« previous next »
Pages: [1]   Go Down

Author Topic: First rebuild  (Read 1497 times)

0 Members and 1 Guest are viewing this topic.

verage22

  • Guest
First rebuild
« on: March 03, 2009, 09:50:56 PM »
Hey all!  My father and I are doing our first rebuild on a 1979 cb650.  I am having trouble finding pistons and after about 5 hours online I found a website where I can get the pistons rings pins and clips for about 370.  Is this a good price or should I hold out hope to find something on ebay?
Logged

Offline swan

  • Enthusiast
  • **
  • Posts: 249
Re: First rebuild
« Reply #1 on: March 04, 2009, 10:45:09 AM »
Logged
1975 CB400 F cafes, 1974 CB750 K4 Cafe, 1966/1976 Triumph/ Norton Triton Cafe and 1962 DBD34 BSA Gold Star Clubman.

CB750 build http://forums.sohc4.net/index.php?topic=52551.0

verage22

  • Guest
Re: First rebuild
« Reply #2 on: March 04, 2009, 01:53:30 PM »
Def cheaper site!!!! Thank you very much! 
Logged

verage22

  • Guest
Re: First rebuild
« Reply #3 on: March 04, 2009, 04:37:45 PM »
Can I reuse my my old valves if I clean them up and and use a valve grinding compound on the cylinder head.  The old valves really dont look that bad.  The valve seals were bad so that allowed some build up so I am replacing them.  I am trying to get away with not taking it to a Machine shop if I dont have to.
Logged

verage22

  • Guest
Re: First rebuild
« Reply #4 on: March 04, 2009, 05:05:26 PM »
How difficult is the carb rebuild?  I found 4 rebuild kits for 55 for all four. 
Logged

verage22

  • Guest
Re: First rebuild
« Reply #5 on: March 04, 2009, 06:19:19 PM »
Sorry I know its a lot of questions but I just wanna make sure I am doing this right.  Should I replace the valve guide and o-rings as well?
Logged
Pages: [1]   Go Up
« previous next »