« previous next »
Pages: [1]   Go Down

Author Topic: cb550k exhaust question  (Read 1219 times)

0 Members and 1 Guest are viewing this topic.

Offline NickC

  • Hot Shot
  • ***
  • Posts: 703
cb550k exhaust question
« on: August 08, 2008, 07:43:48 PM »
Alright, been trying to get this bike road worthy. Trying to get it running just right today, and after some time and tinkering, my head was hurting from the exhaust.  Took the tailpipe off to have a look. Is the small piece the baffle, or does a baffle screw to the end of it? The end of it is threaded. Any other tip available than this megaphone looking one?
Thanks!
Nick


Logged

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: cb550k exhaust question
« Reply #1 on: August 08, 2008, 07:45:53 PM »
Are you talking about the "trumpet" shaped early pipes (pre '77), or the megaphone-type found on the '77-'78 550 K's?
Logged
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen

Offline Triffecpa

  • Hot Shot
  • ***
  • Posts: 477
Re: cb550k exhaust question
« Reply #2 on: August 08, 2008, 08:11:42 PM »
I don't quite understand your question.  The pipes on the bike in your pics are not stock pipes.  Are your pipes too loud or do they leak (both of which would cause your head to hurt)?

TR

Logged

Offline NickC

  • Hot Shot
  • ***
  • Posts: 703
Re: cb550k exhaust question
« Reply #3 on: August 09, 2008, 05:57:52 AM »
The pipes are too loud. I was wondering if the small piece in the picture was the exhaust baffle, or if i needed to find a replacement.
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,880
  • CB500 Number 1000036
Re: cb550k exhaust question
« Reply #4 on: August 09, 2008, 08:50:42 AM »
Who knows as the pipes are an unknown make anything might be going on
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline WFO

  • Will work for powerbands
  • Expert
  • ****
  • Posts: 920
Re: cb550k exhaust question
« Reply #5 on: August 09, 2008, 10:44:55 AM »
See if you can find some stamping on it to find the maker.
Logged
82 cb650 sc nighthawk - 78 kz 650 b

Offline NickC

  • Hot Shot
  • ***
  • Posts: 703
Re: cb550k exhaust question
« Reply #6 on: August 09, 2008, 02:56:42 PM »
Can't find any markings. After further inspection, it is missing another piece. Towards the end of the pipe, facing the wheel, is a small hole, most likely for a screw.
Now I just have to find out what exhaust it is..... :-X
Logged

Offline Hush

  • Finally they realise that I am an
  • Really Old Timer ...
  • *******
  • Posts: 6,761
  • "Lady, I've heard it all before"!
Re: cb550k exhaust question
« Reply #7 on: August 09, 2008, 03:41:51 PM »
What the heck is he running there, can't tell if it's a 4 into 1 or a two into 1???
First look I thought he had twisted a set of CB650 pipes across the front of the head but looks like the inner rusty one joins the chrome one just under the motor.
Logged
I think the thing I most like about motorcycling is the speed at which my brain must process information at to avoid the numb skulls who are eating pies, playing the ukulele, applying make-up etc in the comfort of their airconditioned armchairs as they make random attempts to kill me!!!!!!!

Offline NickC

  • Hot Shot
  • ***
  • Posts: 703
Re: cb550k exhaust question
« Reply #8 on: August 09, 2008, 03:48:10 PM »
4 into 2
1 and 4 joined, and 2-3
Logged

Offline hymodyne

  • Expert
  • ****
  • Posts: 1,302
Re: cb550k exhaust question
« Reply #9 on: August 09, 2008, 04:36:37 PM »
someone jammed a lawnmower silencer in the pipe. the threaded portion screws into the cylinder head on a briggs and stratton or Tecumseh engine.

hym
Logged
"All things are ready if our minds be so."

Offline WFO

  • Will work for powerbands
  • Expert
  • ****
  • Posts: 920
Re: cb550k exhaust question
« Reply #10 on: August 09, 2008, 04:46:53 PM »
Quote from: hymodyne on August 09, 2008, 04:36:37 PM
someone jammed a lawnmower silencer in the pipe. the threaded portion screws into the cylinder head on a briggs and stratton or Tecumseh engine.

hym


No doubt a top secret acme speed mod from wylie coyote suuuuuper genius.
« Last Edit: August 09, 2008, 04:49:03 PM by WFO »
Logged
82 cb650 sc nighthawk - 78 kz 650 b

Offline NickC

  • Hot Shot
  • ***
  • Posts: 703
Re: cb550k exhaust question
« Reply #11 on: August 09, 2008, 09:31:47 PM »
Hahah another shady item found on my $300 bike!!
So, now that I know that, anyone recommend universal silencers that might work?
Logged
Pages: [1]   Go Up
« previous next »