« previous next »
Pages: [1]   Go Down

Author Topic: I need some help from the "Scroungers" out there.............  (Read 744 times)

0 Members and 1 Guest are viewing this topic.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,395
  • So, what do ya wanna talk about today?
I need some help from the "Scroungers" out there.............
« on: January 16, 2009, 03:31:46 PM »
Ok, so Bryan and Big Jay have helped me out greatly with info for my MTC 72mm pistons, I need some new rings for a Honda GL1000 so I can build my 1060cc engine. I had a look at DSS and CMSL and they're too pricey for me, (remember, I am just a poor Aussie with the Oz dollar only worth about 60 US cents at the mo)

I've been scouring EBay with no success, (one turkey wanted 63 bucks for rings for ONE piston!) does anyone else have a better lead? I don't want to pay any more than 20 bucks per piston, if possible? Help me out guys, and I'll drink an Aussie beer (or some fine Kentucky Bourbon) and burp the national anthem in your honor! Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,235
  • ROCK & ROLL
Re: I need some help from the "Scroungers" out there.............
« Reply #1 on: January 16, 2009, 03:38:26 PM »
Give Rex a call terry, i'm sure he will be able to help.

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 14,071
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: I need some help from the "Scroungers" out there.............
« Reply #2 on: January 17, 2009, 08:59:23 AM »
I've had good luck with "mrsuperdeals" (or it might be "mrssuperdeals") at eBay for MC and Rocky rings for the vintage bikes. Typical price is uner $35 per set of 4, and they are decent rings. They have a lot more parts than they ad for.

Make mine Kentucky Bourbon, please...  :D
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline mkramer1121

  • Expert
  • ****
  • Posts: 1,304
Re: I need some help from the "Scroungers" out there.............
« Reply #3 on: January 17, 2009, 09:50:13 AM »
I've bought from these guys before while working on a GL1200, though they're still pricey, they are cheaper then $63:
http://www.saber-cycle.com/store/product335.html
Logged

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,395
  • So, what do ya wanna talk about today?
Re: I need some help from the "Scroungers" out there.............
« Reply #4 on: January 17, 2009, 01:54:12 PM »
Thanks Guys, I thought about "Rusty Riders" too Mark, I bought a couple of sets of rings from them and you're right, they're great. I sent 'em a message yesterday, but haven't received an answer as yet.

Mike, thanks for your help mate, 36 bucks is better than 63 by a huge amount, but I can buy genuine rings from DSS for under 30.

Mick, I haven't asked Rex yet, but I doubt that he'd have any, when he sold his share of the dealership he took all the CB750 stuff, but not much else, and that was so long ago I doubt if he'd have much left anyway. Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: I need some help from the "Scroungers" out there.............
« Reply #5 on: January 17, 2009, 02:03:53 PM »
You interested in used rings?

Paul
Logged
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,395
  • So, what do ya wanna talk about today?
Re: I need some help from the "Scroungers" out there.............
« Reply #6 on: January 17, 2009, 03:20:59 PM »
Well I'd prefer new ones of course Paul, but I wouldn't mind a used set just to make sure they do fit, you got some? ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: I need some help from the "Scroungers" out there.............
« Reply #7 on: January 17, 2009, 05:15:38 PM »
I have 2 used engines here. I'm sure we can see where it gets us.

Paul
Logged
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,395
  • So, what do ya wanna talk about today?
Re: I need some help from the "Scroungers" out there.............
« Reply #8 on: January 17, 2009, 05:20:50 PM »
Thanks mate, I'd appreciate it! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)
Pages: [1]   Go Up
« previous next »