Topic: CB750 Complete Engine Gasket Kit

[Rocky2010]

Hi Guys, just wanted to ask what Engine Gasket kits are preferred for the CB750
I was looking a couple of different brands should I get the NE Brand Complete gasket kit from 4 into 1 or the CB750K GASKET SET from Yamiya?
Not used these brands before so I was just wondering if others have used and recommend one of the these Gasket Kits or should I go for another brand.

[Nic]

NE brand is OK, the NE pucks are nice and thick, some Orings are not in the kit but that's par for the course.
Yamiya pucks are the thinnest and i would not use them "again"
They  do sell Honda ones though but don't use the Yamiya pucks FFS.

[disco]

Hi Rocky,
I've used Vesrah, Cruizin Image & Yamiya gasket sets. I like the Yamiya gaskets. IMHO they were far better quality than the other two. Not the cheapest option, but I felt they were worth it. Didn't use the Yamiya pucks so can't comment on them.

[flybox1]

I used a Vesrah kit, and treated most gaskets with thin layers of copper spray.  No leaks.
I did however need to purchase several 'sets' of pucks to find adequate ones.
The Vesrah kits pucks were not thick enough compared to their recess depth the head.

[Dracon]

I've go to a new unopened NE Brand gasket kit from 4into1 - $40 shipped

[Nic]

The Vesrah kits pucks were not thick enough compared to their recess depth the head.

I agree, the Vesrah pucks are not good either, I use NE brand.

[HondaMan]

Most of the kits made before 2014 had too-thin rubber pucks. I recently bought some Vesrah (my general favorites) kits, and they once again have pucks, and they are correct. For a few years (2010-2014) Vesrah had left them out of the kits, because they had been selling the wrong ones (too thin) between 2008-2010, causing LOTS of troubles for us.

[markreimer]

Ive used cycle x kits a couple times. Great product.


Sent from my iPhone using Tapatalk

[Rocky2010]

Thanks everyone for your information helps me out big time