Author Topic: Need Honda Help  (Read 862 times)

0 Members and 1 Guest are viewing this topic.

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Need Honda Help
« on: September 03, 2008, 09:24:19 AM »
OK, I'm screwed good now.
I cannot find the 10mm washer that goes on the inside end of the tach drive shaft - inside the cam/cover/bearing, you put it on when you install the cam.
Part # 90452-283-000   CB450

Looked everywhere, can't find one.

Anyone have an extra they can help me out with???


bill
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline mattcb350f

  • Hardly a
  • Master
  • *****
  • Posts: 1,625
  • 1974 CB350F
Re: Need Honda Help
« Reply #1 on: September 03, 2008, 12:04:20 PM »
Hmmmm. That's no good at all Bill :(

Maybe send 'ProTeal55' a personal message, he had or still has a 450 which he did a lot of work on, a rode for quite a while.

He might have a source for parts for ya.

 Matt.
1974 CB350F,  1980 CB125S,  1981 XL80S
Non Honda's: 86 & 87 Husqvarna 400wr's

My CB350F resto: http://forums.sohc4.net/index.php?topic=30467.0
Gallery at:
http://gallery.sohc4.net/main.php?g2_itemId=298318