« previous next »
Pages: [1]   Go Down

Author Topic: Electrical problem  (Read 657 times)

0 Members and 1 Guest are viewing this topic.

Bernhard1

  • Guest
Electrical problem
« on: September 07, 2008, 09:17:15 PM »
I have a 1975 CB750K5.  Had been running well. Recently while on a ride all electrical shut sown and engine died.  Pulled left side panel and noticed the main fuse (15A) was burned out.  Replaced with a 7A (took the top one (of the three fuses in the box) and used it for the main.  Bike started but no lights. 

What would cause the main to go out like that all of a sudden while riding.  Regulator or Rectifier problem?  Can't ride until problem is fixed.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: Electrical problem
« Reply #1 on: September 07, 2008, 09:25:31 PM »
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Bernhard1

  • Guest
Re: Electrical problem
« Reply #2 on: September 07, 2008, 09:57:12 PM »
Thank you.  Will look into the fuse holder to see if there is corrosion.  Hope that works.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: Electrical problem
« Reply #3 on: September 07, 2008, 10:00:39 PM »
Some oxidation is transparent, still resistive and generates heat.  If your fuse is melting at the end caps, its heating from external sources and not blowing from over-current.

Cheers,
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.
Pages: [1]   Go Up
« previous next »