« previous next »
Pages: [1]   Go Down

Author Topic: Frame thickness.. CB 750  (Read 1314 times)

0 Members and 1 Guest are viewing this topic.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,046
Frame thickness.. CB 750
« on: January 31, 2009, 09:35:16 AM »
Need thickness of 1 inch tubing under the seat, so I can order tubing and get on with my project.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline DRMR

  • Full Member
  • *
  • Posts: 12
Re: Frame thickness.. CB 750
« Reply #1 on: February 01, 2009, 08:37:14 AM »
.065 of a inch
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,046
Re: Frame thickness.. CB 750
« Reply #2 on: February 01, 2009, 10:42:32 AM »
Thanks, hope its accurate!
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,649
Re: Frame thickness.. CB 750
« Reply #3 on: February 01, 2009, 07:49:45 PM »
Confirmed, I found a piece I saved from an old rusty and bent up frame from a partsbike.  1/16" or .063" or 1.6002mm  This was a 78 750K btw.
Logged
Pages: [1]   Go Up
« previous next »