Author Topic: Drag Bikes... Sunday, Sunday, Sunday!!! (Read 25711 times)

benly- ben · « **Reply #25 on:** January 11, 2009, 02:50:02 pm »

certainly,
he is actually still running that double engined triumph today! it is ace to watch!
Ben

Ecosse · « **Reply #26 on:** January 11, 2009, 03:01:34 pm »

very cool ben! like the red, white and blue gear.

Ecosse · « **Reply #27 on:** January 12, 2009, 10:49:08 am »

people will drag race anything, apparently.

info?

HavocTurbo · « **Reply #28 on:** January 12, 2009, 11:12:17 am »

Quote from: Ecosse on January 12, 2009, 10:49:08 am

people will drag race anything, apparently.

info?

Ahahahahahahahahahahahahahahahahahahahahahahahahaha!!!!!

I'm sorry I shouldn't laugh.

benly- ben · « **Reply #29 on:** January 12, 2009, 02:36:36 pm »

Quote from: Ecosse on January 12, 2009, 10:49:08 am

people will drag race anything, apparently.

info?

this is the nsa website (national sprint association) look at the 50th anniversary at Santa pod and look at the photographs. its sprinting but some good bikes there.http://www.sprinting.org.uk/

this is the straightliners that's drag racing, you will be able to access photos from there.http://ccgi.straightliners.force9.co.uk/photopost/showphoto.php?photo=668

the link has photos. people can drag race anything, I'm sure you'll know its just about sorting them into the right classes.
you should ask Sam he knows all about it.
Benny

Ecosse · « **Reply #30 on:** January 12, 2009, 03:42:10 pm »

on the straight liners site looks like a bus in picture 176 is lining up for a go.

great links bb, thanks!

benly- ben · « **Reply #31 on:** January 12, 2009, 03:47:23 pm »

Quote from: Ecosse on January 12, 2009, 03:42:10 pm

on the straight liners site looks like a bus in picture 176 is lining up for a go.

great links bb, thanks!

sometimes you get run wat ya brung classes but i dunno about that one.
Benny

Sam Green Racing · « **Reply #32 on:** January 12, 2009, 09:31:38 pm »

Quote from: benly- ben on January 12, 2009, 02:36:36 pm

you should ask Sam he knows all about it.
Benny

You seem to be doing OK by yourself Benny

keep up the good work

Sam.

benly- ben · « **Reply #33 on:** January 13, 2009, 08:02:12 am »

Quote from: Samcr750 on January 12, 2009, 09:31:38 pm

Quote from: benly- ben on January 12, 2009, 02:36:36 pm

you should ask Sam he knows all about it.
Benny

You seem to be doing OK by yourself Benny keep up the good work

Sam.

cheers sam!!

Ecosse · « **Reply #34 on:** January 21, 2009, 10:58:51 pm »

Wish I had bigger/more/better pix of the first. And I love car engined... anything!

Retro Rocket · « **Reply #35 on:** January 22, 2009, 03:43:21 am »

The engine out of this one is going into my project bike.

This is just after i bought it.

Mick

Ecosse · « **Reply #36 on:** January 22, 2009, 11:50:04 am »

Man that's sweet RR. Just for me, can ya pull the wheelie bars off and spank a few at the stop lights?

I understand it may jeopardize your license, driving record, and bank account. But I could live vicariously through you if just for a little while.

Comeonnow... isn't it worth it?!

Hope to see your next project soon.

Retro Rocket · « **Reply #37 on:** January 22, 2009, 03:14:05 pm »

Don't worry i was so tempted to take it for a run but common sense got the better of me {damn that conscience...

}. As far as the project goes, i haven't done too much yet but here's the link...

http://forums.sohc4.net/index.php?topic=45477.0

Mick

Sam Green Racing · « **Reply #38 on:** January 22, 2009, 03:52:19 pm »

Just had a look at your project Mick, looking good but will the chain line up with that wide wheel ?

Sam.

Retro Rocket · « **Reply #39 on:** January 22, 2009, 03:56:01 pm »

G'day Sam, i had to machine the rear sprocket carrier as much as i could which isn't quite enough but cycle x have offset front sprockets and that should get it right. Its out roughly 10mm at the front.

Mick

Sam Green Racing · « **Reply #40 on:** January 22, 2009, 04:35:27 pm »

Saved me telling you

Sam.

NitroHunter · « **Reply #41 on:** January 22, 2009, 04:37:34 pm »

You guys might like this one.
This is the only pic of my laydown dragbike chassis in it's early stages, that's a carbon fiber 10" wheel with bead locks. It later had a full one piece body and turbo SOHC. I kick myself now for not having shot rolls of film of some of the stuff I played around with!!!
I sold the roller, less motor, when I got an offer I couldn't refuse $$$

Ecosse · « **Reply #42 on:** January 22, 2009, 04:53:43 pm »

Cool stuff Nitro! I hope more drag stuff comes to the surface... for a guy with a car only upbringing this blows the mind a bit.

Sam Green Racing · « **Reply #43 on:** January 22, 2009, 05:18:57 pm »

What's the chassi on the bench Robbie and have you got any action shots of your self ?

Sam.

Sam Green Racing · « **Reply #44 on:** January 22, 2009, 06:04:57 pm »

For you newer guys that might not have seen my mini drag bike in action.
It wouldn't run clean off the line on it's first run but soon overhauled the other guy on the same bike when it cleared it's throat.
It was cleaner on the second run and turned 13.4 102mph, all from just 134ccs

Sam.

NitroHunter · « **Reply #45 on:** January 22, 2009, 06:06:24 pm »

On the bench is my buddie's Top Fuel Harley frame, the red beadlock is it's wheel.
No shots of me on the laydown,

but I JUST posted a couple of burnout pics in the registry.

Sam Green Racing · « **Reply #46 on:** January 22, 2009, 06:17:10 pm »

Just took a look, can't make out the last pic though.
Looks like a guy standing in front of a van and a helmet levitating in the foreground.

Cool.

Sam.

NitroHunter · « **Reply #47 on:** January 22, 2009, 07:54:23 pm »

...And check out the gun sight on the front of the fairing!

Sam Green Racing · « **Reply #48 on:** January 22, 2009, 08:31:45 pm »

What Fairing ?

DarkRider · « **Reply #49 on:** January 23, 2009, 05:06:52 am »

What a time for this sort of topic to come up...here i have been debating building a cross between chopper and drag bike for the street for awhile now.

News:

Author Topic: Drag Bikes... Sunday, Sunday, Sunday!!! (Read 25711 times)