« previous next »
Pages: [1]   Go Down

Author Topic: newb help.... can't find my answer in the manual.. LOL  (Read 1134 times)

0 Members and 1 Guest are viewing this topic.

Offline oldhondarider

  • http://indimediaimages-shepdog.blogspot.com/
  • Hot Shot
  • ***
  • Posts: 496
  • http://indimediaimages-shepdog.blogspot.com/
newb help.... can't find my answer in the manual.. LOL
« on: November 12, 2008, 08:25:01 AM »
I need help...I don't have a clue how to get this little bugger off the rim...



cause I need to get this out...




any thoughts? ( The manual seems to be pretty vague on the issue) LOL
Logged
"I have never seen a wild thing feel sorry for itself. A little bird will fall dead, frozen from a bough, without ever having felt sorry for itself."   D. H. Lawrence

Welsh Customs, Tacoma Washington

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: newb help.... can't find my answer in the manual.. LOL
« Reply #1 on: November 12, 2008, 08:35:40 AM »
The first picture is your axle nut. Find a wrench to fit it. THe second picture is your axle which goes all the way through the hub and is the inside of the nut in pic 1. There should be a hole in the axle end that you can put a large size Phillips screwdriver or punch in.

THen turn the nut off on the other end. Easier said than done as holding the axle end can be a struggle. Put a length of pipe on the screwdriver or punch so it goes to the floor and you have something to turn against. Or put the axle in a vice.

Once the nut is off, you can pull the axle out from the speedo drive side if necessary.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline oldhondarider

  • http://indimediaimages-shepdog.blogspot.com/
  • Hot Shot
  • ***
  • Posts: 496
  • http://indimediaimages-shepdog.blogspot.com/
Re: newb help.... can't find my answer in the manual.. LOL
« Reply #2 on: November 12, 2008, 08:57:42 AM »
thank you...  I was struggling like a #$%**@)@!!!! #$#$#$  to get that thing off.. never thought of the pipe over a screw driver..

thanks!
Logged
"I have never seen a wild thing feel sorry for itself. A little bird will fall dead, frozen from a bough, without ever having felt sorry for itself."   D. H. Lawrence

Welsh Customs, Tacoma Washington

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: newb help.... can't find my answer in the manual.. LOL
« Reply #3 on: November 12, 2008, 09:11:27 AM »
You're welcome. A little PB Blaster or WD-40 type penetrant douldn't hurt. Good luck!
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline ev0lve

  • Master
  • *****
  • Posts: 1,930
Re: newb help.... can't find my answer in the manual.. LOL
« Reply #4 on: November 12, 2008, 09:13:34 AM »
 ;D I just did that last weekend. It DID take a little more force than I was initially comfortable with (thought the screwdriver would bust).
Logged
Pages: [1]   Go Up
« previous next »