Author Topic: Name that part! CB 750 (Read 2662 times)

fishhead · « **on:** January 30, 2009, 02:34:36 PM »

Anybody know what it is? I have had this thing for about 10 years and never seen another like it. I know what it is and it is specifically for the CB 750.
Any guesses?

There is no prize awarded to the winner.

HavocTurbo · « **Reply #1 on:** January 30, 2009, 02:46:48 PM »

I have about 5 ideas...

Where does it bolt?

cafe750 · « **Reply #2 on:** January 30, 2009, 02:54:07 PM »

It looks like one rearset bracket, and a couple of other related linkage bitsas.

Really? · « **Reply #3 on:** January 30, 2009, 03:19:27 PM »

Quote from: cafe750 on January 30, 2009, 02:54:07 PM

It looks like one rearset bracket, and a couple of other related linkage bitsas.

Me thinkin' same thing.

mcpuffett · « **Reply #4 on:** January 30, 2009, 03:58:44 PM »

Does it have something to do with forward controls?

754 · « **Reply #5 on:** January 30, 2009, 06:58:36 PM »

I agree with forward controls ... frontsets...

HavocTurbo · « **Reply #6 on:** January 30, 2009, 08:06:38 PM »

Quote from: 754 on January 30, 2009, 06:58:36 PM

I agree with forward controls ... frontsets...

That's about where I was going...

mrbreeze · « **Reply #7 on:** January 30, 2009, 10:31:45 PM »

Looks like the right side top motor mount with a provision for a highway peg.

fishhead · « **Reply #8 on:** January 31, 2009, 05:51:42 AM »

Heres another picture of it put together. It should be easier to figure out now.

EDIT; Not a foward control, not a rear set or a foot peg mount. It bolts to the engine (somewhere on it). It is mechanical and specifially does something.

goon 1492 · « **Reply #9 on:** January 31, 2009, 05:57:37 AM »

I am going with forward controls and a highway foot pad mount.
dude your avatar keeps making me want to go watch cannon ball run....."Wheres the Paitent!!!"
And captain chaos! Da da DAAAAAAA!!!

754 · « **Reply #10 on:** January 31, 2009, 08:10:30 AM »

Jock E Shift..?

mystic_1 · « **Reply #11 on:** January 31, 2009, 08:29:18 AM »

Sure looks shifter-related, given the splines.

mystic_1

wrenchmuch · « **Reply #12 on:** January 31, 2009, 08:44:05 AM »

Steering damper mount

bwaller · « **Reply #13 on:** January 31, 2009, 08:50:33 AM »

Some sort of hand shifter conversion for a chop?

mystic_1 · « **Reply #14 on:** January 31, 2009, 08:51:10 AM »

OK, I think it reverses the shift pattern. One up, four down. A racing accessory, perhaps?

mystic_1

Soos · « **Reply #15 on:** January 31, 2009, 09:24:07 AM »

air shifter mount plate.

l8r

voxonda · « **Reply #16 on:** January 31, 2009, 09:28:58 AM »

Quote from: mystic_1 on January 31, 2009, 08:51:10 AM

OK, I think it reverses the shift pattern. One up, four down. A racing accessory, perhaps?

mystic_1

I am with Mystic!

754 · « **Reply #17 on:** January 31, 2009, 09:38:05 AM »

Part of a right hand shift conversion for flattrack or old britbikedogs & Sportsterdogs, that cant learn new tricks...

WFO · « **Reply #18 on:** January 31, 2009, 09:41:00 AM »

Iam going to go out on limb and say it's a motorcycle part.

mcpuffett · « **Reply #19 on:** January 31, 2009, 11:10:24 AM »

some type of parking brake mechanism? or security device? $:-\$ , cheers Mick.

Patrick · « **Reply #20 on:** January 31, 2009, 11:40:09 AM »

It is clearly a doohickey.

fishhead · « **Reply #21 on:** February 01, 2009, 05:23:55 AM »

Quote from: mystic_1 on January 31, 2009, 08:51:10 AM

OK, I think it reverses the shift pattern. One up, four down. A racing accessory, perhaps?

mystic_1

Mystic is correct.
It's either a:
1) reverse pattern shifter mechanism (for std.mounting of gear lever) or
2) shift pattern "corrector" for rear sets using the Std shift lever mounted in facing rearwards position.
I'll post a pic of it mounted in a few days. I came down with the flu and am stuck inside for a few days.

mystic_1 · « **Reply #22 on:** February 01, 2009, 07:21:19 AM »

Woohoo! I won the no-prize!

mystic_1

News:

Author Topic: Name that part! CB 750 (Read 2662 times)