« previous next »
Pages: [1]   Go Down

Author Topic: Baking Hi-Temp parts  (Read 4328 times)

0 Members and 1 Guest are viewing this topic.

Offline rbmgf7

  • 2>4
  • Expert
  • ****
  • Posts: 881
Baking Hi-Temp parts
« on: July 16, 2008, 07:38:12 AM »
Is the wife mad at you because the house smells like Hi-temp paint when you go to bake parts in the oven? Well, do it on the grill instead! I just finished baking a set of exhaust pipes on the grill with both burners on the lowest setting where my thermometer says it's an even 400F. I layed down a sheet of aluminum foil on the grill so the heat would distribute.

I'm using the Duplicolor brand which requires either 300 for 2 hours or 400 for 1.5 hours. VHT was too demanding on the bake cycles but I'm sure would've been a better brand.
Logged

Offline inline4

  • Enthusiast
  • **
  • Posts: 174
Re: Baking Hi-Temp parts
« Reply #1 on: July 16, 2008, 06:31:41 PM »
BRILLIANT!!!!!!!
Logged
America Needs To Get Its Balls Back!

Offline rklystron

  • I have not failed. I've just found 10,000 ways that won't work. Thomas A. Edison
  • Hot Shot
  • ***
  • Posts: 257
Re: Baking Hi-Temp parts
« Reply #2 on: January 14, 2009, 12:04:17 PM »
Good Idea, I am going to bake in the oven. She will be leaving for 2 days on Friday. I am in the process of prepping parts and when she drives out of the driveway the parts are in the oven. I hope the smell is gone when she comes back, or I will be living in my garage. Almost do that now.
Logged
1970 CB750 K0 (Bought in 73)
1972 XL250 (Bought new in 72)
1973 ST90 (Free)
1975 XL250 (Free)
1975 Rickman CR750
1982 CBX1000 Pro-link
1975 CB750 DRAG BIKE
1977 Custom Built CB750 Sturgis Bike (GL front end).
1977 CB750 F2 (Big Resto)
1977 CB750A (Auction Buy)
1978 CB750 K8 (My San Francisco ride)
1984 VFR750 (Bought New)

haloskycrash

  • Guest
Re: Baking Hi-Temp parts
« Reply #3 on: March 07, 2009, 08:21:20 PM »
Cool idea...you have to both laugh really hard about this though.  You are treating it like you are gonna throw a high school kegger...only it's a bike parts baking party.
Logged

Offline manjisann

  • Hazardous Chemical Inhalation
  • Master
  • *****
  • Posts: 1,828
Re: Baking Hi-Temp parts
« Reply #4 on: March 08, 2009, 02:10:44 PM »
Did you also have the pipes on them too, or just the muffler?  My grill is too small to do it with pipes and mufflers together.

Brandon
Logged
Sure it's for sale! How much you ask?? Well, how much are you willing to pay??? Now triple it, that's the price!

1973 CB500 K2 - Sold the bike and bought a Mig, Miss the bike, Love the Mig :D
1980 CB650 Custom
1971 CB500 Frame 650 engine: Project

Trip and General Ramblings blog: manjisann.blogspot.com

Offline Toxic

  • Expert
  • ****
  • Posts: 1,200
Re: Baking Hi-Temp parts
« Reply #5 on: March 12, 2009, 12:57:51 PM »
Quote from: manjisann on March 08, 2009, 02:10:44 PM
Did you also have the pipes on them too, or just the muffler?  My grill is too small to do it with pipes and mufflers together.

Brandon

That was my thought as well, how big is your grill?
Logged

Offline Dan in SE WI

  • Full Member
  • *
  • Posts: 7
Re: Baking Hi-Temp parts
« Reply #6 on: March 12, 2009, 01:07:32 PM »
<You are treating it like you are gonna throw a high school kegger...only it's a bike parts baking party.>

And I thought I was being naughty when I waited for wife to leave on trip to Fla. before boiling deer head (animal no longer needed it) in family spaghetti pot on kitchen stove.  II needn't have bothered to be so sneaky.  After she got back, she used same pot to boil (with bleach) the hundreds of sea shells she brought back.  Kitchen smelled like a laundry room for a week.
Logged

Offline luder

  • Hot Shot
  • ***
  • Posts: 406
Re: Baking Hi-Temp parts
« Reply #7 on: March 12, 2009, 01:11:49 PM »
I like that Dan-Boiling the deer head in the pasta pot-buy the way how did it turn out(only in WI) I mean the mount not the meal....luder
Logged
Pages: [1]   Go Up
« previous next »