Topic: sohc parts supply?

[Zig]

Hay all.
Parked my T160 and broke one off my k5s down to it basic parts for a frame up rebuilb, while frame is away for paint i started to source parts and am not having much luck finding a supplier. Am looking for deep engine parts ie: cam drive chain, rings, complete gasket set, bottom end bushings and bearings, engine seals etc, Any ideas? Am in Northern Ontario, so closest is bestest. Thanks. Zig.

[Kalamazoo]

Well theres always ebay.

If you haven't noticed there is a list of web sites under FAQ, it should be about the 4th one down and will say something like the online resource list.  This helped me find tons of parts I needed for my bike.

[wrenchmuch]

I'm almost done rebuilding my 750 k1 engine and I got parts from a few different places  http://www.cyclexchange.net/    http://www.dynoman.net/bikepages/sohc/index.html
http://www.bikebandit.com/ . Cycle exchange is about the least expensive and the gasket set is pretty good for the money . They shipped my order by regular mail with no tracking or ins. but it got to me without a problem . Took about a month after I ordered for it to arrive . Got camchain , cam and primary tensioner ,primary chains ,oil cooler adapter (nice ),oil pressure gage ,and gaskets from them. I got seals , and webcam camshaft from Dynoman . Dynoman had quick responses to all e-mails and shipped quickly with fedex . I used bike bandit for bearings and everything else , also quick shipping with fedex . I had good experience with all these suppliers . I had bought parts from cycleworld Mississauga but they are closed now .I don't know who you might be able to buy from in northern ON .
Hope this helps you . have fun with the rebuild
Mike

[super pasty white guy]

Between APE, CycleX, ServiceHonda, Dynoman, and Z1 enterprises, you'll probably be able to locate everything you need.

You might try searching for "Rusty Riders" to pull up a list of (I Think) Terry's list of suppliers for a rebuild.

spwg

[Alan F.]

These are the most commonly used suppliers, they've got what you need and they're great to deal with.  I think some are even members here too.

[OldSchool_IsCool]

Here's another one to try:

http://www.westernhillshondayamaha.com/

Call/email them and ask for "Vintage Parts"

[bert96]

I'm almost done rebuilding my 750 k1 engine and I got parts from a few different places  http://www.cyclexchange.net/    http://www.dynoman.net/bikepages/sohc/index.html
http://www.bikebandit.com/ . Cycle exchange is about the least expensive and the gasket set is pretty good for the money . They shipped my order by regular mail with no tracking or ins. but it got to me without a problem . Took about a month after I ordered for it to arrive . Got camchain , cam and primary tensioner ,primary chains ,oil cooler adapter (nice ),oil pressure gage ,and gaskets from them. I got seals , and webcam camshaft from Dynoman . Dynoman had quick responses to all e-mails and shipped quickly with fedex . I used bike bandit for bearings and everything else , also quick shipping with fedex . I had good experience with all these suppliers . I had bought parts from cycleworld Mississauga but they are closed now .I don't know who you might be able to buy from in northern ON .
Hope this helps you . have fun with the rebuild
Mike

You did not paid any custom and duty fee

When buy something from the US,i always ask to ship my parts with USPS,it take more time to arrive but i don't have to pay another 25% to get my parts,just my 0.02$

Bert