« previous next »
Pages: 1 2 3 [4]   Go Down

Author Topic: Anubis Cycle - Out of Business?  (Read 10335 times)

0 Members and 1 Guest are viewing this topic.

Offline my78k

  • I am Meat-O of the Hungry Horses MC
  • Old Timer
  • ******
  • Posts: 2,839
Re: Anubis Cycle - Out of Business?
« Reply #75 on: December 30, 2008, 06:12:52 AM »
Well atleast you had it right in the step by step shipping instructions....the only problem with that is we are guys and by nature we don't read instructions!  ;D

Dennis
Logged

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Anubis Cycle - Out of Business?
« Reply #76 on: December 30, 2008, 08:12:29 AM »
Quote from: my78k on December 30, 2008, 06:12:52 AM
Well atleast you had it right in the step by step shipping instructions....the only problem with that is we are guys and by nature we don't read instructions!  ;D

Dennis

I know that one personally - I don't read them unless I get myself in trouble.
Logged
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline mrosso

  • Enthusiast
  • **
  • Posts: 189
  • The before picture.
Re: Anubis Cycle - Out of Business?
« Reply #77 on: December 30, 2008, 12:56:19 PM »
Anubis makes good! Received my drilled rotor last week. Thanks for taking care of this... much appreciation.
Mario
Logged

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Anubis Cycle - Out of Business?
« Reply #78 on: December 30, 2008, 04:02:50 PM »
Quote from: mrosso on December 30, 2008, 12:56:19 PM
Anubis makes good! Received my drilled rotor last week. Thanks for taking care of this... much appreciation.
Mario

I really am sorry that it all took so damn long. I will honor that offer to drill another for you in the new pattern for zip, zero, zilch..

Regards
Logged
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline tygrant

  • Hot Shot
  • ***
  • Posts: 323
Re: Anubis Cycle - Out of Business?
« Reply #79 on: December 30, 2008, 05:44:42 PM »
Quote from: goon 1492 on December 11, 2008, 01:08:58 PM
Ok I got the size from the other thread that I posted a link to, and it was 10.904", so 10-7/8"(10.875) is close enough.  Heffay I forgot to mention that lower grade stainless will rust, just not that much. I did get a chance to make a version like the one I did with the sprial hole pattern for a 550, it is 10.904" in dia. Here ya go......
I claim no responsibility for your rotors.(waiver :P )


HEY GOON,

i used your pattern and it came out da ballz. check the little drill press the gf got me for xmas. the little lasers are actualy really cool and help out when drilling alot of holes. i put a light chamfer on the edges and lightly hand sanded them. Thanks again bro
Logged
1975 CB550F - cafe
2001 YZF-R6
2002 HD fatboy

Offline goon 1492

  • Sucka Repellant
  • Master
  • *****
  • Posts: 2,088
  • RIGHT ON TO THE REAL AND DEATH TO THE FAKERS
Re: Anubis Cycle - Out of Business?
« Reply #80 on: December 31, 2008, 06:41:14 AM »
A-W-E-S-O-M-E!!!!  8) Glad to see that it worked out for you, man I need a drill press.......
Now you just need some black or red caliper paint for the center of the disc. ;)
I was thinkin about starting a new thread for this, the patterns and misc. pics for all to see, and to end this thread because Anubis cycle is not out of business and sounds like the man is coming along fine.
Logged
We are not humans going thru a spiritual experience...
We are spirits going thru a human experience....

Offline my78k

  • I am Meat-O of the Hungry Horses MC
  • Old Timer
  • ******
  • Posts: 2,839
Re: Anubis Cycle - Out of Business?
« Reply #81 on: January 02, 2009, 06:59:50 AM »
Quote from: dave400 on December 13, 2008, 11:35:07 AM
Quote from: heffay on December 13, 2008, 11:29:18 AM
i wanted to leave because of him back when i was a real moderator...  there is no moderating elcheapo

countless reported posts on his behalf!

Goodbye heff  ;D


I think Heff called your bluff....this was his last post and he has not been active on here since the 13th.

Dennis
Logged

upperlake04

  • Guest
Re: Anubis Cycle - Out of Business?
« Reply #82 on: January 02, 2009, 07:29:05 AM »
  Those days were unhappy ones here on the forum Dennis. I hope Heffay is only away on a holiday.
Logged

eldar

  • Guest
Re: Anubis Cycle - Out of Business?
« Reply #83 on: January 02, 2009, 07:53:30 AM »
It has been worse. Remember the political stuff? Really, unless I missed something, that was worse than anything that happened on the forum before, except maybe silicondoc.

I think heffay took it too personal and just could not let it go. Pretty sad when tom had been gone over a year and when he came back hef dredged it all back up. If that is the case, hef brought this on himself unfortunately. It would have been better to just sit back and not say anything or even read the thread at all. So far, tom has not caused trouble and has only defended himself. I hope hef comes back and him and tom just steer clear of each other. :-\
Logged

Offline my78k

  • I am Meat-O of the Hungry Horses MC
  • Old Timer
  • ******
  • Posts: 2,839
Re: Anubis Cycle - Out of Business?
« Reply #84 on: January 02, 2009, 08:40:07 AM »
Oh I agree...they both add value to the forums. Although I gotta say that if can't get along with someone then you should atleast be able to avoid them. I mean we are talking about an online forum here. This isn't exactly like a school bullying incident where you have to see that person everyday and can't avoid them.

I would love to see everyone kiss and make-up on here but somehow I can't see it happening...too much water under the bridge maybe?

Dennis
Logged

Offline moham

  • .fnord.
  • Expert
  • ****
  • Posts: 1,108
Re: Anubis Cycle - Out of Business?
« Reply #85 on: January 02, 2009, 09:04:01 AM »
Quote from: my78k on January 02, 2009, 08:40:07 AM
I mean we are talking about an online forum here. This isn't exactly like a school bullying

Speak for yourself. Every time I go from here to the project forum, some thug steals my lunch money...
Logged
78 750K-The Ocho
74 550-The Cherry Picker
70 750K0 motor-Dick in a Box

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anubis Cycle - Out of Business?
« Reply #86 on: January 02, 2009, 02:08:53 PM »
Quote from: moham on January 02, 2009, 09:04:01 AM
Quote from: my78k on January 02, 2009, 08:40:07 AM
I mean we are talking about an online forum here. This isn't exactly like a school bullying

Speak for yourself. Every time I go from here to the project forum, some thug steals my lunch money...

Hey I only borrowed that money mate, and I'll pay it back on Thursday, OK? Anyway, you need lunch like I need alcohol, ha ha! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline moham

  • .fnord.
  • Expert
  • ****
  • Posts: 1,108
Re: Anubis Cycle - Out of Business?
« Reply #87 on: January 02, 2009, 06:48:23 PM »
Quote from: Terry in Australia on January 02, 2009, 02:08:53 PM
Quote from: moham on January 02, 2009, 09:04:01 AM
Quote from: my78k on January 02, 2009, 08:40:07 AM
I mean we are talking about an online forum here. This isn't exactly like a school bullying

Speak for yourself. Every time I go from here to the project forum, some thug steals my lunch money...

Hey I only borrowed that money mate, and I'll pay it back on Thursday, OK? Anyway, you need lunch like I need alcohol, ha ha! ;D

what are ya tryin to say Terry? Anyway, where I come from alcohol is lunch...
Logged
78 750K-The Ocho
74 550-The Cherry Picker
70 750K0 motor-Dick in a Box

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: Anubis Cycle - Out of Business?
« Reply #88 on: February 06, 2009, 10:35:33 AM »
all right... cheapo... you're right... you are a perfect businessman and a well adjusted chap.

i did take it too personally... perhaps that is due to all of the posts i had to read and destroy while a mod (most of you never even came close to having the privilege of reading such vehement tongue lashings) ... i'll never forget those.

also, anyone telling me to not read a post is deluded... anyone w/ a post count over 4k should understand that i've read nearly every thread on this entire forum and i'm not gonna stop now.

from now on, i'm gonna try to stick to my video and photo threads and steer clear of politics especially.

anyway, i'm back... and i'll stay away from cheapo as the forum requests. 
« Last Edit: February 06, 2009, 10:39:45 AM by heffay »
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Anubis Cycle - Out of Business?
« Reply #89 on: February 06, 2009, 12:40:15 PM »
Welcome back Heff!!!!

I missed you!!!

Got some questions for you man.

I tried PM but at work my access is somewhat denied.
Logged
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline oldhondarider

  • http://indimediaimages-shepdog.blogspot.com/
  • Hot Shot
  • ***
  • Posts: 496
  • http://indimediaimages-shepdog.blogspot.com/
Re: Anubis Cycle - Out of Business?
« Reply #90 on: February 06, 2009, 12:55:56 PM »
Welcome back.
Logged
"I have never seen a wild thing feel sorry for itself. A little bird will fall dead, frozen from a bough, without ever having felt sorry for itself."   D. H. Lawrence

Welsh Customs, Tacoma Washington

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anubis Cycle - Out of Business?
« Reply #91 on: February 06, 2009, 10:27:39 PM »
Yeah, welcome back Heffy, I think you'll be around longer than Tom anyway. Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Anubis Cycle - Out of Business?
« Reply #92 on: February 06, 2009, 10:39:50 PM »
HEFFAY !!!   welcome indeed
Logged

Offline SteveD CB500F

  • Global Moderator
  • Old Timer
  • *****
  • Posts: 4,553
  • Ride on the Steel Breeze...
    • TVAM
Re: Anubis Cycle - Out of Business?
« Reply #93 on: February 07, 2009, 02:52:10 AM »
Welcome back Geoff.

You're right of course. Any old timer on here has to develop a thick skin and a sixth sense as to when to ignore a thread and let the newer hotheads fight it out!
Logged
SOHC4 Member #2393
2015 Tiger 800 XRT
1971 CB500K0 (US Model)

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Anubis Cycle - Out of Business?
« Reply #94 on: February 07, 2009, 08:47:21 AM »
Welcome back Heff.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Anubis Cycle - Out of Business?
« Reply #95 on: June 11, 2012, 03:55:14 PM »
I am still in business. The turn around time is 1-2 days.

Send to

Anubis Cycle LLC
703 Central Ave #2
Coon Valley WI 54623

Using the other guy results in less than perfect drilling patterns. I know I have duplicated his patterns and they are noticeably off even by the eye. Hardly worth the better part of a hundred bucks.
Logged
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: Anubis Cycle - Out of Business?
« Reply #96 on: June 11, 2012, 04:32:52 PM »
Quote from: BobbyR on December 09, 2008, 01:08:59 PM
Quote from: ct_racer on December 09, 2008, 09:55:17 AM
I might be interested, but I have 500 rotors, would things still line up?  Also does anyone know what this does to the longevity of the rotor?  I've heard they are already prone to breaking.
WHat i have read is that certain alloys will crack if too aggresively drilled. What alloy(s) were used over the 9 year production is anyones guess.

Disc brake rotors are 400 series stainless known as ferritic stainless.
Very tough.
Logged

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Anubis Cycle - Out of Business?
« Reply #97 on: June 11, 2012, 05:46:24 PM »
Quote from: lucky on June 11, 2012, 04:32:52 PM
Quote from: BobbyR on December 09, 2008, 01:08:59 PM
Quote from: ct_racer on December 09, 2008, 09:55:17 AM
I might be interested, but I have 500 rotors, would things still line up?  Also does anyone know what this does to the longevity of the rotor?  I've heard they are already prone to breaking.
WHat i have read is that certain alloys will crack if too aggresively drilled. What alloy(s) were used over the 9 year production is anyones guess.


    Ferritic stainless steels generally have better engineering properties than austenitic grades, but have reduced corrosion resistance, because of the lower chromium and nickel content. They are also usually less expensive. They contain between 10.5% and 27% chromium and very little nickel, if any, but some types can contain lead. Most compositions include molybdenum; some, aluminium or titanium. Common ferritic grades include 18Cr-2Mo, 26Cr-1Mo, 29Cr-4Mo, and 29Cr-4Mo-2Ni. These alloys can be degraded by the presence of \sigma chromium, an intermetallic phase which can precipitate upon welding.


Disc brake rotors are 400 series stainless known as ferritic stainless.
Very tough.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?
Pages: 1 2 3 [4]   Go Up
« previous next »