Topic: 350F - Bottom Gasket Set - O Ring Question - PICS

[OakBehringer]

It would be really nice if they labeled the o-rings. I'd hate to put this on, torque the oil pan on, only to realize it was the wrong one.

Do I have this right?

Thanks!

[mattcb350f]

I'm really not sure if that's the one or not. The Honda part # for that O-ring is:

ORING - 91329-590-003 (16.5 mm x 2 mm)

...so if you had a caliper you could measure and find out if that's the one.

You could also do the pan last and start eliminating some of the othe O-rings in other places.

 Matt.

[OakBehringer]

Nice - thanks for that. I didn't know they'd have the precise diameter in there. I wonder if that's the outer or inner diameter? I'll measure it and go to town. 

Now that I think about it, I didn't split my cases, so I'm not even sure that I'd use any of the other ones!

[OakBehringer]

For anyone who might read this in the future, I ended up using the second one from the upper left.