Topic: Master Cylinder help CB360

[SSCR]

I would like to replace the old master and brake lines on my twin. What could I use? Something like this maybe with a custom line?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=001&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=110263117518&rd=1
I saw on Z1 some items that I could build a custom line out of and I'm rewiring the whole bike already so I think I could figure out the brake light switch. Thanks-Don

[crazypj]

That isnt a CR as advertised, its a normal street one.
 Easy to extend wiring from original location or, as your building new harness just put wires up to switch.
 I made a brake line this afternoon for my 360
PJ

[SSCR]

Will it still work or is it to much for the CB360? Anyon know if the stock one is 14mm or smaller?

[crazypj]

Stock bore is 14mm, just measured tool I made to hold master cyl by bore for machining outside
PJ

[SSCR]

Great thanks PJ! By the way love your bike, mine is the same color, I'm going to be junking all the body stuff so if you need something let me know, although it's in pretty crappy shape and the seat is a 2 up Corbin. So I think I might just go with that ebay master since it's 14 mm and make a custom line like PJs.