AM »

If it the one with the groove and clip , you will be pulling the motor and splitting the cases..

mystic_1 · « **Reply #3 on:** June 08, 2008, 08:31:52 AM »

Nah, the 6304 bearing on a 750K1 is the one that rides in the countershaft bearing support under the mission cover.

Bearing sits onside #1 in the following pic, no need to split the cases.

mystic_1

unlord5150 · « **Reply #4 on:** June 08, 2008, 09:20:39 AM »

Yup, that's the one. I've got it in the freezer right now, hopefully that will do the trick.

754 · « **Reply #5 on:** June 08, 2008, 09:35:06 AM »

Oh that one..heat it to 250, and it should fall out.

SOHC/4 Owners Club Forums

News: