« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: swingarm needle bearing setup -on the cheap???  (Read 3388 times)

0 Members and 9 Guests are viewing this topic.

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: swingarm needle bearing setup -on the cheap???
« Reply #25 on: December 15, 2008, 10:06:58 am »
Quote from: Soos on December 15, 2008, 06:47:57 am
Needle bearings are evil.....

If you use one way clutch needle bearings it's not so bad, reduces rocking grooves by forcing bearing to move in 1 direction only.
l8r
Wouldn't that make it a plain steel on steel high friction bearing on opposite travel?
PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Markcb750

  • Guest
Re: swingarm needle bearing setup -on the cheap???
« Reply #26 on: December 15, 2008, 03:58:06 pm »
Quote from: crazypj on December 15, 2008, 10:06:58 am
Quote from: Soos on December 15, 2008, 06:47:57 am
Needle bearings are evil.....

If you use one way clutch needle bearings it's not so bad, reduces rocking grooves by forcing bearing to move in 1 direction only.
l8r
Wouldn't that make it a plain steel on steel high friction bearing on opposite travel?
PJ


Not so sure about this one???

What Bearing manufacturer/part number do you use?
« Last Edit: December 15, 2008, 04:28:15 pm by Markcb750 »
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: swingarm needle bearing setup -on the cheap???
« Reply #27 on: December 15, 2008, 04:24:09 pm »
Swingarm, Needle bearings & Cheap, cant fit in the same sentence properly to answer the original question..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way
Pages: 1 [2]  All   Go Up
« previous next »