« previous next »
Pages: [1]   Go Down

Author Topic: web cam cb550 hot street/"cafe racer" cam  (Read 1496 times)

0 Members and 1 Guest are viewing this topic.

Offline texaninseattle

  • lots of protein in my
  • Enthusiast
  • **
  • Posts: 249
  • OHH Canada
web cam cb550 hot street/"cafe racer" cam
« on: November 17, 2008, 02:39:29 pm »
anyone know is this cam will fit a 550 w/o piston modification?

290 deg duration w/ .330 lift

265 deg duration @.050"
Logged
1978 Cb550k(Sold)
emgo pods
mac 4-1
105 mains
stock pilots
needles set 1 step richer than stock
IMS 2 turns out
1982 Suzuki GS850g

Offline valvolux

  • Full Member
  • *
  • Posts: 28
Re: web cam cb550 hot street/"cafe racer" cam
« Reply #1 on: November 17, 2008, 03:03:55 pm »
funny, i was just about to post the same question.
Nice avatar by the way. ;)
Logged
Life's simple. Make choices and don't look back

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: web cam cb550 hot street/"cafe racer" cam
« Reply #2 on: November 17, 2008, 07:28:15 pm »
Should be a direct bolt in, but check with webcam to be sure.

FJ
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline karmasic

  • pull-a-part boy
  • Full Member
  • *
  • Posts: 69
Re: web cam cb550 hot street/"cafe racer" cam
« Reply #3 on: November 18, 2008, 09:26:52 am »
i think you will need some head work with that cam. better valve springs too.
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,542
  • Big ideas....
Re: web cam cb550 hot street/"cafe racer" cam
« Reply #4 on: November 18, 2008, 10:13:41 am »
 That should bolt in but I'd strongly recommend springs....they are not that expensive.
Logged
Owner of the "Million Dollar CB"

Offline texaninseattle

  • lots of protein in my
  • Enthusiast
  • **
  • Posts: 249
  • OHH Canada
Re: web cam cb550 hot street/"cafe racer" cam
« Reply #5 on: November 18, 2008, 10:16:24 am »
MRieck...def. going to do springs with that cam...and going to try my hand at porting the head as well...hope i dont kill the street ability of the bike
Logged
1978 Cb550k(Sold)
emgo pods
mac 4-1
105 mains
stock pilots
needles set 1 step richer than stock
IMS 2 turns out
1982 Suzuki GS850g
Pages: [1]   Go Up
« previous next »