« previous next »
Pages: [1] 2 3   Go Down

Author Topic: Will JB Weld work?  (Read 5433 times)

0 Members and 1 Guest are viewing this topic.

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Will JB Weld work?
« on: September 02, 2008, 10:26:41 AM »
 Anytime I get a wide open straight road with no traffic or intersections I've been whining the Sumbich up for some speed runs. No problems for 19,023 miles, but on this particular stretch of road outside of Williams,CA something kicked up and knocked a small hole in my case. I'm thinking a bit of JB Weld oughta do the trick but figured I would ask here first. Whaddya think?
























 :D :D :D :D :D :D :D
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline ColinMc

  • Expert
  • ****
  • Posts: 1,006
  • There aint no pickle like a super pickle...
Re: Will JB Weld work?
« Reply #1 on: September 02, 2008, 10:44:47 AM »
Duct tape and a piece of gutter tin should have you back on the road in no time...don't bother with that JB Weld crap.
Logged
1976 CB750K - Cafe Project...taking forever
1984 Honda MB-5 - MB-8 conversion in process
2001 Ducati 748 - Built 996 motor sleeper

cdwicks

  • Guest
Re: Will JB Weld work?
« Reply #2 on: September 02, 2008, 10:49:45 AM »
I agree with the previous reply.  JB is great on some things, but not things that deal with fossil feuls.  I wouldn't bother with it.  I have tried to use it on carbs and the gas eats it right up.  Just my opinion....

cdwicks
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: Will JB Weld work?
« Reply #3 on: September 02, 2008, 11:08:14 AM »
I've heard of total loss ignition systems but total loss oil systems are a brave new frontier Sean
Logged
Owner of the "Million Dollar CB"

Offline WFO

  • Will work for powerbands
  • Expert
  • ****
  • Posts: 920
Re: Will JB Weld work?
« Reply #4 on: September 02, 2008, 11:12:46 AM »
heck ya it works i had a 93 beta synt they had plastic gas tanks anyways it mounted on the back by screws and had lossened up and wore a hole into the tank so i gobbered up the intire area sanded it back into shape and redrilled the hole ( good as new) and it isn't effected by gas and i was using 105 racing fuel mixed 70 to 1 but i don't know about that application seems the bonding would be in question you would really have to prep the area good.
« Last Edit: September 02, 2008, 11:16:45 AM by WFO »
Logged
82 cb650 sc nighthawk - 78 kz 650 b

Offline ColinMc

  • Expert
  • ****
  • Posts: 1,006
  • There aint no pickle like a super pickle...
Re: Will JB Weld work?
« Reply #5 on: September 02, 2008, 11:18:41 AM »
I think he was going for a cheap way to get that ducati dry clutch noise...

EDIT: I was actually joking before...ive' used JB weld on stuff before with good results as far as a cob job goes...crank cases, fuel tanks...Seal All seems to work better on gas stuff though.
« Last Edit: September 02, 2008, 11:26:51 AM by ColinMc »
Logged
1976 CB750K - Cafe Project...taking forever
1984 Honda MB-5 - MB-8 conversion in process
2001 Ducati 748 - Built 996 motor sleeper

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: Will JB Weld work?
« Reply #6 on: September 02, 2008, 11:39:51 AM »
Quote from: MRieck on September 02, 2008, 11:08:14 AM
I've heard of total loss ignition systems but total loss oil systems are a brave new frontier Sean

   When that stuff hit my collector the plume was visible from space :D
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline Sporkfly

  • The frosty rider
  • Hot Shot
  • ***
  • Posts: 727
  • Mmm, Guinness
Re: Will JB Weld work?
« Reply #7 on: September 02, 2008, 11:40:15 AM »
Why you have your rod just hanging out there?  :-\
Logged
1977 CB550K
1979 GL1000 - Current project, winter '09-'10
1979 CX500
1976 Suzuki GT500 Titan

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Will JB Weld work?
« Reply #8 on: September 02, 2008, 11:42:56 AM »
Very straigfoward fix.

Shove that connecting rod back in. 

Stiff some screening in the hole.

Apply the JB Weld, let it cure and sand.

Kawasaki had some nice running bikes with 3 cylinders.  ;D ;D ;D
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: Will JB Weld work?
« Reply #9 on: September 02, 2008, 11:44:05 AM »
Quote from: Sporkfly on September 02, 2008, 11:40:15 AM
Why you have your rod just hanging out there?  :-\

    It's hanging out 'cause it's lazy, shiftless, and good for nothin' ;)
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: Will JB Weld work?
« Reply #10 on: September 02, 2008, 11:47:15 AM »
Quote from: BobbyR on September 02, 2008, 11:42:56 AM
Very straigfoward fix.

Shove that connecting rod back in. 

Stiff some screening in the hole.

Apply the JB Weld, let it cure and sand.

Kawasaki had some nice running bikes with 3 cylinders.  ;D ;D ;D

   I was thinking of yanking the piston and rod through the hole. I've run on 3 for many a mile and may just use this for the commute. Will this affect my crankcase pressure? thinking of sticking a one-way valve in the center of the JB patch job ;D
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

KingCustomCycles.com

  • Guest
Re: Will JB Weld work?
« Reply #11 on: September 02, 2008, 11:54:57 AM »
I hate to get all technical and s**t at this point but the bond to the metal will be enhanced with a bath in MEK, acetone, or Lacquer thinner.  It isen't the JB I would worry about failing as much as the substrate bond. ::)  Paint the little dobble to match and rock on!

If ya coat that there JB Weld with Kreem tank sealer it will reattach a broken float support post that has been drilled and pinned also and save unstacking the rack. 
« Last Edit: September 02, 2008, 11:58:40 AM by KingCustomCycles.com »
Logged

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Will JB Weld work?
« Reply #12 on: September 02, 2008, 12:03:51 PM »
Going for the Triumph Trident sound huh?

Ya poser  ;D
Logged
Stranger in a strange land

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: Will JB Weld work?
« Reply #13 on: September 02, 2008, 12:21:03 PM »
Quote from: kghost on September 02, 2008, 12:03:51 PM
Going for the Triumph Trident sound huh?

Ya poser  ;D

    It DOES have the generous brit bike oil leak going for it now. A bit of paint and.......hmmmmmm. I think your on to something!  ;D
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline ev0lve

  • Master
  • *****
  • Posts: 1,930
Re: Will JB Weld work?
« Reply #14 on: September 02, 2008, 12:22:09 PM »
Holy smokes! I'm going to have to fly my noob flag here. I mean, I've used JB on cracked alternator covers and the like but that was just a seam. This though...? You guys are joking here and I'm just not getting it right? Would JB actually be effective on that big a hole even with something like a mesh to let hold it's shape?
Logged

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Will JB Weld work?
« Reply #15 on: September 02, 2008, 12:27:35 PM »
If that's what you call a small hole....OH never mind, It's an American small hole ;D ;D ;D ;D ;D ;D ;D

Sam and Chris ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

KingCustomCycles.com

  • Guest
Re: Will JB Weld work?
« Reply #16 on: September 02, 2008, 12:29:08 PM »
Yes, the picture shows a rod failure and the post is regarding a rock chip.  Unless I missed the boat also?  It has happened a time or two.
Logged

Offline WFO

  • Will work for powerbands
  • Expert
  • ****
  • Posts: 920
Re: Will JB Weld work?
« Reply #17 on: September 02, 2008, 12:50:31 PM »
Quote from: KingCustomCycles.com on September 02, 2008, 12:29:08 PM
Yes, the picture shows a rod failure and the post is regarding a rock chip.  Unless I missed the boat also?  It has happened a time or two.


Yep the rock thing had me confused as well that section was clearly knocked ( out ) not in.
Logged
82 cb650 sc nighthawk - 78 kz 650 b

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: Will JB Weld work?
« Reply #18 on: September 02, 2008, 01:07:59 PM »
 Definite "tongue in cheek" first post gentlemen :)  I've seen pics of rods kicking holes in cases before but this is my first time having it happen to me. The amount of aluminum that was kicked out of both upper and lower cases was so "over the top" compared to what I had seen previously that I didn't bother to make it clear as to what had happened. It was a SPECTACULAR FAILURE!!!!! ;D ;D ;D ;D
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,606
Re: Will JB Weld work?
« Reply #19 on: September 02, 2008, 01:10:45 PM »
Yah, you had me going too.  I thought, "crap, what the heck is he talking about, stone???"  At first I thought it was Harley art... ;D
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: Will JB Weld work?
« Reply #20 on: September 02, 2008, 01:16:21 PM »
The "something kicked up and knocked a small hole in my case" was my rod kicking over the crankshaft on its way to freedom from the confining cases ;) ;D
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline Brantley

  • Drano
  • Hot Shot
  • ***
  • Posts: 314
Re: Will JB Weld work?
« Reply #21 on: September 02, 2008, 01:43:16 PM »
You don't keep a piece of chewing gum in yr bike's tool kit? ::)
« Last Edit: September 02, 2008, 01:46:36 PM by Brantley »
Logged

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Will JB Weld work?
« Reply #22 on: September 02, 2008, 01:54:52 PM »
Quote from: scondon on September 02, 2008, 01:16:21 PM
The "something kicked up and knocked a small hole in my case" was my rod kicking over the crankshaft on its way to freedom from the confining cases ;) ;D

I'll bet you were screwing it's bollocks off, how many times do you have to be told....theres no power after 9,000 ::) ::) ::) ::) ::) ::)

Sam.
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Will JB Weld work?
« Reply #23 on: September 02, 2008, 02:00:46 PM »
Quote from: SamCR750 on September 02, 2008, 01:54:52 PM
Quote from: scondon on September 02, 2008, 01:16:21 PM
The "something kicked up and knocked a small hole in my case" was my rod kicking over the crankshaft on its way to freedom from the confining cases ;) ;D

I'll bet you were screwing it's bollocks off, how many times do you have to be told....theres no power after 9,000 ::) ::) ::) ::) ::) ::)

Sam.

Yeah well...ya have to check...might be hiding there.
Logged
Stranger in a strange land

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Will JB Weld work?
« Reply #24 on: September 02, 2008, 02:01:17 PM »
Quote from: scondon on September 02, 2008, 01:16:21 PM
The "something kicked up and knocked a small hole in my case" was my rod kicking over the crankshaft on its way to freedom from the confining cases ;) ;D


Well at least the conrod cap made it out to spread the word about the unfair labor practices you make them work under ;)  Just wait, your output shaft components will be the next to revolt.

mystic_1
Logged
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0
Pages: [1] 2 3   Go Up
« previous next »