Author Topic: Does any one give a Crap about my shop / garage build?  (Read 48715 times)

0 Members and 2 Guests are viewing this topic.

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: Does any one give a Crap about my shop / garage build?
« Reply #100 on: August 01, 2008, 11:15:28 AM »
it's gonna be a loft

gotta have some place for the gimp.   ;D 8) ;D
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Does any one give a Crap about my shop / garage build?
« Reply #101 on: August 01, 2008, 11:17:25 AM »
 ;D ;D ;D

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Does any one give a Crap about my shop / garage build?
« Reply #102 on: August 01, 2008, 12:17:34 PM »
lotsa pages so far, so i may have missed it...

is that the back side of the house?

looks great, interesting rafter construction... was it to save some dough or to save some space for overhead storage?

I call it the back of the house, even though it is the road side. We are water front so I call this the front........
I assure you nothing about this roof line was to save $$. Just handed a carpenter another $800.00 and it is very slow going.

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Does any one give a Crap about my shop / garage build?
« Reply #103 on: August 01, 2008, 01:48:30 PM »
nice spiral staircase you got there ,

thats what do all day , make railings and stairs for industrial settings (high rises,factories, parks. etc. )

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: Does any one give a Crap about my shop / garage build?
« Reply #104 on: August 01, 2008, 01:57:35 PM »
nice spiral staircase you got there ,

thats what do all day , make railings and stairs for industrial settings (high rises,factories, parks. etc. )

Hmm, then how come your Nick is isn't SparkyBike?

 ;D ;D ;D
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Does any one give a Crap about my shop / garage build?
« Reply #105 on: August 01, 2008, 08:30:20 PM »
Here's as far as it went this week :P






fuzzybutt

  • Guest
Re: Does any one give a Crap about my shop / garage build?
« Reply #106 on: August 02, 2008, 02:42:26 PM »
not sure if this was mentioned earlier or not, and it's easier to just ask  ::) , how many square feet are you going to have total? . i'm building a small shop building for myself this fall/winter as the 8x10 workspace i have is ridiculous with a 33 gal compressor, 4 toolboxes and bike lift and welder. i'm doing a 12x20 with a 10 foot ceiling out back.

martino1972

  • Guest
Re: Does any one give a Crap about my shop / garage build?
« Reply #107 on: August 02, 2008, 02:46:01 PM »
i got a 28x28x10 shop,and  i make a living out of it,cars,truck,quads,bikes,etc..
but its getting to small,so now we are going to buid a 40x60x20,as soon as i got enough cash to do it..

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Does any one give a Crap about my shop / garage build?
« Reply #108 on: August 02, 2008, 03:45:26 PM »
It's 24 x 24 c/w 12x12 ft loft.  Other ceilings 20 ft or so.

fuzzybutt

  • Guest
Re: Does any one give a Crap about my shop / garage build?
« Reply #109 on: August 02, 2008, 06:58:40 PM »
It's 24 x 24 c/w 12x12 ft loft.  Other ceilings 20 ft or so.

nice, great size

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Does any one give a Crap about my shop / garage build?
« Reply #110 on: August 02, 2008, 10:16:35 PM »

Hmm, then how come your Nick is isn't SparkyBike?

 ;D ;D ;D

   just for you buddy  ;)
[youtube=425,350]<object width="425" height="344"><param name="movie" value=" name="allowFullScreen" value="true"></param><embed src=" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>
[/youtube]


 

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Does any one give a Crap about my shop / garage build?
« Reply #111 on: August 04, 2008, 09:44:46 PM »
Any one have any recommendations regarding propane heaters for garages?

martino1972

  • Guest
Re: Does any one give a Crap about my shop / garage build?
« Reply #112 on: August 04, 2008, 09:47:37 PM »
if in bc the winters get as cold and long as in alberta,i would say:woodstove..
do you have natural gas to your place??then one of those infra red heaters would work nice..
on propane i'm not sure,i asume you mean propane bottle heater...

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Does any one give a Crap about my shop / garage build?
« Reply #113 on: August 04, 2008, 10:53:28 PM »
i have one of those  big torpedo heaters that runs on either diesel or kerosene.

works like a champ for my purposes , but i think .. you've already delved this far into the mancave endever , you should go all out and pipe natural gas to it (if you have that ability, codes and all) and get one of those industrial jobs that hangs in the ceiling

if not they make torpedo heats big enough for that space   

Offline my78k

  • I am Meat-O of the Hungry Horses MC
  • Old Timer
  • ******
  • Posts: 2,839
Re: Does any one give a Crap about my shop / garage build?
« Reply #114 on: August 05, 2008, 06:21:24 AM »
I would recommend keeping an eye out for a used Oil furnace. I see them all the time in my area as people are moving away from oil and converting  to natural gas. Most times it is the tanks that are in rough shape and the furnace themselves are fine. I have seen a few go fo for free (just come and pick it up since they don't want to pay for disposal). The only cost is getting a hundred gallon tank and even some of them you will see for free too...as long as they didn.t have to get cut to get them out of the house.

Dennis

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: Does any one give a Crap about my shop / garage build?
« Reply #115 on: August 05, 2008, 07:11:17 AM »
Any one have any recommendations regarding propane heaters for garages?
you live a bit south of texas, right?  not too cold down there i would assume but since you're near the water it might be a bit nippier on occasion, i would think.

i have one like this dual burner model...
http://www.masterheaters.com/lptt/tt30.html

if i had insulation in the garage it would do wonders... instead, i just work next to it.   ;D  puts out some serious heat if you want it too.  each burner has 3 settings and you could simply run only one burner if thats all you needed.  the portability is a bonus.  got mine for 80 bucks last winter at home depot. 
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline mkramer1121

  • Expert
  • ****
  • Posts: 1,304
Re: Does any one give a Crap about my shop / garage build?
« Reply #116 on: August 05, 2008, 10:18:18 AM »
Any one have any recommendations regarding propane heaters for garages?

my recommendation?  wood burning stove....

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Does any one give a Crap about my shop / garage build?
« Reply #117 on: August 05, 2008, 03:20:14 PM »
1st I'm on the West Coast of Canada.

I had considered a wood stove, but just want to turn a switch when I'm in there.
I have been looking at this type of heater.



http://cgi.ebay.com/REDDY-30KBTU-PROPANE-GARAGE-WALL-HEATER-VENT-FREE-TSTAT_W0QQitemZ380050251639QQcmdZViewItem?hash=item380050251639&_trkparms=72%3A552%7C39%3A1%7C66%3A2%7C65%3A12&_trksid=p3286.c0.m14.l1318

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: Does any one give a Crap about my shop / garage build?
« Reply #118 on: August 05, 2008, 03:25:16 PM »
re those vent free heaters, don't they give out a lot of water vapour. I know the ones here in NZed (lpg burning) do
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

martino1972

  • Guest
Re: Does any one give a Crap about my shop / garage build?
« Reply #119 on: August 05, 2008, 04:35:06 PM »
how long would that heater do with lets say a propane bottle from a bbq???

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Does any one give a Crap about my shop / garage build?
« Reply #120 on: August 05, 2008, 04:55:20 PM »
Apparently quite a while, and I would have a larger tank installed outside to feed a couple of them.

No natural gas or oil on the Island ;D  Not enough power left in my feeder from the house for elect :P

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: Does any one give a Crap about my shop / garage build?
« Reply #121 on: August 05, 2008, 06:25:58 PM »
Well Derek,If you don't want to burn wood and have no access to natural gas....looks like propane is the way to go. I was around those torpedo lookin' units in Wyoming a few years back. They warm a shop up real good but they go through the propane pretty quick. I wouldn't recommend the used oil heater because you have to have alot of straight motor oil in it (no mix with other discarded fluids). They have to be cleaned out a couple of times a year and they are a messy bee-atch to clean. If it were me, I would put a wood stove in AND run propane heaters. Unless you have laws up there that won't allow both??
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Does any one give a Crap about my shop / garage build?
« Reply #122 on: August 05, 2008, 07:16:39 PM »
A buddy of mine has one of those WOOSH torpedo heaters as well, and I know what you mean by "they go through the fuel quick".

The walls on the garage are 2 x 6 the roof rafters are 2 x 12s so with that much insulation I hope the propane units will do the trick pretty quick without a lot of vapors.  Could also put in 1 base board heater in by the work bench to keep the snap of cold out.

Can always refit a wood stove up later as well.  ;D

Thanks for your comments guys.

Offline DarkRider

  • Nomad.or Drifter...Def not a
  • Old Timer
  • ******
  • Posts: 2,611
  • Lone Wolf.....Among the herd of sport bikers...
Re: Does any one give a Crap about my shop / garage build?
« Reply #123 on: August 06, 2008, 08:42:40 AM »
I agree with the dual heater idea. That way if you run out of propane or wood...you can still keep goin with the other heater!
'84 Chevy C10
'73 MGB Roadster
'69 Ford F250

Currently a rider without a bike

Quote from: heffay
so, you say just tie myself on with this... and steer w/ this?   ;D ;D  ok.  where's my goggles?   8)

Offline mark

  • finds nothing amusing about being an
  • Old Timer
  • ******
  • Posts: 2,939
  • we're out here and this is where we are.
Re: Does any one give a Crap about my shop / garage build?
« Reply #124 on: August 06, 2008, 09:13:16 AM »
I have one of those kerosene flamethrower jobs - it takes the chill off while the wood stove gets going.  :)
1976 CB550K, 1973 CB350G, 1964 C100

F you mark...... F you.