Author Topic: Hello from Aus  (Read 1066 times)

0 Members and 1 Guest are viewing this topic.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Hello from Aus
« on: December 04, 2008, 08:29:36 PM »
Hi guys, My name is Mick and i have been browsing this forum for some time now, i have owned 18 Honda 750/4's over the years starting with a K1 in 1979. I am currently building a K4 750 that i bought a few years ago, it has a RC {Russ Collins} crank and rods, venolia pistons, 32mm KR smooth bores, Barnett clutch, 43mm Suzuki gsxr 1100 front end with 3.5 inch front wheel and brakes, shortened gsxr 1100 swingarm with a 4.5 inch rear wheel with rear disc and set up for twin shocks, fully braced frame and a few other goodies. I call this little beast my Retro Rocket.
« Last Edit: December 04, 2008, 11:53:26 PM by retro rocket »
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: Hello from Aus
« Reply #1 on: December 05, 2008, 02:40:28 AM »
Welcome Mick. Post some pics when you get a chance.
We'll all be someone else's PO some day.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Hello from Aus
« Reply #2 on: December 05, 2008, 03:26:51 AM »
Shall do, remember though she's only half done, but you'll get the general idea..

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline volkswagendan

  • Hot Shot
  • ***
  • Posts: 419
  • im a bit off the charts. sorry.
Re: Hello from Aus
« Reply #3 on: December 05, 2008, 06:18:43 AM »
Mick from Australia?   dont even tell me your last name is Fanning?!?!?!
(you land locked peeps might not know what or who i speak of... 2007 asp world surfing champ!)
don't take me too seriously.

Offline Jakoba

  • I'm far from a CB750
  • Hot Shot
  • ***
  • Posts: 254
Re: Hello from Aus
« Reply #4 on: December 05, 2008, 11:29:50 AM »
Welcome aboard Mick.
A friend of my wife lives in Canberra, real sweet girl. She was the backcatcher for the Austrialian National Women's Softball Team.
My wife met her when the World Championships were held in St. john's Newfoundland back in 1993.

Would really love to visit sometime.

Good Luck with the build.

Jako
Jako
Member #4500
--------------
"See the ditch, see the ditch, in the ditch"

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Hello from Aus
« Reply #5 on: December 05, 2008, 03:00:32 PM »
Thanks for the warm welcome fella's and VWDan i live right near the beach but no Fannings in this house... ;D

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline volkswagendan

  • Hot Shot
  • ***
  • Posts: 419
  • im a bit off the charts. sorry.
Re: Hello from Aus
« Reply #6 on: December 06, 2008, 06:04:39 AM »
well mick, its great to be at the beach.
 ...even if your not a Fanning.  welcome again and enjoy the forum. it's Awesome!
don't take me too seriously.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Hello from Aus
« Reply #7 on: December 06, 2008, 04:06:34 PM »
Thanks for the warm welcome Dan, do you play guitar ? you really look like you do or should.. ;D

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline cben750f0

  • nothin draws attention like a classic bike!!
  • Master
  • *****
  • Posts: 1,612
  • '75 CB750F0 Gladstone NQLD OZ
Re: Hello from Aus
« Reply #8 on: December 07, 2008, 01:35:30 PM »
Hey there M8!!, welocome to the board, and welcome from another ozzy... good to see!!!

heaps -o-help here..

peace
you are never to old, to act like a kid... be safe
funny thing,chasing someone down hill on a bike 30 years older than theirs..
he said \\\\\\\'it was like watching a 250kg unguided weapon getting stuck up you bum\\\\\\\ http://www.bikepics.com/members/trixtrem/

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Hello from Aus
« Reply #9 on: December 07, 2008, 04:40:34 PM »
Thanks for the welcome, I see your a Kiwi, my wife's from Rotorua, beautiful place..

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline cben750f0

  • nothin draws attention like a classic bike!!
  • Master
  • *****
  • Posts: 1,612
  • '75 CB750F0 Gladstone NQLD OZ
Re: Hello from Aus
« Reply #10 on: December 08, 2008, 12:43:56 AM »
Na not a kiwi M8, and an ozzy, just over here to study, 2 years to go..lol

rotorua is a great place, realy liked it, am livin in auckland atm....not such a nice place..lol


peace
you are never to old, to act like a kid... be safe
funny thing,chasing someone down hill on a bike 30 years older than theirs..
he said \\\\\\\'it was like watching a 250kg unguided weapon getting stuck up you bum\\\\\\\ http://www.bikepics.com/members/trixtrem/

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Hello from Aus
« Reply #11 on: December 08, 2008, 12:52:02 AM »
Yeah, i heard it can get a bit rough up that way....


Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline volkswagendan

  • Hot Shot
  • ***
  • Posts: 419
  • im a bit off the charts. sorry.
Re: Hello from Aus
« Reply #12 on: December 08, 2008, 08:31:45 AM »
hahahaha, i know... i look crazy in my pic as if i should be rocking on stage with KISS.
but no. i dont.     i do play a mean guitar hero on the playstation though.
maybe it's time to change up my pic. hahaha.
don't take me too seriously.