« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: CB550 cafe in OZ  (Read 12437 times)

0 Members and 2 Guests are viewing this topic.

Offline Grumpol

  • Hot Shot
  • ***
  • Posts: 264
Re: CB550 cafe in OZ
« Reply #25 on: February 01, 2009, 10:52:53 PM »
The hardest part of extending the loom to reach would be getting the right colour coded wires if you were inclined to go that far.
Other than that i can see it being a relatively easy cut and shut job
Logged

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #26 on: February 01, 2009, 10:56:47 PM »
Quote from: Psychoblue23 on February 01, 2009, 10:48:59 PM
How do you plan on extending the wires to make it to the rear of the seat? Using a 2nd harness and chopping them up? I am curious, cuz I want to do the same thing. I love the hinge idea. great idea.

I did a full mock up before i stripped it all down for painting, so the wirings already done.I simply cut all wires and extended them ,soldering each joint and i went to the hassle of using the right coloured wires for each one.Them i wrapped them in black electrical tape like the factory does, you wouldnt even know its been extended.
Logged

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #27 on: February 15, 2009, 12:56:21 AM »
Some more photos, assembly is going a bit slower than i would have liked.But the Allballs bearing took awhile to arrive and are still waiting on parts to arrive from around the world.

It has the stock rims on at the moment just so i can move the old girl around a bit easier, cant wait to get the alloy rims back from the wheel builder.
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: CB550 cafe in OZ
« Reply #28 on: February 15, 2009, 01:23:00 AM »
Hi Aussie, is there a site where i can view those cafe seats?...i want one for an F2 project.

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #29 on: February 15, 2009, 01:32:13 AM »
Quote from: retro rocket on February 15, 2009, 01:23:00 AM
Hi Aussie, is there a site where i can view those cafe seats?...i want one for an F2 project.

Mick

Howdy Mick , i brought this one from brissie, a guy up ther makes them and sell them on ebay.His user name is (bron-moto) thats about all i know.
Logged

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,318
  • So, what do ya wanna talk about today?
Re: CB550 cafe in OZ
« Reply #30 on: February 15, 2009, 01:42:21 AM »
G'Day Wayne, that looks great mate, well done! I had a look at the 550 bottom end to see how you'd go taking the starter motor off without stripping the engine, and sorry mate, but I don't like your chances.........  ;) ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: CB550 cafe in OZ
« Reply #31 on: February 15, 2009, 02:06:29 AM »
Thanks aussie.... ;)


Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #32 on: March 20, 2009, 11:23:43 PM »
Build is coming along slowly, with only the seat to made and the alloy mudcatcher rims to be laced up. Thought i would put some pictures up of the progress
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: CB550 cafe in OZ
« Reply #33 on: March 21, 2009, 12:56:57 AM »
Looking good Aussie.

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline BARDAR

  • Full Member
  • *
  • Posts: 74
Re: CB550 cafe in OZ
« Reply #34 on: March 21, 2009, 01:35:57 AM »
Very nice!  :)  What exhaust is that??
Logged

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #35 on: March 21, 2009, 02:13:57 AM »
Quote from: BARDAR on March 21, 2009, 01:35:57 AM
Very nice!  :)  What exhaust is that??

Aughhh that exhaust system is whats called ,homemade .Knocked it up myself ,fair bit of mucking around bending shaping but worth it in the end.
Logged

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: CB550 cafe in OZ
« Reply #36 on: March 21, 2009, 07:24:56 AM »
Wayne

That is looking totally awesome.
I love the wicked pipes.
They really set the build off.

Cheers Mate
FJ
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB550 cafe in OZ
« Reply #37 on: March 21, 2009, 11:03:03 AM »
Wow, Aussie,

That Paul Smart Honda looks sharp as a tack.  Can't wait to see it with the new wheels.  What wheels did you go with?  Excel?  Akront?  DID?  Powdercoated or polished?
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #38 on: March 21, 2009, 09:26:29 PM »
Quote from: FunJimmy on March 21, 2009, 07:24:56 AM
Wayne

That is looking totally awesome.
I love the wicked pipes.
They really set the build off.

Cheers Mate
FJ

Thanks Jimmy, be good to get it out of the shed and get some decent photos of it.
Logged

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #39 on: March 21, 2009, 09:29:37 PM »
Quote from: CB750 Cafe Racer Fan on March 21, 2009, 11:03:03 AM
Wow, Aussie,

That Paul Smart Honda looks sharp as a tack.  Can't wait to see it with the new wheels.  What wheels did you go with?  Excel?  Akront?  DID?  Powdercoated or polished?

Well i seem to be getting a collection up, i was going with a set of Akront rims that i have but there smooth shoulders.Now i have also got my hands on a set of Mudcatcher alloy rims that i am awaiting delievery on, so these's will go on as soon as they arrive.
Logged

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #40 on: March 26, 2009, 10:07:56 PM »
Completly forgot to weld on a mounting plate on for the oil cooler, before i had the frame powder coated. So knocked up these mounts that clamp to the frame, perfect soulution for anybody who doesnt want to weld on anything to there frame.

Just have to wait now for some braided line and fittings.
Logged

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,318
  • So, what do ya wanna talk about today?
Re: CB550 cafe in OZ
« Reply #41 on: March 27, 2009, 03:17:52 AM »
Hey that's a neat looking radiator Wayne, where'd you get dat ting? Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #42 on: April 12, 2009, 04:02:29 PM »
I have finally finished the seat, The Ally Akront mudcatcher rims should be back this week from the wheel builders. ??? ??? ::)
And hopefully should have the alloy tank finished this week and on the bike.( a word of warning, if your thinking about building your own alloy tank take my advise and just go out and buy one ;D.But its nearly finished, the amount of man hours is incredible and i can see now why there so dear to buy)

Then its of to to the dyno, and start enjoying the bike ;D
Logged

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Re: CB550 cafe in OZ
« Reply #43 on: April 12, 2009, 05:31:29 PM »
   Hey you never said where the oil cooler came from.  Details?  And one detail I noticed about your seat - the lock mechanism isn't as out-of-sight-out-of-mind as I'd prefer, but then again you're probably not leaving it in the Wal-Mart parking lot.  Do they even have those down under?
   Great looking build so far, can't wait to see the wheels on there. Plus one on the pipes.  Maybe you can rustle up a Termigionni sticker to slap on there.  Wouldn't look out of place in my mind.
Logged
Just call me Timmaaaaay!!!

Offline rachet

  • Hot Shot
  • ***
  • Posts: 415
  • '77 CB750 F2
Re: CB550 cafe in OZ
« Reply #44 on: April 12, 2009, 05:44:17 PM »
I'm not sure how I missed this build, but I'm glad I found it!  Great Job, Keep us posted.

Rach-
Logged
But I need Tacos!  I need them or I will explode!

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #45 on: April 12, 2009, 10:54:26 PM »
Here is the mock up cardboard tank, and the start of the alloy work.The tanks nearly fininshed now and will post up some more photos soon of the different stages
Logged

Offline cben750f0

  • nothin draws attention like a classic bike!!
  • Master
  • *****
  • Posts: 1,612
  • '75 CB750F0 Gladstone NQLD OZ
Re: CB550 cafe in OZ
« Reply #46 on: April 13, 2009, 02:15:58 AM »
dam M8, hurry the hell up and finish!!!!!!

great work love it...

cant wait to see the tank...

peace brother
Logged
you are never to old, to act like a kid... be safe
funny thing,chasing someone down hill on a bike 30 years older than theirs..
he said \\\\\\\'it was like watching a 250kg unguided weapon getting stuck up you bum\\\\\\\ http://www.bikepics.com/members/trixtrem/

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #47 on: April 15, 2009, 12:36:11 AM »
few more of the tank construction
Logged

Offline aussie

  • Enthusiast
  • **
  • Posts: 163
Re: CB550 cafe in OZ
« Reply #48 on: April 15, 2009, 12:46:18 AM »
Getting there ;D
Logged

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: CB550 cafe in OZ
« Reply #49 on: April 15, 2009, 07:20:17 AM »
Wow! That's a big job indead.

Awesome work Wayne.

FJ
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0
Pages: 1 [2] 3   Go Up
« previous next »