Author Topic: drive chain question  (Read 1722 times)

0 Members and 1 Guest are viewing this topic.

bike54

  • Guest
drive chain question
« on: September 15, 2005, 04:37:29 AM »
hi all
well the old girl is finally to my liking just a couple of maitanace things to do get some new tyres and a new chain and sprokets the question is the chain thats on has a split link in it is that ok for the type of power where talking about (50 bhp) or should i get a continous one the old girl is a 1977 cb550 k3

merv

Offline SteveD CB500F

  • Global Moderator
  • Old Timer
  • *****
  • Posts: 4,553
  • Ride on the Steel Breeze...
    • TVAM
Re: drive chain question
« Reply #1 on: September 15, 2005, 05:15:31 AM »
Split links are fine on these bikes. I've used them for nearly 30 years and both my current bikes have them.

Make sure that you install them with the closed end of the link facing forwards!
SOHC4 Member #2393
2015 Tiger 800 XRT
1971 CB500K0 (US Model)

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,476
Re: drive chain question
« Reply #2 on: September 15, 2005, 05:23:58 AM »
steve,forward on the top or on the bottom
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: drive chain question
« Reply #3 on: September 15, 2005, 05:26:12 AM »
Was just going to say, using this description, on the "top." More accurately perhaps is the closed end should face the direction of chain travel.
We'll all be someone else's PO some day.

Offline SteveD CB500F

  • Global Moderator
  • Old Timer
  • *****
  • Posts: 4,553
  • Ride on the Steel Breeze...
    • TVAM
Re: drive chain question
« Reply #4 on: September 15, 2005, 05:36:35 AM »
I didn't think it was that ambiguous!

"Forward" as in "facing the direction of travel" (thanks Bob, I won't delete your posts after all...)
SOHC4 Member #2393
2015 Tiger 800 XRT
1971 CB500K0 (US Model)

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,476
Re: drive chain question
« Reply #5 on: September 15, 2005, 06:11:28 AM »
thanks bob,u da man
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

bike54

  • Guest
Re: drive chain question
« Reply #6 on: September 15, 2005, 11:19:24 AM »
thanks
steve and bob thats the answer i was hoping for and bob thanks for your previous posts you have ansered a lot of my questions witout having to post
steves just jelous lol  ;) ;)
merv

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,476
Re: drive chain question
« Reply #7 on: September 15, 2005, 11:59:19 AM »
now you done it merv,steve`s gonna delete your posts
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

bike54

  • Guest
Re: drive chain question
« Reply #8 on: September 15, 2005, 02:04:29 PM »
now you done it merv,steve`s gonna delete your posts

you know me open mouth then engage brain although i do like humble pie i eat it quite often and thinking back to steves photo i think i just made a big mistake lol

mervĀ  ;) ;)
« Last Edit: September 15, 2005, 02:06:30 PM by bike54 »

Offline Lumbee

  • Expert
  • ****
  • Posts: 1,498
    • My pics...
Re: drive chain question
« Reply #9 on: September 15, 2005, 03:29:19 PM »
...anybody no if the $30 chain from cycle recycle is any good?
----------
"I'm not a welder, but I play one on HondaChopper.com"