Topic: Fork leg diameter cb350

[usedtoluvavdub]

Ok,

The first after market purchase for my project is clip on bars. I've been doing some reading and discovered 2 common sizes for fork diameters. I have a 73 CB350. I was sure it was a 35mm until I came across a really nice set of clip ons that said 33mm for a cb350 twin...Were the twins different?

Call me lazy, I was hoping from a straight answer from you guys (the pros!) so I only had to take mine apart and remove the cover one time....to put the darn things on!

Thanks for helping the newbie!

[dusterdude]

i take it you dont have a set of calipers.

[SSCR]

I think they are like my Cb 360s which is 33mm. Ohio Cafe racers has a info page on the diameter of all early honda fork legs, check there.

[usedtoluvavdub]

i take it you dont have a set of calipers.

haha...I work for Wurth...I have more sets calipers than any man should. I just was hoping to only take everything apart once as my 350 still has the body match covers on the legs which require removal of the top plate, bars...etc just to get to the legs and get that measurement.

Anyone with an early 70s cb350 have exposed legs or clip ons? Please take a quick measurement for me.

Thanks!

[usedtoluvavdub]

I think they are like my Cb 360s which is 33mm. Ohio Cafe racers has a info page on the diameter of all early honda fork legs, check there.

go figure...of all the info in that section on Ohio cafe racers page...there is no cb350! SERIOUSLY! There are 360s, cl350s...cb450s...no cb350..I even did a docsearch on it. No results!

[ohiocaferacer]

33mm

[usedtoluvavdub]

33mm

Great! Thanks so much!!