« previous next »
Pages: [1]   Go Down

Author Topic: Engine Bolts for a 78 CB750K  (Read 967 times)

0 Members and 1 Guest are viewing this topic.

Offline kine8282

  • Enthusiast
  • **
  • Posts: 117
  • "Ceteris paribus, my modis operandi is carpe diem"
Engine Bolts for a 78 CB750K
« on: December 19, 2008, 12:21:10 PM »
I just picked up a 78 CB750K and I need to know where I can get new engine bolts. The right side of the bike is missing the bolts, I took a pic of it. Do I need a special bolt or can I just grab one from HD or any hardware store?
Logged
1975 CB550K aka "Nefertiti"
1978 CB750K aka "Kate"

Offline Jakoba

  • I'm far from a CB750
  • Hot Shot
  • ***
  • Posts: 254
Re: Engine Bolts for a 78 CB750K
« Reply #1 on: December 19, 2008, 01:36:19 PM »
Hey kine8282,
     nice find ;D

For my 78 750K, I order them throught my local Honda Dealer if I can't find them locally at the hardware store.
HOWEVER....I usually look up the thread size and length of the bolt on the fiche from Ronnies Mailorder Warehouse (http://www.ronniesmailorder.com/fiche_select.asp) or Crotch Rocket (www.crotchrocket.com).

Cheers

Jako
Logged
Jako
Member #4500
--------------
"See the ditch, see the ditch, in the ditch"

Offline shoemanII

  • Enthusiast
  • **
  • Posts: 206
  • just another bike nut
Re: Engine Bolts for a 78 CB750K
« Reply #2 on: December 19, 2008, 02:52:37 PM »
most local hardware stores carry metric fasteners.  no need to go OEM, in my view.  i use gr. 8.8 with removable loctite, properly torqued.  am sure a connection of this type will securely restrain these engines from jumping about.   ;)
bobp   
Logged
'96 ducati carb'd 900ss/cr 
'72 dt2
'77cb550k frankenberry:  '77cb550k frame, '78cb550k engine, '78cb550f tank, unknown front-end
Pages: [1]   Go Up
« previous next »