« previous next »
Pages: [1]   Go Down

Author Topic: Needing new Primary Chain Tensioner for CB750 project  (Read 1548 times)

0 Members and 1 Guest are viewing this topic.

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Needing new Primary Chain Tensioner for CB750 project
« on: December 11, 2008, 05:04:06 PM »
I've searched here to no significant result. Any suggestions other than OEM? I thought M3 had one but I looked at their site with no result.

I'm happy to use a new OEM, but thought I would ask. Am cost conscious, OEM around $80.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,594
  • Big ideas....
Re: Needing new Primary Chain Tensioner for CB750 project
« Reply #1 on: December 11, 2008, 05:07:10 PM »
Quote from: MCRider on December 11, 2008, 05:04:06 PM
I've searched here to no significant result. Any suggestions other than OEM? I thought M3 had one but I looked at their site with no result.

I'm happy to use a new OEM, but thought I would ask. Am cost conscious, OEM around $80.
M3 has a modern cam chain tensioner. Works OK. I've had one in my bike for over 3 years.
Logged
Owner of the "Million Dollar CB"

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Needing new Primary Chain Tensioner for CB750 project
« Reply #2 on: December 11, 2008, 05:15:21 PM »
Quote from: MRieck on December 11, 2008, 05:07:10 PM
Quote from: MCRider on December 11, 2008, 05:04:06 PM
I've searched here to no significant result. Any suggestions other than OEM? I thought M3 had one but I looked at their site with no result.

I'm happy to use a new OEM, but thought I would ask. Am cost conscious, OEM around $80.
M3 has a modern cam chain tensioner. Works OK. I've had one in my bike for over 3 years.
Yes I saw that looking for the Primary Tensioner. May go that way. I'll definitely use a HD cam chain.

Any comments on the Primary Tensioner?
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."
Pages: [1]   Go Up
« previous next »