Author Topic: New to me!  (Read 1569 times)

0 Members and 2 Guests are viewing this topic.

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
New to me!
« on: October 15, 2008, 06:59:04 PM »
Well, I had been looking for a winter project and a bike for my son, and it looks like I found both. The good: 2000 Suzuki sv650 with 2200 miles, original owner. The bad: left sitting under a porch for a while, with tranny and or clutch problems. I think it's clean-upable, and the price was right. Anyway, it'll be interesting. I'll post before photos and hopefully after ones eventually as well.

Offline sparty

  • I just play one on TV
  • Master
  • *****
  • Posts: 1,788
  • My engine is 100% stock... wink.
    • Gallery
Re: New to me!
« Reply #1 on: October 15, 2008, 07:17:28 PM »
Well, I had been looking for a winter project and a bike for my son, and it looks like I found both. The good: 2000 Suzuki sv650 with 2200 miles, original owner. The bad: left sitting under a porch for a while, with tranny and or clutch problems. I think it's clean-upable, and the price was right. Anyway, it'll be interesting. I'll post before photos and hopefully after ones eventually as well.

Ben,

I had a SV650 and it was a really fun bike to ride fast.  It was very sporty in the twisties and would wheelie easily good brakes also.  They make some pretty good power down low and in the mid-range, but they suffer up top IMO - typical of a V-twin.  Good gas milage as well and the insurance isn't to expensive.  They PO most likely rode it hard and fried the clutch.  Those trannys are real smooth when cared for properly.  I suspect that as the clutch was fried, the PO was most likely shifting with a clutch that wasn't engaging properly and may have buggered the early gears.  Over the winter, crack it and take some pics.  You can find parts easily for low $$$.

Art
1972 CB750 K2 Cafe' Style




GO AWAY SNOW AND COLD!  Can you see the Hot Rod wants to run...
“That's thirty minutes away. I'll be there in ten.”

Offline unkle fester

  • Enthusiast
  • **
  • Posts: 107
Re: New to me!
« Reply #2 on: October 15, 2008, 07:18:42 PM »
http://forum.svrider.com/    a real good forum for the SV's......a ton of mods can be done to them.....unbelievable torque those things have.......also have to get used to the unreal engine braking it has.....

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: New to me!
« Reply #3 on: October 15, 2008, 07:23:22 PM »
Thanks guys! I'll check out the forum as there's all sorts of stuff to figure out. My son and I appreciate the encouragement and help!

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: New to me!
« Reply #4 on: October 17, 2008, 03:35:04 PM »
Well we brought it home today, here's a few photos. It had been sitting out for a bit and it'll require some cleaning up. I am hopeful that the shift linkage is the most serious problem I face rather than splitting the cases, but we'll see. For $500. I am pretty happy. I have the original red tank, but it has some rust on the interior, and I'll have to treat it before trying to use it.

Offline KB02

  • Take it easy there, Sonny, I'm an
  • Old Timer
  • ******
  • Posts: 3,760
Re: New to me!
« Reply #5 on: October 18, 2008, 05:20:09 AM »
That's a hell of a deal for $500.  :o  Even with a bad tranny...
1978 CB750K Project
2000 Ducati ST2
...and a pedal bike

Join the AMA today!!

My project thread Part I: K8 Project "Parts Bike"
My project thread Part II: Finishing (yeah, right) touches on Project "Parts Bike"

Offline magnus72

  • Enthusiast
  • **
  • Posts: 105
Re: New to me!
« Reply #6 on: October 18, 2008, 11:39:49 AM »
awesome deal. I love mine even though it gave me some trouble for a time. Its the perfect city bike.

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: New to me!
« Reply #7 on: October 18, 2008, 03:18:44 PM »
What kind of trouble did you have? What year is yours?

Thanks!
Ben

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: New to me!
« Reply #8 on: November 09, 2008, 03:01:44 PM »
Well, After puttering around for a couple of afternoons and an evening, I got the little V running today and took it for a spin. My tranny problem was due to shift linkage problems related to insufficient care. My biggest problems were related to the fuel system and I ended up buying a new set of carbs off ebay, which I had to rebuild anyhow, as whoever pulled them left gas in them. Anyway it's a fun little guy, very light and agile. It goes well above 5k but, as Sparty says, it doesn't have a whole lot of torque. It's a great first bike, and I'm hoping my son likes it!

Offline sparty

  • I just play one on TV
  • Master
  • *****
  • Posts: 1,788
  • My engine is 100% stock... wink.
    • Gallery
Re: New to me!
« Reply #9 on: November 09, 2008, 07:31:42 PM »
Well, After puttering around for a couple of afternoons and an evening, I got the little V running today and took it for a spin. My tranny problem was due to shift linkage problems related to insufficient care. My biggest problems were related to the fuel system and I ended up buying a new set of carbs off ebay, which I had to rebuild anyhow, as whoever pulled them left gas in them. Anyway it's a fun little guy, very light and agile. It goes well above 5k but, as Sparty says, it doesn't have a whole lot of torque. It's a great first bike, and I'm hoping my son likes it!

Ben,

That bike should make pretty decent torque... about 62 ft. lbs.  For its size and weight, that is pretty good.  The new ones make 80.

Sparty
1972 CB750 K2 Cafe' Style




GO AWAY SNOW AND COLD!  Can you see the Hot Rod wants to run...
“That's thirty minutes away. I'll be there in ten.”

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: New to me!
« Reply #10 on: November 10, 2008, 03:08:32 AM »
Thanks for the info Art. It's difficult for me to judge performance on this bike, as my experiences for the past few years have all been on larger displacement bikes. Am I nuts to think that displacement and torque are proportional? Sure feels that way!
I think this sv is running close to as it should, but I still have to balance the carbs and mess with the clutch adjustment before I'll have a real good idea of what it does and doesn't do. I was really just so happy to get it going and find that I didn't have to split the cases to do so!

All best!
Ben